TRENDnet TEG-S40TXE Manual de usuario
TEG-S40TXE
4-Port 10/100/1000Mbps
Copper Gigabit Ethernet
Switch with External Power
Supply
User’s Guide
FCC Warning
This equipment has been tested and found to comply with the
regulations for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this user’s guide, may
cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct
the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference, in which case the user
may be required to take adequate measures.
VCCI Warning
This is a product of VCCI Class A Compliance.
iii
P/N : 1907GSW304T5000
TABLE OF CONTENTS
ABOUT THIS GUIDE........................................1
TERMS....................................................................................1
OVERVIEW OF THIS USER’S GUIDE.................................1
INTRODUCTION..............................................2
GIGABIT ETHERNET TECHNOLOGY................................2
SWITCHING TECHNOLOGY.............................................3
FEATURES ..............................................................................4
UNPACKING AND SETUP..............................6
UNPACKING..........................................................................6
SETUP.....................................................................................6
CONNECTING NETWORK CABLE.....................................7
IDENTIFYING EXTERNAL COMPONENTS..9
FRONT PANEL.......................................................................9
REAR PANEL .......................................................................10
LED INDICATORS..............................................................10
TECHNICAL SPECIFICATIONS...................13
1
ABOUT THIS GUIDE
This user’s guide tells you how to install your 4-Port
10/100/1000Mbps Copper Gigabit Ethernet Switch and how to
connect it to your Gigabit Ethernet network.
Terms
For simplicity, this documentation uses the terms “Switch”
(first letter upper case) to refer to the 4-Port 1000BASE-T
Gigabit Ethernet Switch, and “switch” (first letter lower case) to
refer to all Ethernet switches, including this 4-Port 1000BASE-
TGigabit Ethernet Switch.
Overview of this User’s Guide
Introduction. Describes the Switch and its features.
Unpacking and Setup. Helps you get started with the
basic installation of the Switch.
Identifying External Components. Describes the front
panel, rear panel and LED indicators of the Switch.
Technical Specifications. Lists all the technical
specifications of the Switch.
2
INTRODUCTION
This section describes the features of the Gigabit Ethernet
Switch, as well as providing some background information about
Gigabit Ethernet and switching technology.
Gigabit Ethernet Technology
Gigabit Ethernet is an extension of IEEE 802.3ab Ethernet
utilizing the same packet structure, format, and support for
CSMA/CD protocol, full duplex, flow control, and management
objects, but with a tenfold increase in theoretical throughput
over 100Mbps Fast Ethernet and a hundredfold increase over
10Mbps Ethernet. Since it is compatible with all 10Mbps and
100Mbps Ethernet environments, Gigabit Ethernet provides a
straightforward upgrade without wasting a company’s existing
investment in hardware, software, and trained personnel.
The increased speed and extra bandwidth offered by Gigabit
Ethernet is essential for coping with the network bottlenecks
that frequently develop as computers and their busses get faster
and more users use applications that generate more traffic.
Upgrading key components, such as your backbone and servers
to Gigabit Ethernet can greatly improve network response times
3
as well as significantly speed up the traffic between your
subnets.
Gigabit Ethernet supports video conferencing, complex imaging,
and similar data-intensive applications. Likewise, since data
transfers occur 10 times faster than Fast Ethernet, servers
outfitted with Gigabit Ethernet adapters are able to perform 10
times the number of operations in the same amount of time.
Switching Technology
Another key development pushing the limits of Ethernet
technology is in the field of switching technology. A switch
bridges Ethernet packets at the MAC address level of the
Ethernet protocol transmitting among connected Ethernet or fast
Ethernet LAN segments.
Switching is a cost-effective way of increasing the total network
capacity available to users on a local area network. A switch
increases capacity and decreases network loading by making it
possible for a local area network to be divided into different
segments which don’t compete with each other for network
transmission capacity, giving a decreased load on each segment.
The switch acts as a high-speed selective bridge between the
individual segments. The switch automatically forwards traffic
4
that needs to go from one segment to another without interfering
with any other segments. This allows the total network capacity
to be multiplied, while maintaining the same network cabling and
adapter cards.
Switching LAN technology is a marked improvement over the
previous generation of network bridges, which were
characterized by higher latencies. Routers have also been used
to segment local area networks, but the cost of a router and the
setup and maintenance required make routers relatively
impractical. Today’s switches are an ideal solution to most local
area network congestion problems.
Features
The 4-Port 10/100/1000Mbps Copper Gigabit Ethernet Switch
with External Power Supply was designed for easy installation
and high performance in an environment where traffic on the
network and the number of users increase continuously.
?? 410/100/1000Mbps Gigabit Ethernet ports
?? Auto-Negotiation and Auto-MDIX for each port
?? SupportsFull/Half duplex transfer mode for 10 and
100Mbps
?? SupportsFull duplex transfer mode for 1000Mbps
?? Wire speed reception and transmission
Otros manuales para TEG-S40TXE
1
Tabla de contenidos
Otros manuales de Cambiar de TRENDnet
TRENDnet
TRENDnet TEG-40080ES Manual de usuario
TRENDnet
TRENDnet TEG-S18TX Manual de usuario
TRENDnet
TRENDnet TPE-224WS - Web Smart PoE Switch Manual de usuario
TRENDnet
TRENDnet TE100-S50g Manual de usuario
TRENDnet
TRENDnet TPE-S88 - Web Smart PoE Switch Manual de usuario
TRENDnet
TRENDnet TK-207K - KVM Switch - USB Manual de usuario
TRENDnet
TRENDnet TK-204UK - DVI USB KVM Switch Manual de usuario
TRENDnet
TRENDnet TE100-S14 Manual de usuario
TRENDnet
TRENDnet TE100-S800i Manual de usuario
TRENDnet
TRENDnet TK-401R Manual
TRENDnet
TRENDnet TEG-2248WS - Gigabit Web Smart Switch Manual de usuario
TRENDnet
TRENDnet TE100-DX16E Manual de usuario
TRENDnet
TRENDnet TEG-S081Fi Manual de usuario
TRENDnet
TRENDnet TPE-117Gi Manual de usuario
TRENDnet
TRENDnet TK-401R Manual de usuario
TRENDnet
TRENDnet TK-210K Manual de usuario
TRENDnet
TRENDnet TEG-S5g - Gigabit GREENnet Switch Manual de usuario
TRENDnet
TRENDnet TK-205K - PS/2 KVM Switch Manual de usuario
TRENDnet
TRENDnet TPE-T80 Manual de usuario
TRENDnet
TRENDnet TK-209i Manual de usuario
