VIA Technologies P4PA Manual de usuario

VIA Mainboard

User’s Manual

VIA P4PA - U &

VIA P4PA - UL

Version 1.0 - February 5th, 2002

P/N 99-51-010111

be reproduced or transmitted in any form without express written

authorization from VIA.

Trademarks

All trademarks are the property of their respective holders.

Data protection

All data should be backed-up prior to the installation of any drive unit or

storage peripheral. VIA will not be responsible for any loss of data resulting

from the use, disuse or misuse of this or any other VIA product.

No Warranty

VIA has made every effort to ensure the accuracy of the content of this

manual. However, it is possible that it may contain technical inaccuracies or

typographical or other errors. VIA will assume no liability for any

inaccuracy found in this publication, nor for damages, direct, indirect,

incidental, consequential or otherwise, that may result from such an

inaccuracy, including without limitation loss of data or profits.

VIA provides this manual “as is”, and does not issue a warranty of any

kind, express or implied, including without limitation implied warranties of

merchantability or fitness for a particular purpose.

The information provided in this manual is subject to change without

notice. VIA reserves the right to alter product designs, layouts or drivers

without notification.

iii

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case the user will be required to correct

the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party respon-

sible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

TRADEMARKS

All trademarks used in this manual are the property of their respective owners.

Intel and Pentium are registered trademarks of Intel Corporation.

PS/2 and OS/2 are registered trademarks of IBM Corporation.

Windows 95/98/98SE/2000 and Windows NT are registered trademarks of

Microsoft.

Netware is a registered trademark of Novell.

Award is a registered trademark of Award Software Inc.

NOTE

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection and protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

7. Place the power cord such a way that people cannot step on it. Do not

place anything over the power cord.

8. Always Unplug the Power Cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening. Doing so could cause damage or

electrical shock.

11. If any of the following situations arises, get the equipment checked by a

service personnel:

* The power cord or plug is damaged

* Liquid has penetrated into the equipment

* The equipment has been exposed to moisture

* The equipment does not work well or does not work according to

the User’s Manual.

* The equipment has dropped or damaged

* The equipment has been visably damaged

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENTUNCONDI-

TIONED, STORAGE TEMPERATURE ABOVE 600 C (1400F), IT MAY

DAMAGE THE EQUIPMENT.

Box Contents

•1 x VIA Mainboard

•1 x User’s manual

• 1 x Quick Installation Guide

•1 x Floppy ribbon cable

•1 x ATA-66/100/133 Hard drive ribbon cable

•1 x 2 Port USB 2.0/1.1 Module

•1 x Driver Utilities CD

•1 x I/O Bracket

Contents

Chapter 1. Specifications ..................... 1-1

Mainboard Specifications .................................................. 1-2

Mainboard Layout ............................................................ 1-4

Connectors Guide ............................................................. 1-5

Chapter 2. Installation.......................... 2-1

CPU Installation ................................................................ 2-2

CPU Installation ............................................................... 2-2

CPU Core Speed .............................................................. 2-3

CPU Fan Installation ........................................................ 2-3

Memory Installation ........................................................... 2-5

DDR Module Installation .................................................. 2-6

Power Supply ................................................................... 2-7

ATX 20-Pin Power Connector: ATXPWR ....................... 2-7

ATX 12V Power Connector: AUX12V............................ 2-7

Back Panel ....................................................................... 2-8

Mouse Connector: JMS1 .................................................. 2-8

Keyboard Connector: JKB1 ............................................. 2-8

USB Port Connectors....................................................... 2-9

Parallel Port Connector: LPT1 ......................................... 2-9

Serial Port Connectors: COM 1 & COM 2.................... 2-10

MIDI/Game Connector .................................................. 2-10

Audio Port Connectors ................................................... 2-10

RJ45 NIC Port (optional) ............................................... 2-10

Connectors ..................................................................... 2-11

Floppy Disk Drive Connector: FDD ................................ 2-11

IrDA Infrared Module Connector: IR ............................. 2-11

Hard Disk Connectors: IDE1 & IDE2 ........................... 2-12

CD-In Connector: CD_IN ............................................. 2-13

Aux Line-In Connector: AUX_IN ................................. 2-13

vii

Modem-In Connector: Modem_IN ................................ 2-13

Fan Power Connectors: CPU/SYS/PWR FAN ............. 2-14

Case Connectors: F_PANEL ......................................... 2-14

Digital Audio Connector: SPDIF .................................... 2-16

PC Smart Card Reader: SCR_14P ................................ 2-16

USB pin-header: USB3/4 ............................................... 2-17

Wake-On LAN Connector: WOL .................................. 2-17

Jumpers .......................................................................... 2-18

Clear CMOS Jumper: CLEAR_CMOS ......................... 2-18

Slots ............................................................................... 2-19

AGP (Accelerated Graphics Port) Slot .......................... 2-19

PCI Slots ........................................................................ 2-19

CNR (Communication Network Riser) .......................... 2-19

PCI Interrupt Request Routing ....................................... 2-20

Chapter 3. BIOS Setup......................... 3-1

Entering Setup ................................................................... 3-2

Control Keys .................................................................... 3-2

Getting Help ...................................................................... 3-3

The Main Menu ................................................................ 3-4

Standard CMOS Features ................................................ 3-6

Advanced BIOS Features ................................................. 3-8

Advanced Chipset Features............................................. 3-11

Integrated Peripherals...................................................... 3-13

Power Management Setup .............................................. 3-17

PNP/PCI Configurations ................................................. 3-22

PC Health Status............................................................. 3-24

Frequency/Voltage Control .............................................. 3-25

Load Fail-Safe Defaults................................................... 3-28

Load Optimized Defaults ................................................. 3-29

viii

Set Supervisor/User Password ........................................ 3-30

Save & Exit Setup........................................................... 3-32

Exit Without Saving ......................................................... 3-33

Chapter 4. Software Setup ................... 4-1

VIAApollo P4X266A Chipset Drivers .............................. 4-2

VIAAudio Driver ............................................................ 4-12

Realtek Network Driver .................................................. 4-13

ITE Smart Guardian Installation ....................................... 4-20

ITE Smart Guardian User’s Manual ................................. 4-22

1-1

Specifications

The VIA P4PA mainboard is based around the

VIA Apollo P4X266A chipset, which brings support

for high-performance DDR266 SDRAM to the Intel®

Pentium® 4 platform. VIA’s advanced V-Link controller

brings optimal system efficiency by effectively dou-

bling bandwidth between the chipset’s north and south

bridges. Designed for the latest 478-pin Pentium®4

processors, these ATX sized mainboards are the per-

fect choice for Pentium 4 based high- performance PCs,

servers and workstations.

This chapter includes the following sections:

Mainboard Specifications 1-2

Mainboard Layout 1-4

Connectors Guide 1-5

1-2

Chapter 1

CPU

•Supports Intel®Pentium®4 processors in the 478 pin package

•Supports 1.5GHz, 1.6GHz, 1.7GHz, 1.8GHz, 1.9GHz, 2GHz and upwards

Chipset

•VIAApollo P4X266Achipset (VT8753 & VT8233A)

- Supports Intel®Pentium®4 processors with 400MHz (100MHz QDR) CPU

Front Side Bus (FSB)

- AGP v2.0 compliant with 4x transfer mode

- High Bandwidth V-Link Client controller

- Integrated Hardware Sound Blaster/Direct Sound AC’97 audio

- Ultra DMA 66/100/133 master mode PCI EIDE controller

- ACPI 1.0B and APM 1.2 compliant

Main Memory

•3 x 184-pin DDR DIMM slots

•Supports up to 3GB of DDR266 SDRAM (PC2100/PC1600)

•Supports 2.5v DDR266 SDRAM

Slots

•1 x AGP (Accelerated Graphics Port) 4X slot

•6 x PCI 2.2 32-bit PCI bus slots (supports 3.3v/5v PCI bus interface)

•1 x CNR (Communication Network Riser) slot

Onboard IDE

•Integrated IDE controller provides IDE HDD/CD-ROM with PIO, Bus Mas-

ter and Ultra DMA 66/100/133 operation modes

•Can connect up to four IDE devices

Onboard Peripherals

•1 floppy port supports 1 x FDD (up to 2.88MB, Japan 3 Mode Floppy

Supported)

Mainboard Specifications

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de VIA Technologies

VIA Technologies

VIA Technologies VT310-DP Manual de usuario

VIA Technologies

VIA Technologies KT600 Manual de usuario

VIA Technologies

VIA Technologies EPIA-NL Manual de usuario

VIA Technologies

VIA Technologies EPIA-CN10000EG - VIA Motherboard - Mini ITX Manual de usuario

VIA Technologies

VIA Technologies EPIA LN-Series Manual de usuario

VIA Technologies

VIA Technologies EPIA Mini-ITX Manual de instrucciones

VIA Technologies

VIA Technologies K8T890 Manual de usuario

VIA Technologies

VIA Technologies P4XB-S Manual de usuario

VIA Technologies

VIA Technologies P4X266-PE11-L Manual de usuario

VIA Technologies

VIA Technologies epia-m860 Manual de usuario

VIA Technologies

VIA Technologies EPIA-M850 Manual de usuario

VIA Technologies

VIA Technologies VAB-820 Manual de usuario

VIA Technologies

VIA Technologies VAB-800 Manual de usuario

VIA Technologies

VIA Technologies EPIA-M720 Manual de usuario

VIA Technologies

VIA Technologies NAB-7400 Manual de usuario

VIA Technologies

VIA Technologies KT600 Manual de usuario

VIA Technologies

VIA Technologies EPIA-M850 Manual de usuario

VIA Technologies

VIA Technologies KT400A Manual de usuario

VIA Technologies

VIA Technologies VX800 Series Manual de usuario

VIA Technologies

VIA Technologies EPIA-SP13000 - VIA Motherboard - Mini ITX Manual de usuario

VIA Technologies

VIA Technologies EPIA-CL Manual de usuario

VIA Technologies

VIA Technologies VB8002 Manual de usuario

VIA Technologies

VIA Technologies Board Manual de usuario

VIA Technologies

VIA Technologies VAB-1000 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario