Texas Instruments TLC6C5716-Q1 Manual de usuario

SLVUBD7–May 2018

TLC6C5716-Q1 Evaluation Module

ADVANCE INFORMATION

User's Guide

SLVUBD7–May 2018

TLC6C5716-Q1 Evaluation Module

This document is a guide for using the TLC6C5716-Q1 EVM and GUI. The TLC6C5716EVM is designed

to be controlled with the TLC65716EVM GUI via a USB2ANY communication tool. The TLC6C5716EVM

can be powered by a micro-USB supply with a PC USB port. The TLC6C5716EVM GUI is designed to

demonstrate the TLC6C5716-Q1 features.

Contents

1 Introduction ................................................................................................................... 1

2 Test Setup and Results..................................................................................................... 3

3 Board Layout ................................................................................................................. 7

4 Schematic and Bill of Materials ............................................................................................ 8

List of Figures

1 TLC6C5716EVM Kit ........................................................................................................ 2

2 TLC6C5724-Q1EVM Hardware Setup.................................................................................... 3

3 TLC6C5716EVM GUI Landing Page...................................................................................... 4

4 Connection Status........................................................................................................... 5

5 Advanced Settings Page.................................................................................................... 6

6 PCB Layout................................................................................................................... 7

7 TLC6C5716EVM Schematic ............................................................................................... 8

List of Tables

1 Bill of Materials............................................................................................................... 9

Trademarks

All trademarks are the property of their respective owners.

1 Introduction

The TLC6C5716-Q1 device is a 16-channel, constant-current LED driver designed to support automotive

LED applications.

1.1 Features

The EVM has the following features:

• 16 constant-current-sink output channels

• Excellent constant-current accuracy

• 7-bit individual dot correction

• 8-bit global brightness control

• 12-bit PWM dimming

• LED protection and diagnostics

Introduction

www.ti.com

2SLVUBD7–May 2018

Submit Documentation Feedback

TLC6C5716-Q1 Evaluation Module

ADVANCE INFORMATION

1.2 Applications

This EVM can be used in the following applications:

• Automotive cluster indicator

• Automotive HVAC panel

• Automotive E-shifter indicator

• Automotive local dimming display

• Automotive ambient lighting

1.3 Description

1.3.1 Kit Contents

The TLC6C5716EVM kit contains a USB2ANY, TLC6C5716EVM, and two connection cables, as Figure 1

shows.

Figure 1. TLC6C5716EVM Kit

1.3.2 Additional Items Required

The following additional items are required to run the TLC6C5716EVM:

• PC with the TLC6C5716EVM GUI installed

• 5-V DC supply or USB port for LED supply

USB2ANY

TLC6C5716EVM

xxx

DCSupply

Vsense

Vcc

GND

USB cable

Ribbon Cable

P ut Shu nt o n J38 to supp l y Vcc

f rom US B2AN Y

www.ti.com

Test Setup and Results

SLVUBD7–May 2018

TLC6C5716-Q1 Evaluation Module

ADVANCE INFORMATION

2 Test Setup and Results

2.1 Hardware Setup

Figure 2 shows the hardware setup of the TLC6C5716-Q1 EVM.

• Connect the 5-V power supply to the LED board between TP1 (SENSE) and TP3 (GND), use the 5-V

micro-USB supply connected to J36 to supply the LED.

• Put a shunt on J53 to connect the USB2ANY 3.3-V supply to VCC. In this case, extra DC supply is not

needed to supply the VCC.

• Connect the host computer to the USB2ANY board via a USB cable.

• Connect the ribbon cable between the USB2ANY board and the TLC6C5716-Q1 EVM board.

Figure 2. TLC6C5724-Q1EVM Hardware Setup

Test Setup and Results

www.ti.com

4SLVUBD7–May 2018

Submit Documentation Feedback

TLC6C5716-Q1 Evaluation Module

ADVANCE INFORMATION

2.2 Software Installation

Download the GUI software from the TLC6C5716-Q1 EVM tool folder and install on the PC. Once

installed, a shortcut to the GUI is found on the desktop and also in the start-up menu under the Texas

Instruments folder. Figure 3 shows the landing page of the TLC6C5716EVM GUI. A support document link

is on bottom of the landing page.

Figure 3. TLC6C5716EVM GUI Landing Page

www.ti.com

Test Setup and Results

SLVUBD7–May 2018

TLC6C5716-Q1 Evaluation Module

ADVANCE INFORMATION

2.3 GUI Function

This section provides instructions to run the TLC6C5716EVM using the TLC6C5716EVM GUI.

2.3.1 Connection Status

The TLC6C5716EVM connection status appears on the GUI landing page. A red status indicator means

Device Not connected, a green status indicator means Device connected. Click the Go Advanced button

and a quick configuration page opens for control of the TLC6C5716EVM.

Figure 4. Connection Status

Test Setup and Results

www.ti.com

6SLVUBD7–May 2018

Submit Documentation Feedback

TLC6C5716-Q1 Evaluation Module

ADVANCE INFORMATION

2.3.2 Advanced Settings Page

The Advanced Settings page (Figure 5) provides more register configuration features. The GLOBAL

RESET button resets the TLC6C5716-Q1 internal registers, meaning all registers values are set to 0,

except the Mask LED Error bit is set to 1. The INITIALIZE ALL CH VALUES buttons turns on all channels

with 50% grayscale (GS), dot correction, and brightness control values. GS and dot correction channels

can be adjusted separately.

For APS TEST and LOD TEST, turn off all output channels first, then perform the test. For other

configurations, refer to TLC6C5716-Q1 16-Channel, Full Diagnostics, Constant-Current LED Driver With

7-Bit Dot Correction and 12-Bit PWM Dimming for details.

Figure 5. Advanced Settings Page

2.3.3 Device Cascading

Use J34 and J35 to connect two TLC6C5716-Q1 EVMs in cascading mode. Note that users should

remove J34 shunt during the cascading mode.

www.ti.com

Board Layout

SLVUBD7–May 2018

TLC6C5716-Q1 Evaluation Module

ADVANCE INFORMATION

3 Board Layout

Figure 6 illustrates the PCB layout of TLC6C5716EVM.

Figure 6. PCB Layout

SENSE

ERR

GND

0 R4

4.7µF

IREF

OUTR0

OUTB0

OUTR1

OUTR2

OUTR3

OUTR4

OUTR5

OUTR7

OUTB1

OUTB2

OUTB3

OUTB4

OUTB5

OUTB7

BLANK

GCLK

LATCH

SCK_IN

SDO

SDI_IN

GND

GNDSENSE VCC

ERR

LATCH

GNDVCC 3.3V

SENSE

GND

Headers

SDO SDO_OUT

Single Device

GND

4.7µF

0.1µF

Red

1 2

D17

1.0k

3.3k

VCC

J39

GND

GCLK

SCK_IN

SDO_OUT

GND

J17

J18

J19

J20

J30

J29

J28

J27

J26

J25

J21

J22

J23

J24

J31

J32

SENSE

GND

J1 J2 J3 J4 J7 J8 J9 J10 J11 J12 J13 J14 J15 J16J5 J6

TP28 TP29

TP15TP14TP4 TP5

TP16 TP17 TP18 TP19 TP20 TP21 TP22

TP8 TP9 TP10 TP11 TP12 TP13

TP23 TP24 TP25 TP26 TP27

SDI_IN SCK_IN

LATCHGCLKOUTR0 OUTB0 OUTR2 OUTB2 OUTR3 OUTB3 OUTR4 OUTB4

OUTR5 OUTB5 OUTR6 OUTB6 OUTR7 OUTB7 VCC IREF ERR GND BLANK SDO

TP30

SENSE

TP6

OUTR1

TP7

OUTB1

Signal Output

1 2

3 4

5 6

7 8

9 10

J35

GND

Signal Input

1 2

3 4

5 6

7 8

9 10

J34

GND

Cascade Mode

3.3V 3.3V

J33

J38

1 2

3 4

5 6

7 8

9 10

11 12

13 14

J37 1

MP1

MP2

MP3

MP4

MP5

MP6

J36

TP1 TP2 TP3

4.7uF

DNP

BLANK

GCLK

LATCH

SCK_IN

SDI_IN SDO

BLANK

GCLK

LATCH

SCK_IN

4.7µF

SDI_IN

BLANK

2.43k

SENSE

OUTB6

OUTR6

White

Super Red

White

D10

Super Red

White

Super Red

D14

True Green

D15

Blue

D16

True Green

D11

True Green

D12

White

Super Red

D13

SCK

SDI

LATCH

SDO

ERR

SENSE 38

BLANK

VCC

GND 33

PAD 39

GCLK

NU 7

NU 10

NU 13

NU 16

NU 23

NU 26

NU 29

NU 32

OUTR0 8

OUTR1 11

OUTR2 14

OUTR3 17

OUTR4 22

OUTR5 25

OUTR6 28

OUTR7 31

OUTB0 9

OUTB1 12

OUTB2 15

OUTB3 18

OUTB4 21

OUTB5 24

OUTB6 27

OUTB7 30

IREF

TLC6C5716QDAPRQ1

Schematic and Bill of Materials

www.ti.com

8SLVUBD7–May 2018

Submit Documentation Feedback

TLC6C5716-Q1 Evaluation Module

ADVANCE INFORMATION

4 Schematic and Bill of Materials

4.1 Schematic

Figure 7 illustrates the TLC6C5716EVM schematic.

Figure 7. TLC6C5716EVM Schematic

www.ti.com

Schematic and Bill of Materials

SLVUBD7–May 2018

TLC6C5716-Q1 Evaluation Module

ADVANCE INFORMATION

4.2 Bill of Materials

Table 1 lists the TLC6C5716EVM BOM.

Table 1. Bill of Materials

Designator QTY Value Description Package Reference Part Number Manufacturer

C1 1 4.7uF CAP, CERM, 4.7 µF, 16 V, ±10%, X5R, 0805 0805 GRM21BR61C475KA88L Murata

C2 1 0.1uF CAP, CERM, 0.1 µF, 16 V, ±5%, X7R, 0603 0603 0603YC104JAT2A AVX

C3, C5, C6, C7 4 4.7uF CAP, CERM, 4.7 µF, 16 V,±10%, X5R, 0805 0805 EMK212BJ475KG-T Taiyo Yuden

D1, D2, D3, D4, D5, D6, D13, D14 8 Super Red LED, Super Red, SMD 2.8x3.2mm LS E67B-S2U1-1-1 OSRAM

D7, D8, D9, D10 4 White LED, White, SMD 2.8x3.2mm LW E6SG-AABA-JKPL-1 OSRAM

D11, D12, D15 3 True

Green LED, True Green, SMD 2.8x3.2mm LT E6SG-AABB-35-1 OSRAM

D16 1 Blue LED, Blue, SMD Power TOPLED LB-E6SG OSRAM

D17 1 Red LED, Red, SMD Red 0805 LED LTST-C170KRKT Lite-On

J1, J2, J3, J4, J5, J6, J7, J8, J9, J10,

J11, J12, J13, J14, J15, J16 16 Header, 100mil, 1pos, Gold, TH Testpoint TSW-101-07-G-S Samtec

J17, J18, J19, J20, J21, J22, J23, J24,

J25, J26, J27, J28, J29, J30, J31, J32 16 Header, 100mil, 3x1, Gold, TH 3x1 Header TSW-103-07-G-S Samtec

J33, J38, J39 3 Header, 100mil, 2x1, Gold, TH 2x1 Header TSW-102-07-G-S Samtec

J34, J35 2 Header (shrouded), 100mil, 5x2, Gold, TH TH, 10-Leads, Body 8.5x20mm, Pitch

2.54mm XG4C-1031 Omron Electronic

Components

J36 1 Receptacle, 0.65 mm, 5x1, Gold, R/A, SMT SMD, 5-Leads, Body 7.9x5.57mm,

Pitch 0.65mm 10118192-0001LF FCI

J37 1 Connector, 15x2, 3A 300V STRT DIP, TH Connector, 15x2, Pitch 2.54mm, TH XG4C-3031 Omron Electronic

Components

R1 1 1.0k RES, 1.0 k, 5%, 0.1 W, 0603 0603 CRCW06031K00JNEA Vishay-Dale

R2 1 3.3k RES, 3.3 k, 5%, 0.1 W, 0603 0603 CRCW06033K30JNEA Vishay-Dale

R3 1 2.43k RES, 2.43 k, 0.5%, 0.1 W, 0603 0603 RT0603DRE072K43L Yageo America

R4 1 0 RES, 0, 5%, 0.1 W, 0603 0603 ERJ-3GEY0R00V Panasonic

SH-J1, SH-J2, SH-J3, SH-J4, SH-J5,

SH-J6, SH-J7, SH-J8, SH-J9, SH-J10,

SH-J11, SH-J12, SH-J13, SH-J14, SH-

J15, SH-J16, SH-J17, SH-J18, SH-J19

19 Single Operation 2.54mm Pitch Open Top Jumper

Socket Single Operation 2.54mm Pitch Open

Top Jumper Socket M7582-05 Harwin

TP1, TP2, TP3 3 Terminal, Turret, TH, Double Keystone1502-2 1502-2 Keystone

TP4, TP5, TP6, TP7, TP8, TP9, TP10,

TP11, TP12, TP13, TP14, TP15, TP16,

TP17, TP18, TP19, TP20, TP21, TP22,

TP23, TP24, TP25, TP26, TP27, TP28,

TP29, TP30

27 Test Point, Miniature, White, TH White Miniature Testpoint 5002 Keystone

U1 1 Automotive Grade 16-Channel, Full Diagnostics,

Constant-Current LED Driver with 7-Bit Dot

Correction and 12-Bit PWM Dimming, DAP0038E

(TSSOP-38)

DAP0038E TLC6C5716QDAPRQ1 Texas Instruments

C4 0 4.7uF CAP, CERM, 4.7 µF, 16 V,±10%, X5R, 0805 0805 EMK212BJ475KG-T Taiyo Yuden

STANDARD TERMS FOR EVALUATION MODULES

1. Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or

documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance

with the terms set forth herein. User's acceptance of the EVM is expressly subject to the following terms.

1.1 EVMs are intended solely for product or software developers for use in a research and development setting to facilitate feasibility

evaluation, experimentation, or scientific analysis of TI semiconductors products. EVMs have no direct function and are not

finished products. EVMs shall not be directly or indirectly assembled as a part or subassembly in any finished product. For

clarification, any software or software tools provided with the EVM (“Software”) shall not be subject to the terms and conditions

set forth herein but rather shall be subject to the applicable terms that accompany such Software

1.2 EVMs are not intended for consumer or household use. EVMs may not be sold, sublicensed, leased, rented, loaned, assigned,

or otherwise distributed for commercial purposes by Users, in whole or in part, or used in any finished product or production

system.

2Limited Warranty and Related Remedies/Disclaimers:

2.1 These terms do not apply to Software. The warranty, if any, for Software is covered in the applicable Software License

Agreement.

2.2 TI warrants that the TI EVM will conform to TI's published specifications for ninety (90) days after the date TI delivers such EVM

to User. Notwithstanding the foregoing, TI shall not be liable for a nonconforming EVM if (a) the nonconformity was caused by

neglect, misuse or mistreatment by an entity other than TI, including improper installation or testing, or for any EVMs that have

been altered or modified in any way by an entity other than TI, (b) the nonconformity resulted from User's design, specifications

or instructions for such EVMs or improper system design, or (c) User has not paid on time. Testing and other quality control

techniques are used to the extent TI deems necessary. TI does not test all parameters of each EVM.

User's claims against TI under this Section 2 are void if User fails to notify TI of any apparent defects in the EVMs within ten (10)

business days after delivery, or of any hidden defects with ten (10) business days after the defect has been detected.

2.3 TI's sole liability shall be at its option to repair or replace EVMs that fail to conform to the warranty set forth above, or credit

User's account for such EVM. TI's liability under this warranty shall be limited to EVMs that are returned during the warranty

period to the address designated by TI and that are determined by TI not to conform to such warranty. If TI elects to repair or

replace such EVM, TI shall have a reasonable time to repair such EVM or provide replacements. Repaired EVMs shall be

warranted for the remainder of the original warranty period. Replaced EVMs shall be warranted for a new full ninety (90) day

warranty period.

3Regulatory Notices:

3.1 United States

3.1.1 Notice applicable to EVMs not FCC-Approved:

FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software

associated with the kit to determine whether to incorporate such items in a finished product and software developers to write

software applications for use with the end product. This kit is not a finished product and when assembled may not be resold or

otherwise marketed unless all required FCC equipment authorizations are first obtained. Operation is subject to the condition

that this product not cause harmful interference to licensed radio stations and that this product accept harmful interference.

Unless the assembled kit is designed to operate under part 15, part 18 or part 95 of this chapter, the operator of the kit must

operate under the authority of an FCC license holder or must secure an experimental authorization under part 5 of this chapter.

3.1.2 For EVMs annotated as FCC – FEDERAL COMMUNICATIONS COMMISSION Part 15 Compliant:

CAUTION

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to

operate the equipment.

FCC Interference Statement for Class A EVM devices

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

Tabla de contenidos

Otros manuales de Placa madre de Texas Instruments

Texas Instruments

Texas Instruments TRF3722EVM Manual de usuario

Texas Instruments

Texas Instruments TPS54380EVM-001 Manual de usuario

Texas Instruments

Texas Instruments TPA3245 Manual de usuario

Texas Instruments

Texas Instruments J721E Manual de usuario

Texas Instruments

Texas Instruments AFE8201EVM Manual de usuario

Texas Instruments

Texas Instruments bq24072RGTR Manual de usuario

Texas Instruments

Texas Instruments Variscite VAR-SOM-AM62 Manual de usuario

Texas Instruments

Texas Instruments TPS3840EVM Manual de usuario

Texas Instruments

Texas Instruments AN-2166 LMZ10501 Manual de usuario

Texas Instruments

Texas Instruments BQ27411EVM-G1C Manual de usuario

Texas Instruments

Texas Instruments bq24190 Manual de usuario

Texas Instruments

Texas Instruments TLC5944EVM-358 Manual de usuario

Texas Instruments

Texas Instruments TPS55065EVM Manual de usuario

Texas Instruments

Texas Instruments ADS54J40EVM Manual de usuario

Texas Instruments

Texas Instruments DS90UB954-Q1EVM Manual de usuario

Texas Instruments

Texas Instruments ADC08D1520RB Manual de usuario

Texas Instruments

Texas Instruments AFE3010EVM Manual de usuario

Texas Instruments

Texas Instruments LM63635DNEVM Manual de usuario

Texas Instruments

Texas Instruments DLP NIRscan Manual de usuario

Texas Instruments

Texas Instruments TAS5806MDEVM Manual de usuario

Texas Instruments

Texas Instruments EK-LM4F232 Manual de usuario

Texas Instruments

Texas Instruments TPS563300EVM-226 Manual de usuario

Texas Instruments

Texas Instruments LAUNCHXL-F280025C Guía del administrador

Texas Instruments

Texas Instruments TPS7B4255EVM-062 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario