Transition Networks SISTM1040-262D-LRT-B Instrucciones de funcionamiento y mantenimiento

Otros manuales de Cambiar de Transition Networks

Transition Networks

Transition Networks SM12DP2XA Manual de usuario

Transition Networks

Transition Networks SM8T2DPA Manual de usuario

Transition Networks

Transition Networks E-TBT-HB-0802 Manual de usuario

Transition Networks

Transition Networks SISPM1040-384-LRT-C Manual de usuario

Transition Networks

Transition Networks SISPM1040-582-LRT Manual de usuario

Transition Networks

Transition Networks SISPM1040-582-LRT Manual de usuario

Transition Networks

Transition Networks SESPM1040-541-LT Series Manual de usuario

Transition Networks

Transition Networks SISGM1040-184D-LRT Manual de usuario

Transition Networks

Transition Networks SM24-100SFP-AH Manual de usuario

Transition Networks

Transition Networks SM16TAT2SA Manual de usuario

Transition Networks

Transition Networks SM12DP2XA-NA Manual de usuario

Transition Networks

Transition Networks MIL-SEM24T4GPA Manual de usuario

Transition Networks

Transition Networks SISPM1040-3-L Series Manual de usuario

Transition Networks

Transition Networks SISPM1040-3 L Series Manual de usuario

Transition Networks

Transition Networks PSV-2/14-45 Manual de usuario

Transition Networks

Transition Networks MIL-S2400S Manual de usuario

Transition Networks

Transition Networks LANMaster T8-FL Manual de usuario

Transition Networks

Transition Networks SISGM-CHAS L2 Manual de usuario

Transition Networks

Transition Networks E-TBT-HB-1002 Manual de usuario

Transition Networks

Transition Networks SISPM1040-582-LRT Manual de usuario

Transition Networks

Transition Networks LAN MASTER 33022.B Manual de usuario

Transition Networks

Transition Networks E-MUX-SA05 Manual de usuario

Transition Networks

Transition Networks mil-sm8dpa Manual de usuario

Transition Networks

Transition Networks E-TBT-HB-0403 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

SISTM1040-262D-LRT-B Quick Start Guide

Package Contents

•SISTM1040-262D-LRT-B Hardened 18 Port Switch

•Wall Mount Bracket

•Quick Start Guide

•Console DB-9 to RJ45 Cable

•6-Pin Terminal Block Power Connector

Redundant Power Inputs

The switch has two 12-48VDC power inputs, power input 1 and

power input 2. Positive and negative terminals are labeled V+ and

V- for each input. Note polarity on the chassis of the switch.

Suitable wire sizes to use for the power connection are

12~22AWG. 16AWG or 18AWG is preferred. Connect wires

between the + terminals on the power supply and the +terminals

on the switch terminal block. Do the same with the –terminals.

Maintain correct polarity. Ensure the screws are tight and the

wires secure.

Chassis Ground

There is a chassis ground screw that can be used to ground the

device enclosure. Only negative grounding should be used.

Device Configuration

The SISTM1040-262D-LRT-B switch can be controlled via a built-in web server which supports Internet

Explorer (IE 5.0 or above versions) and other Web browsers such as FireFox and Chrome. Note: By default,

IE5.0 or later version do not allow Java applets to open sockets. You must modify the browser setting

separately in order to enable Java applets for network ports.

Management via Web Browser

Default values:

IP Address: 192.168.1.77

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.1.254

1. Launch your Web browser.

2. Type http://192.168.1.77 into the address bar

and press Enter. The login screen displays.

3. Type in Username: root Password: root.

4. Click Enter or OK button.

The main management page displays.

Basic Settings/IP Settings – Set IP Address:

You can enable DHCP by checking the box to

automatically obtain an IP address, or manually enter

static IP address information. Click Apply and the new

values will be applied and displayed.

Reset to Factory Defaults

On the front of the device, under the console port is a

hole to access the reset button. Use a paper clip to

press and hold the reset button for 5 seconds. The

LEDs on the switch will flash and the setting will be

returned to factory defaults.

For more information contact Transition Networks at:

800.526-9267 or visit us online: www.transition.com.