Unicol VCC1 Manual de usuario

WARNING

Please carefully inspect the product before assembling. If you notice any apparent damage, call your carrier

claims agent and do not continue the installation until it has been reviewed. Please watch for pinch points.

Do not put your ﬁngers between moveable parts. Do not tamper with or disassemble any spring loaded

parts. Before installing, make sure that the supporting surface will support ﬁve times the combined load of

the solution and the hardware. Never exceed the maximum load capacity. Please also layout all components

to ensure that you have all of the required parts before proceeding (see BOM list on following page). Use of

this product for anything other than its speciﬁed use may result in failure or personal injury. This product is

intended for indoor use only. We recommend using a qualiﬁed trades person for installation. Use an assistant

or lifting equipment to lift and position products.

For support, please call: +44 (0)1865 767676 or email: sales@unicol.com

Revised 28/09/22

01865 767676

sales@unicol.com

www.unicol.com

*Please check model specific details before installing*

Pillar Clamps - VCC1 & VCC2

Screen Size: 70” Guide Max. Weight: 120kg

VCC1 VCC2

2Revised 28/09/22

COMPONENTS

01865 767676

sales@unicol.com

www.unicol.com

INSTALLERS REQUIRED

1-2

#TOOLS REQUIRED

117mm Spanner

1 2

# EQUIPMENT QTY

1Straps 2

2Connecting Bars 4

3Studding with Fixings 4

4Fixing Cover VCC1 (VCC2) 1 (0)

5Fixing Cover with Arm VCC1 (VCC2) 1 (2)

NOTE: Each VCC is custom made to ﬁt the pillar

speciﬁed and once tightened clamp it in position.

There is no need to drill into the pillar.

Multi-arm units are assembled in the same way.

01865 767676

sales@unicol.com

www.unicol.com

Revised 28/09/22

STEP 1 – Place both straps around your pillar, either on the ﬂoor or on a support. Place connecting bars

into slots in straps and push the studding provided through the holes to attach them. NOTE: The open

channel section of the bar must be positioned against the wall of the strap.

STEP 2 – Fix the studding together loosely using the plain and split washers and M10 nuts.

Plain Washer

Split Washer

M10 Nut

4Revised 28/09/22

01865 767676

sales@unicol.com

www.unicol.com

STEP 3 – Fix covers (loosely) to the Strap connecting bars with the 4 x M10 x 25 hex screws provided. Lift

the whole unit to the desired height and tighten studding so that it clamps the straps to the pillar. Tighten

cover screws. The VCC1 has an arm on one cover only. The VCC2 has arms on both covers.

STEP 4 – Connect direct ﬁtting adapter (ordered separately) to peg for screen or projector suspension.

A through bolt (supplied with the adapter) must be used to connect the adapter to the peg. Take up any

slack using the grub screws in the adapter socket.

PS1 Screen

Adapter shown

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Rack y soporte de Unicol

Unicol

Unicol AV2X2T Manual de usuario

Unicol

Unicol VERTISLIDE VTS1 Manual de usuario

Unicol

Unicol Parabella Manual de usuario

Unicol

Unicol PZW TILTING MOUNT Manual de usuario

Unicol

Unicol AVECTA TWIN SCREEN ACHP Manual de usuario

Unicol

Unicol GYROLOCK Manual de usuario

Unicol

Unicol SBM Manual de usuario

Unicol

Unicol VS1000 Manual de usuario

Unicol

Unicol RH200UHD Manual de usuario

Unicol

Unicol AXIA TITAN Manual de usuario

Unicol

Unicol RH200HD Manual de usuario

Unicol

Unicol ODH Manual de usuario

Unicol

Unicol WB0 Manual de usuario

Unicol

Unicol AZENITH VSX1800SC Manual de usuario

Unicol

Unicol RH100 Manual de usuario

Unicol

Unicol NST1 Manual de usuario

Unicol

Unicol ADAPTA-WALL VWP0 Manual de usuario

Unicol

Unicol ODS DOUBLE SIDED KIOSK Manual de usuario

Unicol

Unicol PA2 Manual de usuario

Unicol

Unicol AX12P Manual de usuario

Unicol

Unicol KP Kit Manual de usuario

Unicol

Unicol NEC W82 Manual de usuario

Unicol

Unicol GKUX Manual de usuario

Unicol

Unicol TVV1 Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario