Transition Networks SM24TAT4XA Manual de usuario

Publication date: Nov, 2014

RevisionA1.1

24-Port Gigabit PoE+ Managed Switch

SM24TAT4XA

Installation and Getting Started Guide

Publication date: Nov, 2014

RevisionA1.1

ABOUT THIS GUIDE

PURPOSE This guide gives specific information on how to operate and

use the management functions of the switch.

AUDIENCE The guide is intended for use by network administrators who

are responsible for operating and maintaining network

equipment; consequently, it assumes a basic working

knowledge of general switch functions, the Internet Protocol

(IP), and Simple Network Management Protocol (SNMP).

CONVENTIONS The following conventions are used throughout this guide to

show information:

WARRANTY See the Customer Support/ Warranty booklet included with

the product.

A copy of the specific warranty terms applicable to your

Manufacture products and replacement parts can be obtained

from your Manufacture Sales and Service Office pr authorized

dealer.

NOTE:Emphasizes important information or calls your

attention to related features or instructions.

ARNING

Alerts you to a potential hazard that could cause

personal injury.

AUTION

Alerts you to a potential hazard that could cause loss

of data, or damage the system or equipment.

Publication date: Nov, 2014

RevisionA1.1

iii

COMPLIANCES AND

SAFETY STATEMENTS

FCC-CLASS A This equipment has been tested and found to comply with the

limits for a Class A computing device pursuant to Subpart J of

part 15 of FCC Rules, which are designed to provide reasonable

protection against such interference when operated in a

commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his

own expense.

You are cautioned that changes or modifications not expressly

approved by the party responsible for compliance could void

your authority to operate the equipment.

You may use unshielded twisted-pair (UTP) for RJ-45

connections - Category 3 or better for 10 Mbps connections,

Category 5 or better for 100 Mbps connections, Category 5, 5e,

or 6 for 1000 Mbps connections. For fiber optic connections, you

may use 50/125 or 62.5/125 micron multimode fiber or 9/125

micron single-mode fiber.

CE MARK

DECLARATION

OF CONFORMANCE

FOR EMI AND

SAFETY (EEC)

This equipment has been tested and found to comply with the

protection requirements of European Emission Standard

EN55022/EN61000-3 and the Generic European Immunity

Standard EN55024.

EMC:

EN55022(2006)+A1:2007/CISPR Class A

Publication date: Nov, 2014

RevisionA1.1

22:2006+A1:2006 4K V CD, 8KV, AD

IEC61000-4-2 (2001) 3V/m

IEC61000-4-3( 2002) 1KV – (power line), 0.5KV – (signal line)

IEC61000-4-4(2004) Line to Line: 1KV, Line to Earth: 2KV

IEC61000-4-5 (2001) 130dBuV(3V) Level 2

IEC61000-4-6 (2003) 1A/m

IEC61000-4-8 (2001) Voltage dips:

>95%, 0.5period, 30%, 25periods

IEC61000-4-11(2001) Voltage interruptions:

>95%, 250periods

PUBLICATIONS

The following publication gives specific information on how to

operate and use the management functions of the switch:

The User’s Manual

Date Revision

5/30/2013 A1

11/19/2014 A1.1

Publication date: Nov, 2014

RevisionA1.1

Contents

ABOUT THIS GUIDE........................................................................................................ii

COMPLIANCES AND SAFETY STATEMENTS......................................................iii

INTRODUCTION................................................................................................................1

OVERVIEW.................................................................................................................................... 1

DESCRIPTION OF HARDWARE.................................................................................4

NETWORK PLANNING ...................................................................................................7

INTRODUCTION TO SWITCHING..................................................................................... 7

APPLICATION EXAMPLES.................................................................................................... 7

INSTALLING THE SWITCH........................................................................................10

SELECTING A SITE................................................................................................................. 10

ETHERNET CABLING ............................................................................................................. 10

EQUIPMENT CHECKLIST......................................................................................................11

PACKAGE CONTENTS.............................................................................................................11

MOUNTING..................................................................................................................................11

CONNECTING TO A POWER SOURCE........................................................................... 14

CONNECTING TO THE CONSOLE PORT....................................................................... 14

Operation of Web-based Management.............................................................17

MAKING NETWORK CONNECTIONS....................................................................18

CONNECTING NETWORK DEVICES............................................................................... 18

TWISTED-PAIR DEVICES................................................................................................... 18

FIBER OPTIC SFP DEVICES............................................................................................... 22

CABLE LABELING AND CONNECTION RECORDS.......................................25

TROUBLESHOOTING ....................................................................................................26

Basic Troubleshooting Tips.............................................................................................. 26

POWER AND COOLING PROBLEMS......................................................................28

Installation ................................................................................................................................ 28

IN-BAND ACCESS.................................................................................................................... 28

Publication date: Nov, 2014

RevisionA1.1

CABLES.................................................................................................................................29

TWISTED-PAIR CABLE AND PIN ASSIGNMENTS ................................................. 29

STRAIGHT- THROUGH WIRING...................................................................................... 30

1000BASE-T PIN ASSIGNMENTS................................................................................... 31

CABLE TESTING FOR EXISTING CATEGORY 5 CABLE........................................ 31

FIBER STANDARDS................................................................................................................ 32

SPECIFICATIONS...........................................................................................................33

PHYSICAL CHARACTERISTICS........................................................................................ 33

SWITCH FEATURES.................................................................................................................. 2

MANAGEMENT FEATURES.................................................................................................... 2

STANDARDS................................................................................................................................. 2

COMPLIANCES.......................................................................................................................... 35

COMPLIANCES.................................................................................................................36

Publication date: Nov, 2014

RevisionA1.1

INTRODUCTION

OVERVIEW The SM24TAT4XA is an affordable managed switch that

provides a reliable infrastructure for your network. These

switches deliver more intelligent features to improve the

availability of your critical business applications, protect your

sensitive information, and optimize your network bandwidth to

deliver information and applications more effectively. Easy to

set up and use, it provides the ideal combination of

affordability and capabilities for entry level Networking

includes Small Business or enterprise application and helps you

create a more efficient, better-connected workforce.

The SM24TAT4XA is able to provide up to 24 ports of Gigabit

Ethernet connectivity as well as 4 ports of 10G Ethernet

connectivity. It provides ideal flexibility to design suitable

network infrastructure for business requirement. The switch

supports the advanced security management capabilities and

network features to support includes data, voice, security, and

wireless technologies. Besides, these switches are easy to

deploy and configure, providing stable and quality performance

network services your business needs.

Publication date: Nov, 2014

RevisionA1.1

Front of the Switch

Back of the Switches

Publication date: Nov, 2014

RevisionA1.1

SWITCH

ARCHITECTURE

The switch performs a wire-speed, non-blocking switching fabric.

This allows wire-speed transport of multiple packets at low

latency on all ports simultaneously. The switch also features

full-duplex capability on all ports, which effectively doubles the

bandwidth of each connection.

This switch uses store-and-forward technology to ensure

maximum data integrity. With this technology, the entire packet

must be received into a buffer and checked for validity before

being forwarded. This prevents errors from being propagated

throughout the network.

NETWORK

MANAGEMENT

OPTIONS

The switch can also be managed over the network with a web

browser or Telnet application. The switch includes a built-in

network management agent that allows it to be managed

in-band using SNMP or RMON (Groups 1, 2, 3, 9) protocols. It

also has an RS-232 console port connector on the front panel for

out-of-band management. A PC may be connected to this port

for configuration and monitoring out-of-band via a null-modem

serial cable. (See Appendix B for wiring options.)

NOTE:For a detailed description of the management features,

refer to the User’s manual.

Publication date: Nov, 2014

RevisionA1.1

DESCRIPTION OF

HARDWARE

1000BASE-T

PORTS

The switch has 24 10/100/1000BASE-T RJ-45 ports. All RJ-45

ports support automatic MDI/MDI-X operation, auto-negotiation

and IEEE 802.3x auto-negotiation of flow control, so the

optimum data rate and transmission can be selected

automatically.

SFP

TRANSCEIVER

SLOTS

SM24TAT4XA supports 1G/10G dual speed SFP+ slots on port

25 to 28.

Please visit our web page below for the detail of the available SFP+/SFP modules:

http://www.transition.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Transition Networks

Transition Networks

Transition Networks SM12DP2XA Manual de usuario

Transition Networks

Transition Networks HB-E-TX-8 Manual de usuario

Transition Networks

Transition Networks SISTP1040-342-LRT Manual de usuario

Transition Networks

Transition Networks E-TBT-HB-0403 Manual de usuario

Transition Networks

Transition Networks SISTM1040-262D-LRT-B Instrucciones de funcionamiento y mantenimiento

Transition Networks

Transition Networks SM8TAT2SA Manual de instrucciones

Transition Networks

Transition Networks mil-sm8dpa Manual de usuario

Transition Networks

Transition Networks SM TAT4X Series Manual de usuario

Transition Networks

Transition Networks LAN MASTER 33022.B Manual de usuario

Transition Networks

Transition Networks SISPM1040-3 L Series Manual de usuario

Transition Networks

Transition Networks SISTM1040-262D-LRT Manual de usuario

Transition Networks

Transition Networks SM TAT4X Series Manual de usuario

Transition Networks

Transition Networks SISPM1040-3 L Series Manual de usuario

Transition Networks

Transition Networks SISTG1040-242-LRT Manual de usuario

Transition Networks

Transition Networks Milan MIL-SM2401MAF Manual de usuario

Transition Networks

Transition Networks SISTF10xx-130-LR(T) Manual de usuario

Transition Networks

Transition Networks SISPM1040-384-LRT-C Manual de usuario

Transition Networks

Transition Networks SISPM1040-3-L Series Manual de usuario

Transition Networks

Transition Networks SM8TAT2SA-DC Manual de usuario

Transition Networks

Transition Networks STACKMASTER TX12 Manual de usuario

Transition Networks

Transition Networks SISTP1040-382B-LRT Manual de usuario

Transition Networks

Transition Networks SISTM10xx-162-LR(T) Manual de usuario

Transition Networks

Transition Networks SM12DP2XA Manual de usuario

Transition Networks

Transition Networks SISGM1040-284-LRT Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario