Transition Networks SISTG1040-242-LRT Manual de usuario

Transition Networks SISTG1040-2x2-LRT Quick Start Guide

33734 Rev. A https://www.transition.com Page 1of 2

SISTG1040-2x2-LRT Quick Start Guide

Introduction

Transition Networks’ SISTG1040-242-LRT and SISTG1040--282-LRT are Industrial Unmanaged GbE

Switches suitable for industrial Ethernet applications. See the SISTG1040-2x2-LRT Install Guide for

important Cautions, Warnings, Features, Specifications, Front & Back Panel, LEDs, RESET button,

Installation, Package Contents, and Troubleshooting, Warranty, Support & Compliance information.

Unpack and Install

1. Check package contents: verify that you have received the Switch, Quick Start Guide, Terminal Block, and Mounting

kit. Two optional Power Supply models are available (sold separately).

2. Unpack the contents in install location, and continue with Desktop, DIN Rail, or Wall mounting; see the Install Guide.

3. Review the front panel description the Install Guide. Use the front panel grounding screw as required; see chapter 3

of the Install Guide.

4. Install SFP modules. Refer to the specific SFP manual for cautions and warnings. Note: The SFP ports should use UL

Listed Optional Transceiver product, Rated 3.3Vdc, Laser Class 1.

5. Connect to Network / Devices: the switches provide eight or four 10M/100M/1G RJ45 ports. Use Cat 5e or better

unshielded twisted pair (UTP) cable terminated with an RJ-45 connector.

6. Connect to 12-48V DC Power. Caution: Before applying power from an AC outlet, insert terminal connectors into the

SISTG1040-2x2-LRT switch and verify all connections. Plugging in power connection after energizing power supply(s)

may damage the switch. a) Connect the wires between the +P1 and –P1 terminals on the switch terminal block and

the +V and -V terminals on the power supply. Optionally, connect the wires between the +P2 and –P2 terminals on

the switch terminal block and the +V and -V terminals on the power supply if redundant power is to be used.

b) Use a small Phillips screwdriver to tighten the wire-clamp screws. c) Connect the three wires (e.g., green, black,

white) of the power cord to the Ground ( ), N, and L clamp connections respectively. Use a small Phillips

screwdriver to tighten the wire-clamp screws. d) Connect the plug end of the power cord into a live AC outlet.

e) Verify that the Power Supply front panel DC OK LED is lit. See the Install Guide for more details.

7. Check the SYS LED. If it is lit, the power connection is correct. If not, see the Install Guide.

LED Descriptions

: three front panel LEDs allow switch status checking and monitoring:

•Power LEDs indicate if the switch is powered up correctly.

•System LED indicates if the system is ready.

•Port Status LEDs indicates the current status of each port. Check these LEDs to understand the port status.

RESET Button

Press the RESET button to reboot the switch. The front panel LEDs flash and the switch is reset.

Transition Networks SISTG1040-2x2-LRT Quick Start Guide

33734 Rev. A https://www.transition.com Page 2of 2

Front Panels

SISTG1040-242-LRT SISTG1040-282-LRT

LED Summary

LED Color Function

SYS (System) Green

On = the switch is ready.

Of = the switch is not ready.

P1 (Power 1) Green Input Power source 1 supplying power.

P2 (Power 2) Green Input Power source 2 supplying power.

Link/Act/Speed Green/

Amber

Light off: port disconnected or link failed.

Green Light on: 1G Link Present, No Activity.

Amber Light on: 100M/10M Link Present, No Activity.

Green Blinking: 1G Activity. Port is sending or receiving data.

Amber Blinking: 100M/10M Activity. Port is sending or receiving data.

Link/Act/Speed Green/

Amber

LNK: Amber/Green (Two Color)

Light off: port disconnected or link failed

Amber Light on: link-up (100M)

Green Light on: link-up (1G)

Blinking: activity (receiving or transmitting data)

For Transition Networks Drivers, Firmware, etc. go to the Product Support webpage (logon required).

For Manuals, Application Notes, Brochures, Data Sheets, Specifications, etc. go to the Support Library (no logon required).

Transition Networks | 10900 Red Circle Drive | Minnetonka, MN 55343, U.S.A.

Technical Support: Technical support is available 24-hours a day. US and Canada: 1-800-260-1312;

International: 00-1-952-941-7600. | tel: +1.952.941.7600 | toll free: 1.800.526.9267 | fax: 952.941.2322

sales@transition.com | techsupport@transition.com | customerservice@transition.com

Otros manuales para SISTG1040-242-LRT

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Transition Networks

Transition Networks

Transition Networks SM24TAT4GPA Manual de usuario

Transition Networks

Transition Networks E-MUX-SA05 Manual de usuario

Transition Networks

Transition Networks SISTM1040-262D-LRT Manual de usuario

Transition Networks

Transition Networks SM TAT4X Series Manual de usuario

Transition Networks

Transition Networks SISPM1040-3 L Series Manual de usuario

Transition Networks

Transition Networks SISPM1040-3-L Series Manual de usuario

Transition Networks

Transition Networks SM24DPa Manual

Transition Networks

Transition Networks MIL-L100i Manual de usuario

Transition Networks

Transition Networks SM Series Manual de usuario

Transition Networks

Transition Networks SM12DP2XA Manual de usuario

Transition Networks

Transition Networks SISTG1040-242-LRT Manual de usuario

Transition Networks

Transition Networks STACKMASTER TX12 Manual de usuario

Transition Networks

Transition Networks MIL-S4800 Manual de usuario

Transition Networks

Transition Networks SM12DP2XA Manual de usuario

Transition Networks

Transition Networks MIL-S2400S Manual de usuario

Transition Networks

Transition Networks SISPM1040-384-LRT-C Manual de usuario

Transition Networks

Transition Networks SM8T2DPA Manual de usuario

Transition Networks

Transition Networks SM24TBT2DPA Manual de usuario

Transition Networks

Transition Networks SM8TAT2SA Manual de usuario

Transition Networks

Transition Networks E-FX-HB-0800 Manual de usuario

Transition Networks

Transition Networks SISPM1040-3 L Series Manual de usuario

Transition Networks

Transition Networks mil-sm8dpa Manual de usuario

Transition Networks

Transition Networks SISTF101X-241-LRT Manual de usuario

Transition Networks

Transition Networks SM24T6DPA Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario