Teledyne Lecroy AP015 Manual de usuario

Distributor of Teledyne LeCroy: Excellent Integrated System Limited

Datasheet of CP015-CF01 - HIGH SPEED CURRENT SHUNT CP015

Excellent Integrated System Limited

Stocking Distributor

Click to view price, real time Inventory, Delivery & Lifecycle Information:

Teledyne LeCroy

CP015-CF01

For any questions, you can email us directly:

[email protected]

1 / 25

Distributor of Teledyne LeCroy: Excellent Integrated System Limited

Datasheet of CP015-CF01 - HIGH SPEED CURRENT SHUNT CP015

Operator’s

Manual

AP015

Current Probe

2 / 25

Distributor of Teledyne LeCroy: Excellent Integrated System Limited

Datasheet of CP015-CF01 - HIGH SPEED CURRENT SHUNT CP015

3 / 25

Distributor of Teledyne LeCroy: Excellent Integrated System Limited

Datasheet of CP015-CF01 - HIGH SPEED CURRENT SHUNT CP015

iii

AP015 Current Probe

Operator’s Manual

October 2013

4 / 25

Distributor of Teledyne LeCroy: Excellent Integrated System Limited

Datasheet of CP015-CF01 - HIGH SPEED CURRENT SHUNT CP015

700 Chestnut Ridge Road

Chestnut Ridge, NY, 10977-6499

Tel: (845) 425-2000

Fax: (845) 578 5985

teledynelecroy.com

Unauthorized duplication of Teledyne LeCroy documentation materials other than for internal

sales and distribution purposes is strictly prohibited. However, clients are encouraged to distribute

and duplicate Teledyne LeCroy documentation for their own internal educational purposes.

Teledyne LeCroy is a registered trademark of Teledyne LeCroy, Inc. Windows is a registered

trademark of Microsoft Corporation. Other product or brand names are trademarks or requested

trademarks of their respective holders. Information in this publication supersedes all earlier

versions. Specifications are subject to change without notice.

Warranty

Teledyne LeCroy warrants this oscilloscope accessory for normal use and operation within

specification for a period of one year from the date of shipment. Spare parts, replacement parts

and repairs are warranted for 90 days.

In exercising its warranty, Teledyne LeCroy, at its option, will either repair or replace any assembly

returned within its warranty period to the Customer Service Department or an authorized service

center. However, this will be done only if the product is determined by Teledyne LeCroy’s

examination to be defective due to workmanship or materials, and the defect is not caused by

misuse, neglect, accident, abnormal conditions of operation, or damage resulting from attempted

repair or modifications by a non-authorized service facility.

The customer will be responsible for the transportation and insurance charges for the return of

products to the service facility. Teledyne LeCroy will return all products under warranty with

transportation charges prepaid.

This warranty replaces all other warranties, expressed or implied, including but not limited to any

implied warranty of merchantability, fitness or adequacy for any particular purposes or use.

Teledyne LeCroy shall not be liable for any special, incidental, or consequential damages, whether

in contract or otherwise.

922254-00 Rev A

October 2013

5 / 25

Distributor of Teledyne LeCroy: Excellent Integrated System Limited

Datasheet of CP015-CF01 - HIGH SPEED CURRENT SHUNT CP015

Operator’s Manual

922254-00 Rev A 1

Safety Instructions

This section contains instructions that must be observed to keep this

oscilloscope accessory operating in a correct and safe condition. You are

required to follow generally accepted safety procedures in addition to the

precautions specified in this section. The overall safety of any system

incorporating this accessory is the responsibility of the assembler of

the system.

Symbols

These symbols may appear on the probe body or in this manual to alert you to

important safety considerations.

WARNING. High Voltage, risk of electric shock.

CAUTION. Potential for damage to probe or instrument it is connected

to. Attend to the accompanying information to protect against

personal injury or damage. Do not proceed until conditions are fully

understood and met.

ELECTROSTATIC DISCHARGE (ESD) HAZARD. The probe is susceptible

to damage if anti-static measures are not taken.

DOUBLE INSULATION

PROTECTIVE (EARTH) TERMINAL

Precautions

To avoid personal injury or damage to property, review and comply with the

following safety precautions.

Use product only as specified. Use of the probe is restricted to insulated

conductors or limited energy circuit conductors.

Connect and disconnect properly. Connect probe to the measurement

instrument before making any connections to a voltage/current source.

6 / 25

Distributor of Teledyne LeCroy: Excellent Integrated System Limited

Datasheet of CP015-CF01 - HIGH SPEED CURRENT SHUNT CP015

ADP015 Current Probe

2 922254-00 Rev A

Observe all terminal ratings. To avoid electric shock or fire, do not use the

probe above the current & voltage limits shown on the probe as well as all

accessories.

Do not remove probe casing. Removing the probe’s case or touching exposed

connections may result in electric shock.

Use indoors only.

Use only within operational environment listed. Do not use in wet or explosive

atmospheres.

Keep product surfaces clean and dry. Clean with a cloth moistened in water or

alcohol. Do not submerge instrument. Do not use harsh or abrasive cleansers.

Do not operate with suspected failures. Do not use the probe if any part is

damaged. Cease operation immediately and sequester the probe from

inadvertent use.

WARNING. To avoid risk of electric shock, keep your fingers behind

the finger guard when locking and unlocking the probe slider. Keep

the probe cable away from the circuits being measured. Use only the

specified accessories.

WARNING. The probe is classified as a Type D current sensor per

EN61010-032 safety standard. Use of the probe is restricted to

insulated conductors or limited energy circuit conductors. Any use of

the probe in a manner not specified by the manufacturer may impair

the probe’s safety protection.

Operating Environment

The accessory is intended for indoor use and should be operated in a clean, dry

environment. Before using this product, ensure that its operating environment is

maintained within these parameters:

Temperature: 0 to 40 °C

Humidity: 80% maximum up to 31 °C

Altitude: 2000 m maximum

7 / 25

Distributor of Teledyne LeCroy: Excellent Integrated System Limited

Datasheet of CP015-CF01 - HIGH SPEED CURRENT SHUNT CP015

Operator’s Manual

922254-00 Rev A 3

Specifications

The following specifications are valid for model AP015 current probes after the

probe has reached operating temperature, which is 20 minutes with power

applied in a environment with stable ambient temperature. The probe must be

operating within the environmental conditions listed in the General

Characteristics section, and has been calibrated within the past 12 months in an

ambient temperature of 23 ±5 °C.

Nominal Characteristics

Nominal characteristics describe parameters and attributes which are

guaranteed by design, but do not have associated tolerances.

Interface: ProBus

Coupling: AC, GND, DC

Maximum Current: DC ±30 A (continuous)

±50 A maximum (< 10 s)

Sensitivity: 10 mA/div to 20 A/div

Offset Range: ±100 A maximum

Maximum Conductor Size: 5 mm

Maximum Voltage 300 V CAT I

(bare conductor): 150 V CAT II

Cable Length: 2 m

Weight (probe only): 300 g (10.6 oz.)

Warranted Electrical Characteristics

Warranted characteristics describe parameters which have guaranteed

performance. Unless otherwise noted, tests are provided in the Performance

Verification Procedure for all warranted specifications.

DC Accuracy: ±1% of reading to 15 A

(at 25 °C, after degauss)

±2% of reading to 30 A

(at 25 °C, after degauss)

Bandwidth: DC to 50 MHz

8 / 25

Distributor of Teledyne LeCroy: Excellent Integrated System Limited

Datasheet of CP015-CF01 - HIGH SPEED CURRENT SHUNT CP015

ADP015 Current Probe

4 922254-00 Rev A

Typical Electrical Characteristics

Typical characteristics describe parameters which do not have guaranteed

performance, however are representative of the average performance from a

sample of several probes. Tests for typical characteristics are not provided in the

Performance Verification Procedure.

Rise Time: < 7 ns

Slew Rate: > 1.6 A/ns (sensitivity ≥ 1 A/div)

Insertion Impedance: < 0.06 Ω at 5 MHz

Performance Verification

This procedure can be used to verify the warranted characteristics of the AP015

Current Probe.

The recommended calibration interval for the model AP015 Current Probe is one

year. The complete performance verification procedure should be performed as

the first step of annual calibration. Performance verification can be completed

without removing the instrument covers or exposing the user to hazardous

voltages. Test results can be recorded on a photocopy of the Test Record

provided at the end of this manual.

Adjustment should only be attempted if a parameter measured in the

Performance Verification Procedure is outside of the specification limits.

Adjustment should only be performed by qualified personnel.

Required Equipment

The following table lists the test equipment and accessories, or their equivalents,

that are required for performance verification of the AP015 Current Probe.

Because the input and output connector types may vary on different brands and

models of test instruments, additional adapters or cables may be required.

9 / 25

Distributor of Teledyne LeCroy: Excellent Integrated System Limited

Datasheet of CP015-CF01 - HIGH SPEED CURRENT SHUNT CP015

Operator’s Manual

922254-00 Rev A 5

Table 1. List of Required Equipment

Description

Minimum Requirements

Test Equipment Examples

Wide Band oscilloscope

Minimum 200 MHz bandwidth

ProBus interface equipped

Software Version 7.6.0 or

greater

Teledyne LeCroy LT322

Teledyne LeCroy X-Stream

scope with AP-1M Hi-Z

adapter

Digital Multimeter

(2 required)

DC: 0.1% accuracy 5.5 digit

resolution with Null capability

(referenced measurements)

Agilent Technologies 34401A

Fluke 8842A-09

Keithley 2001

Leveled Sine Wave

Generator

Relative output level accurate

to ±0.3 dB into 50 Ω

1 to 100 MHz frequency

range Output adjustable to 18

dBm

Tegam SG503 with TM

series mainframe and

matching output cable.

A semiautomatic software

leveled signal source

calibrated with a power

meter may be substituted.

DC Power Supply

Output adjustable to > 6 V at

1 A

Agilent Technologies

E3610A

Calibration Fixture,

50 Turn Loop

50 Turn loop in series with 0.5

Ω ±0.2% resistor with sense

terminals

Teledyne LeCroy CP015-

CF02

Calibration Fixture,

High Speed Shunt

50 Ω Termination into single

turn loop.

VSWR < 1.25: 1 DC –50

MHz

Teledyne LeCroy CP015-

CF01

Calibration Fixture

ProBus Extension Cable

Teledyne LeCroy PROBUS-

CF01

BNC Adapter, T

Male-to-Dual-Female

Pomona 3285

BNC coaxial cable

Male-Male BNC, 50 Ω, 36”

Pomona 5697-36

Banana Plug adapter

BNC Female-to-Banana Plug

Pomona 1269

Patch Cables

(4 required)

Male Banana-to-Male

Banana, 12”

Pomona B-12-0 (black)

Pomona B-12-2 (red)

10 / 25

Tabla de contenidos

Otros manuales de Instrumento de medición de Teledyne Lecroy

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook ZS4000 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PP008 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PPE6KV-A Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HVFO108 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HVD3000 Series Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PP011-1 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy Frontline BPA 600 Instrucciones de montaje

Teledyne Lecroy

Teledyne Lecroy ADP300 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy CP030 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy Frontline Sodera LE Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PCI Express 5.0 U.2 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy ZD500 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PP016 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy USB Advisor T3 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HVD3000 Series Manual de usuario

Teledyne Lecroy

Teledyne Lecroy PP011-2 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy M42de Manual de usuario

Teledyne Lecroy

Teledyne Lecroy WaveRunner 8000-R Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HVFO108 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy Frontline SD Manual de usuario

Teledyne Lecroy

Teledyne Lecroy AP033 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy Summit T416 Manual de usuario

Teledyne Lecroy

Teledyne Lecroy M41h Manual de usuario

Teledyne Lecroy

Teledyne Lecroy HVFO103 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario