VIA Technologies P4PB ULTRA-URL Manual de usuario

VIA Mainboard

User’s Manual

P4PB ULTRA-URL

Version 1.0 - - August 30th, 2002

P/N 99-51-011011

be reproduced or transmitted in any form without express written

authorization from VIA.

Trademarks

All trademarks are the property of their respective holders.

Data protection

All data should be backed-up prior to the installation of any drive unit or

storage peripheral. VIA will not be responsible for any loss of data resulting

from the use, disuse or misuse of this or any other VIA product.

No Warranty

VIA has made every effort to ensure the accuracy of the content of this

manual. However, it is possible that it may contain technical inaccuracies

or typographical or other errors. VIA will assume no liability for any

inaccuracy found in this publication, nor for damages, direct, indirect,

incidental, consequential or otherwise, that may result from such an

inaccuracy, including without limitation loss of data or profits.

VIA provides this manual “as is”, and does not issue a warranty of any

kind, express or implied, including without limitation implied warranties of

merchantability or fitness for a particular purpose.

The information provided in this manual is subject to change without

notice. VIA reserves the right to alter product designs, layouts or drivers

without notification.

iii

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case the user will be required to correct

the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party respon-

sible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

TRADEMARKS

All trademarks used in this manual are the property of their respective owners.

Intel and Pentium are registered trademarks of Intel Corporation.

PS/2 and OS/2 are registered trademarks of IBM Corporation.

Windows 95/98/98SE/2000/XP and Windows NT are registered trademarks of

Microsoft.

Netware is a registered trademark of Novell.

Award is a registered trademark of Award Software Inc.

NOTE

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection and protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/

220V before connecting the equipment to the power inlet.

7. Place the power cord such a way that people cannot step on it. Do not

place anything over the power cord.

8. Always Unplug the Power Cord before inserting any add-on card or

module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening. Doing so could cause damage or

electrical shock.

11. If any of the following situations arises, get the equipment checked by a

service personnel:

* The power cord or plug is damaged

* Liquid has penetrated into the equipment

* The equipment has been exposed to moisture

* The equipment does not work well or does not work according to

the User’s Manual.

* The equipment has dropped or damaged

* The equipment has been visably damaged

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED, STORAGE TEMPERATURE ABOVE 600 C (1400F),

IT MAY DAMAGE THE EQUIPMENT.

• 1 x Floppy Ribbon Cable

• 2 x ATA-33/66/100/133 IDE Ribbon Cable

• 1 x 4-Port USB 2.0/1.1 Module

• 1 x SPDIF Bracket

• 1 x I/O Bracket

• 1 x Driver Utilities CD

• 1 x Smart Media Reader

Box Contents

• 1 x VIA Mainboard

• 1 x User’s Manual

• 1 x Quick Installation Guide

Contents

Chapter 1. Specifications ..................... 1-1

MainboardSpecifications .................................................. 1-2

Mainboard Layout ............................................................ 1-4

Connectors Guide ............................................................. 1-5

Chapter 2. Installation.......................... 2-1

CPUInstallation ................................................................ 2-2

CPU Installation ............................................................... 2-2

CPU Core Speed.............................................................. 2-3

CPU Fan Installation ........................................................ 2-3

MemoryInstallation ........................................................... 2-5

DDR Module Installation .................................................. 2-6

Power Supply ................................................................... 2-7

ATX 20-Pin Power Connector: ATXPWR ....................... 2-7

ATX 12V Power Connector: AUX12V ........................... 2-7

Back Panel ....................................................................... 2-8

Mouse Connector: JMS1 .................................................. 2-8

Keyboard Connector: JKB1 ............................................. 2-8

USB Port Connectors....................................................... 2-9

Parallel Port Connector: LPT1 ......................................... 2-9

Serial Port Connectors: COM 1 & COM 2.................... 2-10

MIDI/Game Connector .................................................. 2-10

Audio Port Connectors ................................................... 2-10

Connectors ..................................................................... 2-11

Floppy Disk Drive Connector: FDD ................................ 2-11

IrDA Infrared Module Connector: SIR ........................... 2-11

Hard Disk Connectors: IDE1 & IDE2 ........................... 2-12

IDE RAID Connectors: IDE3 & IDE4.......................... 2-13

CD-In Connector: CD_IN ............................................. 2-14

Aux Line-In Connector: AUX_IN ................................. 2-14

vii

Modem-In Connector: Modem_IN ................................. 2-14

Fan Power Connectors: CPU/SYS FAN ......................... 2-15

Case Connectors: F_PANEL ........................................... 2-15

SPDIF Connector: SPDIF_Header ................................. 2-17

USB pin-header: USB3~10 ............................................. 2-18

Wake-On LAN Connector: WOL ................................... 2-18

Wake-On Ring Connector: WOR .................................... 2-19

Secure Digital and Memory Stick Connectors: SD/MS ... 2-19

PC Smart Card Reader: SCR .......................................... 2-20

Jumpers.......................................................................... 2-21

Clear CMOS Jumper: CLEAR_CMOS ........................... 2-21

Audio Codec Auto Detect Jumper: OB_CODEC ............ 2-22

CPU FSB Setting Jumper: FSBJP .................................. 2-22

Onboard Audio Jumper: Audio_Enable ........................... 2-23

Onboard Front Audio Jupper: F_Audio ........................... 2-23

Slots............................................................................... 2-24

AGP (Accelerated Graphics Port) Slot ............................ 2-24

PCI Slots ......................................................................... 2-24

CNR (Communication Network Riser) ........................... 2-24

PCI Interrupt Request Routing ....................................... 2-25

Chapter 3. BIOS Setup ........................ 3-1

Entering Setup.................................................................. 3-2

Control Keys.................................................................... 3-2

Getting Help .................................................................... 3-3

The Main Menu................................................................ 3-4

Standard CMOS Features ................................................ 3-6

Advanced BIOS Features ................................................ 3-8

Advanced Chipset Features ........................................... 3-11

Integrated Peripherals .................................................... 3-13

Power Management Setup.............................................. 3-17

viii

PNP/PCI Configurations ................................................ 3-22

PC Health Status ............................................................ 3-24

Frequency/Voltage Control ............................................ 3-25

Load Fail-Safe Defaults................................................. 3-28

Load Optimized Defaults ............................................... 3-29

Set Supervisor/User Password ...................................... 3-30

Save & Exit Setup.......................................................... 3-32

Exit Without Saving ....................................................... 3-33

Chapter 4. Software Setup ................... 4-1

Driver Utilities CD Content ............................................. 4-2

Getting Started .................................................................. 4-2

Running the Driver Utilities CD ........................................ 4-2

CD Content ....................................................................... 4-2

Appendix ............................................. A-1

Introduction to RAID ...................................................... A-1

RAID 0 ........................................................................... A-1

RAID 1 ........................................................................... A-1

Getting Started ................................................................ A-2

Installing the Hard Drives............................................... A-2

Creating Your Disk Array ............................................... A-3

Creating an Array for Performance ................................. A-4

Creating a Security Array With New Drives .................. A-4

Creating a Security Array With An Existing Data Drive . A-5

1-1

Specifications

The VIA P4PB ULTRA mainboard is based

around the VIA Apollo P4X400 chipset, which brings

support for high-performance DDR SDRAM to the

Intel®Pentium® 4 platform. VIA’s advanced V-Link

controller brings optimal system efficiency by effec-

tively doubling bandwidth between the chipset’s north

and south bridges. Designed for the latest 478-pin

Pentium®4 processors, these ATX sized mainboards

are the perfect choice for Pentium 4 based high- per-

formance PCs, servers and workstations.

This chapter includes the following sections:

Mainboard Specifications 1-2

Mainboard Layout 1-4

Connectors Guide 1-5

1-2

Chapter 1

CPU

•Supports Intel®Pentium®4 Willamette / Northwood and Celeron®proces-

sors in the 478 pin package

•Supports 1.5GHz, 1.6GHz, 1.7GHz, 1.8GHz, 1.9GHz, 2GHz, 2.2GHz , 2.

26GHz, 2.4GHz, 2.53GHz and upwards

Chipset

•VIA Apollo P4X400 chipset (VT8754 & VT8235)

- Supports Intel®Pentium®4 processors with 400MHz (100MHz QDR)

and 533MHz (133MHz QDR) CPU Front Side Bus (FSB)

- AGP v2.0 / v3.0 compliant with 4x / 8x (1.5V) transfer mode

- High Bandwidth V-Link 533 MB/s 8-bit Client controller

- Integrated Hardware Sound Blaster/Direct Sound AC’97 audio

- Ultra DMA 66 / 100 / 133 master mode PCI EIDE controller

- ACPI 1.0B and APM 1.2 compliant

Main Memory

•3 x 184-pin DDR DIMM sockets

• Supports up to 3GB of 2.5V DDR333 / 400 (limited) SDRAM (PC3200 /

PC2700 / PC2100 / PC1600) with ECC

Slots

• 1 x AGP (Accelerated Graphics Port) 4x / 8x (1.5V) slot

• 6 x PCI 2.2 32-bit PCI bus slots (supports 3.3v / 5v PCI bus interface)

• 1 x CNR (Communication Network Riser) slot

Onboard IDE

• Integrated IDE controller provides IDE HDD/CD-ROM with PIO, Bus Mas-

ter and Ultra DMA 66 / 100 / 133 operation modes

• Can connect up to two channels for four IDE devices

Mainboard Specifications

Tabla de contenidos

Otros manuales de Placa madre de VIA Technologies

VIA Technologies

VIA Technologies EPIA-P700 Manual de usuario

VIA Technologies

VIA Technologies EPIA-MII Manual de usuario

VIA Technologies

VIA Technologies 7001G - VIA Mini ITX Motherboard Manual de usuario

VIA Technologies

VIA Technologies EPIA-N800 Manual de usuario

VIA Technologies

VIA Technologies EPIA-M920 Manual de usuario

VIA Technologies

VIA Technologies KT880 Manual de usuario

VIA Technologies

VIA Technologies VAB-630 Manual de usuario

VIA Technologies

VIA Technologies VAB-820 Manual de usuario

VIA Technologies

VIA Technologies EPIA-EN12000EG - VIA Motherboard - Mini ITX Manual de usuario

VIA Technologies

VIA Technologies EPIA-CN10000EG - VIA Motherboard - Mini ITX Manual de usuario

VIA Technologies

VIA Technologies EPIA-M850 Manual de usuario

VIA Technologies

VIA Technologies P4M890DMP VT8237R Plus Manual de usuario

VIA Technologies

VIA Technologies EPIA-M920 Manual de usuario

VIA Technologies

VIA Technologies K8T800 Manual de usuario

VIA Technologies

VIA Technologies EPIA-M850 Manual de usuario

VIA Technologies

VIA Technologies EPIA-P910 Manual de usuario

VIA Technologies

VIA Technologies P4MA PRO Manual de usuario

VIA Technologies

VIA Technologies EPIA-5000 - VIA Motherboard - Mini ITX Manual de usuario

VIA Technologies

VIA Technologies EPIA-P830 Manual de usuario

VIA Technologies

VIA Technologies EPIA-ML8000AG - VIA Motherboard - Mini ITX Manual de usuario

VIA Technologies

VIA Technologies Zida BX983D Manual de usuario

VIA Technologies

VIA Technologies EPIA-NX Manual de usuario

VIA Technologies

VIA Technologies EPIA-PD Mini-ITX Manual de usuario

VIA Technologies

VIA Technologies PT-TVBT Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario