Ubiquiti US-16-XG Manual de usuario
UniFi Switch Power Cord Rack-Mount Brackets (Qty. 2)
Bracket Screws (Qty. 8) Mounting Screws (Qty. 4) Cage Nuts (Qty. 4)
Package Contents
Installation Requirements
Phillips screwdriver (for rack- or wall-mounting)
Standard-sized, 19” wide rack with a minimum of 1U height available (for rack-mounting)
Use compatible ber SFP+ modules with the appropriate ber optic cabling. For
information about compatible ber SFP+ modules, visit:
community.ubnt.com/uni
For indoor applications, use Category 6A (or above) UTP cabling approved for indoor use.
For outdoor applications, shielded Category 6A (or above) cabling should be used for all
wired Ethernet connections and should be grounded through the AC ground of the power
supply.
We recommend that you protect your networks from harmful outdoor environments and
destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For
more details, visit:
ui.com/toughcable
Note:
Although the cabling can be located outdoors, the UniFi Switch itself should be
housed inside a protective enclosure.
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.6 (1.8 or newer recommended)
Web Browser: Google Chrome (Other browsers may have limited functionality.)
US-16-XG Quick Start Guide
System LED
SFP+ Speed/Link/Act LED (Ports 1 - 12)
RJ45 Speed/Link/Act LED (Ports 13 - 16)
SFP+ (Ports 1 - 12)
RJ45 (Ports 13 - 16)
Reset Button
UniFi Controller software v5.4 or newer, available at:
ui.com/download/uni
Hardware Overview
Click here
for detailed descriptions.
Off No Link
Green Solid: 1 Gbps Link Established
Flashing: Activity
White Solid: 10 Gbps Link Established
Flashing: Activity
Off No Link
Green Solid: 1 Gbps Link Established
Flashing: Activity
White Solid: 10 Gbps Link Established
Flashing: Activity
Hot-swappable SFP+ ports support 1 Gbps and 10 Gbps connections.
RJ45 ports support 1 Gbps and 10 Gbps Ethernet connections.
This button serves two functions for the UniFi Switch:
Restart Press and release the Reset button quickly.
US-16-XG Quick Start Guide
Console Port
DC Input
Power Port
Restore to Factory Default Settings Press and hold the Reset button for more than ve
seconds.
Console Port
RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-
DB9, serial console cable, also known as a rollover cable, to connect the Console port to
your computer. Then congure the following settings as needed:
Baud rate 115200
Data bits 8
Parity NONE
Stop bits 1
Flow control NONE
The 48/24VDC input can connect a redundant or stand-alone DC power source (not
included) with minimum power: 56W, 57 to 20V.
Note:
You can use the redundant DC power source as a hot spare; if the internal
AC/DC power supply no longer provides power, the UniFi Switch will switch to
the DC power source without interrupting its operation.
Connect the included Power Cord to the Power port.
Hardware Installation
Mounting in a Rack (Optional)
1.
US-16-XG Quick Start Guide
2.
OR
US-16-XG Quick Start Guide
Connecting Power
1.
US-16-XG Quick Start Guide
2.
Connecting SFP+
1.
US-16-XG Quick Start Guide
2.
3.
US-16-XG Quick Start Guide
Software Installation
Download and install the latest version of the UniFi Controller software at
ui.com/download/uni
and follow the on-screen instructions.
Note:
If you already have UniFi Controller v5.4 or higher installed, go to the section,
Adopting the UniFi Switch.
After you have installed the software and run the UniFi Installation Wizard, a login screen will
appear for the UniFi Controller management interface. Enter the username and password
that you created and click Sign In.
US-16-XG Quick Start Guide
You can manage your network and view network statistics using the UniFi Controller
management interface.
To adopt the UniFi Switch, proceed to the section, Adopting the UniFi Switch.
For information on conguring and using the UniFi Controller software, refer to the User
Guide on the website:
ui.com/download/uni
Adopting the UniFi Switch
1. From the UniFi Controller dashboard, click Devices in the left menu bar.
2. Locate the UniFi Switch in the list of devices under the Model column. Click Adopt.
3. The System LED on the UniFi Switch will turn blue to conrm that it has been successfully
adopted.
US-16-XG Quick Start Guide
Otros manuales para US-16-XG
4
Otros manuales de Cambiar de Ubiquiti
Ubiquiti
Ubiquiti UniFi USW-Pro-48-POE Manual de usuario
Ubiquiti
Ubiquiti UniFi SWITCH 8 60W Manual de usuario
Ubiquiti
Ubiquiti ES-24-250W Manual de usuario
Ubiquiti
Ubiquiti USW-24 Manual de usuario
Ubiquiti
Ubiquiti UniFi USW-Pro-24-POE Manual de usuario
Ubiquiti
Ubiquiti EdgeSwitch ES-10XP Manual de usuario
Ubiquiti
Ubiquiti EdgeSwitch 48 LITE Manual de usuario
Ubiquiti
Ubiquiti US-16-XG Manual de usuario
Ubiquiti
Ubiquiti USW--Pro--48 Manual de usuario
Ubiquiti
Ubiquiti ES-24-250W Manual de usuario
Ubiquiti
Ubiquiti USW-48-POE Manual de usuario
Ubiquiti
Ubiquiti USW-Pro-24 Manual de usuario
Ubiquiti
Ubiquiti US-16-XG Manual de usuario
Ubiquiti
Ubiquiti US-24 Manual de usuario
Ubiquiti
Ubiquiti UniFi USW-16-POE Manual de usuario
Ubiquiti
Ubiquiti UniFi SWITCH 48 Manual de usuario
Ubiquiti
Ubiquiti UniFi USW-Industrial Manual de usuario
Ubiquiti
Ubiquiti UniFi US-48-750W Manual de usuario
Ubiquiti
Ubiquiti ES-5XP Manual de usuario
Ubiquiti
Ubiquiti TS-5-POE ToughSwitchPoE Manual de usuario
