Unicol TVV1 Manual de usuario

WARNING

Please carefully inspect the product before assembling. If you notice any apparent damage, call your

carrier claims agent and do not continue the installation until it has been reviewed. Please watch for

pinch points. Do not put your ﬁngers between moveable parts. Do not tamper with or disassemble any

spring loaded parts. Before installing, make sure that the supporting surface will support ﬁve times the

combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also

layout all components to ensure that you have all of the required parts before proceeding (see BOM list

on following page). Use of this product for anything other than its speciﬁed use may result in failure or

personal injury. This product is intended for indoor use only. We recommend using a qualiﬁed trades

person for installation. Use an assistant or lifting equipment to lift and position products.

For support, please call: +44 (0)1865 767676 or email: [email protected]

Revised 15/12/20

01865 767676

[email protected]

www.unicol.com

*Please check model speciﬁc details before installing*

TVV1 / TVL1 / TVT1 / TVB1

Screen Size: 15-40” Guide Max. Weight: 15kg

01865 767676

[email protected]

www.unicol.com

2Revised 15/12/20

COMPONENTS

INSTALLERS REQUIRED

1-2

# DESCRIPTION QTY

11000mm Column 1

2Single Column VESA Mount 1

3Tevella Base 1

4Column Support Ring 1

5 Alternative Bases -

#TOOLS REQUIRED

1 3/16th Allen Key

2 5mm Allen Key

01865 767676

[email protected]

www.unicol.com

Revised 15/12/20

STEP 1

Check the jaws of the column grip, if you can push

them together to ﬁt a column over, ignore this step.

If you can’t, you will need to loosen the screw on

the column grip to close them.

Thread cabling through bottom of base into column

grips as highlighted above.

STEP 2

Place the column support ring over the crocodile

lug with the straight edge facing the rear of the

base (as shown above).

Thread the cabling through the column and place

the column with holes, located approx 75mm from

the bottom, over the crocodile lugs on the base.

STEP 3

Once placed, tighten the grub screw to secure into

place.

STEP 4

Locate the mounting holes on the back of your

screen. Line the VESA mount up and using the

manufacturer recommended screws, attach the

mount to the back of the screen.

01865 767676

[email protected]

www.unicol.com

Revised 15/12/20

STEP 5

Slide the mount and adapter over the column and

position at the desired height. When happy, tighten

the grub screw to secure the mount and screen into

position.

STEP 6

Loosen the screws at the side of the mount to set

the angle of the screen. Once in position, retighten

the screws.

STEP 1

Position ﬂoor plate and mark through the screw

holes (arrows above) where it will be positioned.

Before you screw through, ensure any cables

that are going underneath the plate are threaded

through the column grips (circled above). Continue

with Step 2.

STEP 1

Before you begin, make sure the base is stable and

ensure the brakes are on on the front two castors.

Loosen the screws on the column grips to close

them.

Thread cabling through bottom of base into column

grips as highlighted above. Continue with Step 2.

BOLT DOWN TROLLEY

Este manual sirve para los siguientes modelos

Otros manuales de Rack y soporte de Unicol

Unicol

Unicol Powalift Manual de usuario

Unicol

Unicol GKUX Manual de usuario

Unicol

Unicol SBM Manual de usuario

Unicol

Unicol pozimount PZX Manual de usuario

Unicol

Unicol NEC W32-65L Manual de usuario

Unicol

Unicol RH200UHD Manual de usuario

Unicol

Unicol AV2X2T Manual de usuario

Unicol

Unicol AVECTA TWIN SCREEN ACHP Manual de usuario

Unicol

Unicol NST1 Manual de usuario

Unicol

Unicol AX12P Manual de usuario

Unicol

Unicol PZW TILTING MOUNT Manual de usuario

Unicol

Unicol AXIA TITAN Manual de usuario

Unicol

Unicol NEC W82 Manual de usuario

Unicol

Unicol ODS DOUBLE SIDED KIOSK Manual de usuario

Unicol

Unicol VS1000 Manual de usuario

Unicol

Unicol PA2 Manual de usuario

Unicol

Unicol KP Kit Manual de usuario

Unicol

Unicol RH100 Manual de usuario

Unicol

Unicol VERTISLIDE VTS1 Manual de usuario

Unicol

Unicol RH200HD Manual de usuario

Unicol

Unicol VCC1 Manual de usuario

Unicol

Unicol TCAVT Manual de usuario

Unicol

Unicol AZENITH VSX1800SC Manual de usuario

Unicol

Unicol ADAPTA-WALL VWP0 Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario