Texas Instruments ADC121S101EVM Manual de usuario

ADC121S101EVM User's Guide

User's Guide

Literature Number: SNOU131

July 2014

Contents

1 ADC121S101 BoosterPack Components ................................................................................. 4

2 Software Installation............................................................................................................. 5

2.1 Graphical User Interface (GUI)............................................................................................. 5

2.2 Launchpad Firmware Upgrade............................................................................................. 6

2.3 Update USB Driver .......................................................................................................... 7

3 ADC121S101 BoosterPack Setup and Operation .................................................................... 10

3.1 Connections................................................................................................................. 10

3.2 Launching the Software ................................................................................................... 10

4 Board Layout..................................................................................................................... 14

5 Schematic ......................................................................................................................... 19

6 Bill Of Materials.................................................................................................................. 20

2Contents SNOU131–July 2014

Submit Documentation Feedback

www.ti.com

List of Figures

1-1. ADC121S101EVM Evaluation Board...................................................................................... 4

2-1. ADC12xS10x Installation Directory........................................................................................ 5

2-2. ADC12xS10x Installation Finish ........................................................................................... 6

2-3. USB Firmware Upgrade Window .......................................................................................... 7

2-4. Driver Not Installed .......................................................................................................... 8

2-5. Driver Authentication Warning ............................................................................................. 9

2-6. Driver Installed ............................................................................................................... 9

3-1. ADC121S101EVM Attached to MSP430................................................................................ 10

3-2. Part Select................................................................................................................... 11

3-3. Selectable Fields in GUI................................................................................................... 12

3-4. Testing the Part............................................................................................................. 13

4-1. Top Assembly Layer....................................................................................................... 14

4-2. Top Layer Routing ......................................................................................................... 15

4-3. Power Layer Routing ...................................................................................................... 16

4-4. Ground Layer Routing ..................................................................................................... 17

4-5. Bottom Layer Routing...................................................................................................... 18

5-1. ADC121S101EVM Schematic............................................................................................ 19

List of Tables

1-1. Device and Package Configurations ...................................................................................... 4

6-1. ADC121S101 Bill of Materials............................................................................................ 20

SNOU131–July 2014 List of Figures

Chapter 1

SNOU131–July 2014

ADC121S101 BoosterPack Components

Figure 1-1. ADC121S101EVM Evaluation Board

Table 1-1. Device and Package Configurations

DEVICE IC PACKAGE

U1 LM4120IM5-3.3 SOT-23

U2 ADC121S101CIMF SOT-23

U3 LMT84DCK SC70

U4 LMV612MA SOIC-8

4ADC121S101 BoosterPack Components SNOU131–July 2014

Submit Documentation Feedback

Chapter 2

SNOU131–July 2014

Software Installation

2.1 Graphical User Interface (GUI)

To use the ADC121S101EVM, install the ADC12xS10x software:

1. If the ADC121S101EVM came from an FAE, the software GUI is in a .zip file. Otherwise, click on

http://www.ti.com/product/adc121s101, scroll down to the Software section, and download the latest

evaluation software.

2. Unzip the downloaded file into a known directory, and run the setup.exe file located in [Unzip

location]\ADC12xS10x\EVM_GUI\ADC12xS10x_Installer_v11.zip\ADC12xS10x_Installer

\Installer\Volume. Follow the pop-screen instructions by clicking the Next button to install the software.

Figure 2-1. ADC12xS10x Installation Directory

3. When the installation is finished, click the Finish button.

SNOU131–July 2014 Software Installation

Launchpad Firmware Upgrade

www.ti.com

Figure 2-2. ADC12xS10x Installation Finish

2.2 Launchpad Firmware Upgrade

This section is only necessary with a brand new Launchpad. If a Launchpad is shipped with an

ADC121S101EVM, skip this section.

MSP430 Firmware Upgrade Application Installation:

1. Navigate to http://www.ti.com/tool/msp430usbdevpack and click on Get Software.

2. Scroll down to the end of the page to find the USB Collateral Installers section.

3. Click on MSP430_USB_Firmware_Upgrade_Example-x-x-x-Setup.exe to download the tool; the page

redirects to a submission form.

4. Complete the information requested and submit the form; if approved, a download button appears.

5. Run the installation file and follow the on-screen instructions until completion. When asked about the

setup type, select Application Only. Click Finish when done.

Firmware upgrade:

1. If the ADC121S101EVM is from an FAE, the firmware is the text file adc12xs10x_fw-v0.92.txt.

2. Open the MSP430 USB Firmware Upgrade application. By default, the application is launched from

Start > Programs > Texas Instruments > MSP430 USB Firmware Upgrade Example.

3. Click Next to proceed on the first prompt; read and accept the license agreement and click Next to

continue.

6Software Installation SNOU131–July 2014

Submit Documentation Feedback

www.ti.com

Update USB Driver

Figure 2-3. USB Firmware Upgrade Window

4. Enable the Select Firmware button and browse to open the downloaded firmware adc12xs10x_fw-

v0.92.txt.

5. Press the BSL button on the MSP430 LaunchPad and connect to the PC with a USB cable; if detected,

the text on the Firmware Upgrade tool changes from No device connected to Found 1 device.

6. Click on the Upgrade Firmware button to program the LaunchPad. Close the application when done.

2.3 Update USB Driver

1. Before launching the ADC12xS10x software, connect the ADC121S101EVM board to a USB port of

the PC. Go to the Device Manager and find MSP43-USB Example. Right click and select Update

Driver Software.

SNOU131–July 2014 Software Installation

Update USB Driver

www.ti.com

Figure 2-4. Driver Not Installed

2. On the next screen, select the Browse my computer for driver software option and go to the directory

of the install files. Select the MSP430_CDC_PID0x094e_ADC_DAC_EVMs.inf file.

3. If prompted with a warning window, select Install this Driver Anyway. Close the installation window

when done. The device manager now displays a TI_ADC_DAC_EVMs item followed by a COM port

number.

8Software Installation SNOU131–July 2014

Submit Documentation Feedback

www.ti.com

Update USB Driver

Figure 2-5. Driver Authentication Warning

Figure 2-6. Driver Installed

SNOU131–July 2014 Software Installation

Chapter 3

SNOU131–July 2014

ADC121S101 BoosterPack Setup and Operation

3.1 Connections

1. Attach the ADC121S101EVM BoosterPack onto the MSP430 LaunchPad using connectors JA, JB, JC,

JD. Align the Launchpad and ADC121S101EVM so that the text “LaunchPad” and “2013 TI” are in the

same direction.

Figure 3-1. ADC121S101EVM Attached to MSP430

2. Connect the USB cable from the LaunchPad to the PC.

3.2 Launching the Software

1. The ADC12xS10x GUI software runs by clicking on Start > All Program > ADC12xS10x. After running

the GUI, select ADC121S101.

10 ADC121S101 BoosterPack Setup and Operation SNOU131–July 2014

Submit Documentation Feedback

Tabla de contenidos

Otros manuales de Placa madre de Texas Instruments

Texas Instruments

Texas Instruments DEM-OPA-SC-1A-EVM Manual de usuario

Texas Instruments

Texas Instruments AM64x Manual de usuario

Texas Instruments

Texas Instruments TPS7A10EVM-004 Manual de usuario

Texas Instruments

Texas Instruments TPS23882B1EVM Manual de usuario

Texas Instruments

Texas Instruments TPS65217 EVM Manual de usuario

Texas Instruments

Texas Instruments TPS563203 Manual de usuario

Texas Instruments

Texas Instruments LP8861-Q1 Manual de usuario

Texas Instruments

Texas Instruments LAUNCHXL-CC1352P-2 Guía de inicio rápido

Texas Instruments

Texas Instruments PCM182xEVM Manual de usuario

Texas Instruments

Texas Instruments TPA2037D1 Manual de usuario

Texas Instruments

Texas Instruments TRF3711xxEVM Series Manual de usuario

Texas Instruments

Texas Instruments ADC364xEVM Manual de usuario

Texas Instruments

Texas Instruments TMS320DM6437 Manual de usuario

Texas Instruments

Texas Instruments Stellaris LM3S9D90 Manual de usuario

Texas Instruments

Texas Instruments bq34110EVM-796 Manual de usuario

Texas Instruments

Texas Instruments TPS54373EVM-237 Manual de usuario

Texas Instruments

Texas Instruments ADS8920BEVM-PDK Manual de usuario

Texas Instruments

Texas Instruments INA1620EVM Manual de usuario

Texas Instruments

Texas Instruments DLP LightCrafter DLPC910 Manual de usuario

Texas Instruments

Texas Instruments ADS5292 Manual de usuario

Texas Instruments

Texas Instruments TPS650320-Q1 Manual de usuario

Texas Instruments

Texas Instruments mmWaveICBoost Manual de usuario

Texas Instruments

Texas Instruments TPSM82830 AEVM Series Manual de usuario

Texas Instruments

Texas Instruments CC1101 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario