Soleus Air SG-PAC-12E1HP Manual de usuario

_'_j_Ii_yG, CI_' _i_,_

!3¸¸¸_!!ili_'_:__i_;iii_

SG-PAC-12E1

SG-PAC- 12E 1HP

12,000 BTU Portable Air

Conditioner

Operatin! nstructions

Thank you for choosing a Soleus Air Powered by Gree Portable Air Conditioner. This owner's man-

ual will provide you with valuable information necessary for the proper care and maintenance of your

new product. Please take a few moments to thoroughly read the instructions and familiarize yourself

with all the operational aspects of your new Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name:

Location:

Date Purchased:

Serial Number (located on back of unit):

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner's manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this manual.

3) Maintain at least 12 inches (50 cm) clearance space around this unit. Do not block or cover air inlet or outlet grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced by the

manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

PACKAGE CONTENTS

Portable Air Conditioner

Exhaust Hose (1)

Front Exhaust Hose Adapter (1)

Window Kit Adapter (1)

Rear Exhaust Hose Adapter (1)

Remote Control & AAA Batteries (2 batteries)

Window Kit - 3 Sliding Panels (1 single hose panel, 2 extension panels)

Owner's Manual

SPECIFICATIONS

• The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.

• Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.

• Power consumption is measured when the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

• If the environment temperature is higher than the max operating temperature or lower than the minimum operating

temperature, the air conditioner may not work properly.

• Dehumidifier mode works when ambient temperatures are between 61°F - 86°F

• Air Conditioner mode operates up to an ambient temperature of 95°F.

SG-PAC-12E1 SG-PAC-12EIHP (with Heat)

1/115/60Hz 1/115/60Hz

81.6 81.6

12,000 12,000

10,500

1465 1465

1200

13 13

10.6

55/53/51 55/53/51

235/205/175 235/205/175

17.75 x 33.125 x 17.125 17.75 x 33.125 x 17.125

80 80

R-410A R-410A

LCDI POWER CORD AND PLUG

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and

plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord

with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the

nominal current leakage between the cord shield and either load conductor exceeds a predetermined value.

The cord will remain de-energized until the devise has been manually reset. This is intended to reduce the risk

of a fire in the power cord or combustible materials nearby. The cord shields are not grounded and they must

be considered a shock hazards if exposed. The cord shield must not be connected to ground or to any exposed

metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet

2. Press TEST Button, circuit should trip, cutting power to the air conditioner

3. Press RESET button for use

If a test is performed and the indicator light remains ON, current leakage has been detected. Do not use the air

conditioner or attempt to reset the LCDI Plug. Contact Soleus Air Powered by Gree Customer Service for trou-

bleshooting recommendations.

RESET

TEST

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as "ON" and "OFF" switches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.

PRODUCT DIAGRAM

Air Outlet &

Louvers

Carry Handle

Control Panel

Filter

Location Upper Air Intake

-- Air Exhaust Vent

-- Lower Air Intake

PARTS & WINDOW KIT ASSEMBLY

PARTS

EXHAUST HOSE & ADAPTERS

PARTS iNCLUDED

Front Exhaust Hose

Adapter Rear Exhaust Hose

Adapter Exhaust Hose

Window Kit Adapter

ASSEMBLY & INSTALLATION

INSTALLATION

When the unit is operating as an air conditioner or dehumidifier, the window kit and exhaust hose must be installed.

When the unit is operating in fan mode, the window kit and exhaust hose do not need to be installed.

MOUNTING THE EXHAUST HOSE

• Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove

packaging and locate components.

• Extend both ends of the exhaust hose approximately 6 inches.

• Screw the REAR and FRONT Exhaust Hose Adapters onto each end of the exhaust hose. Once both

adapters are attached, attach the Window Kit Adapter to the REAR Exhaust Hose Adapter.

• Connect the FRONT Exhaust Hose Adapter to the back of your portable air conditioner.

• Attach the Window Kit Adapter to the window kit.

• For maximum efficiency bend the exhaust hose as little as possible once installation is complete.

SINGLE HOSE WINDOW KIT INSTALLATION

|ns ||ation of the

FOR SINGLE HOSE PORTABLE AIR

When installing the exhaust hose, try and keep it as flat as possible. The less angles and bends

in the hose, the better the unit will perform. If bending or an angle is necessary, use single 90 °

angles like the pictures above. Multiple bends will decrease performance and efficiency

CONTROL PANEL

SG-PAC-12E1

COOL MODE LIGHT DRY MODE LIGHT ,_

BUCKET FULL LIGHT /LED DISPLAY

MODE BUTTON

FAN MODE LIGHT

POWER BUTTON

_ODE V A ON/OFF

TEMP SELECT BUTTONS

SG-PAC-12EIHP

HEAT MODE LIGHT DRY MODE LIGHT ',

COOL MODE LIGHT

LED DISPLAY

1FAN MODE LIGHT

MODE BUTTON POWER BUTTON

O_4/OFF

TEMP SELECT BUTTONS

CONTROL PANEL FUNCTIONS

CONTROL PANEL OPERATING INSTRUCTIONS

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes:

Air Conditioner, Dehumidifier (DRY), Fan only, and Heater mode (NOTE: Heater mode is only available

on the SG-PAC-12E 1HP). Each press of the MODE button will light up a different mode icon on the con-

trol panel. The exhaust hose and window kit must be installed when the unit is in Air Conditioner,

Dehumidifier (DRY), or Heater (SG-PAC-12E1HP only) mode. When using the unit as a fan, it is not

necessary to keep the exhaust hose and window kit connected to the unit.

3) Temperature - Select the desired temperature by pressing either • or • key when using the unit in

Cooling or Heating (SG-PAC-12E 1HP only) mode. The digital thermostat will display the set temperature.

4) Bucket Full - When the unit cannot evaporate the collected moisture fast enough, the excess water will

collect in a backup water tank located inside the unit. The Bucket Full icon (SG-PAC-12E1) or Heat Mode

icon (SG-PAC-12E 1HP) will light up if this occurs. The unit will then beep 8 times and the LED display

will show "H8". The compressor will now shut off. You should now drain the excess water from the unit.

To do this, get a small pan and place it under the drain plug on the bottom of the back of the unit. Remove

the plug and slightly tilt the unit backwards to drain the water into the pan.

REMOTE CONTROL OPERATING INSTRUCTIONS

REMOTE CONTROL

SIGNAL TRANSMITTER

ON/OFF

* Press the ON/OFF (POWER) button once to manually

turn the unit on. Press the Power button once snore to

turn the unit off.

MODE

Press the MODE Button repeatedly to cycle between the

different modes.

AUTO

:_ COOL

$_ DRY

_ FAN

_HEAT NOTE: Heat Mode is only

available on SG-PAC-12E1HP

-/+

When the unit is in Air Conditioner or Heater (SG-PAC-

12E1HP) mode you can select your desired temperature.

Press the TEMP SELECT buttons (+ or -) to select

your desired temperature setting. The tesnperature on the

LCD display on the remote control will increase or de-

crease accordingly. Hold the +/- buttons for two seconds

to rapidly increase or decrease the temperature. Temp.

range is 61°F--86°F.

FAN

Press the Fan Speed button to change fan speeds.

FanSpeeds: 7Auto-- -

dLow Speed Jd Medium Speed

High Speed

NOTE: When the unit is in Dehumidifier (DRY) mode,

the fan speed is not adjustable.

Press the Up and Down Swing Button to turn on and off

the vertical swing mode. In vertical swing mode, the lou-

vers will rotate up and down to circulate snore air.

When the unit is off, press the Up and Down Swing But-

ton and "+" at the same time to enable stationary swing

mode. Stationary Swing mode allows for snore control

over the way the louvers swing up and down. The Swing

icon on the Remote LCD will blink twice when this is

@| Blinks for 2 Seconds

In Stationary Swing mode, press the Up and Down

Swing Button to change the swing pattern per below:

*'1+'| *-I

OFF÷,1 * .,11

- Disable Stationary Swing Mode by pressing the Up and

Down Swing Button and "+" button at the same time.

The Swing Icon on the Remote LCD will blink twice

when this is disabled.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Acondicionador de aire de Soleus Air

Soleus Air

Soleus Air PE2-07R-62 Manual de usuario

Soleus Air

Soleus Air MAC 7500 Manual de usuario

Soleus Air

Soleus Air TTWM1-10-01 Manual de usuario

Soleus Air

Soleus Air HCC-C09HP-A Manual de usuario

Soleus Air

Soleus Air Soleus LX-100 LX-100 Manual de usuario

Soleus Air

Soleus Air HCB-R135-A-ID Manual de usuario

Soleus Air

Soleus Air KC-45H Hoja de especificaciones

Soleus Air

Soleus Air HCC-W08ES-A1 Manual de usuario

Soleus Air

Soleus Air WM1-05M-01 Manual de usuario

Soleus Air

Soleus Air HCC-C09HP-A Manual de usuario

Soleus Air

Soleus Air KFH-12/KFH-12-1 Manual de usuario

Soleus Air

Soleus Air KFHHP-22 Hoja de especificaciones

Soleus Air

Soleus Air KFHHP-09-OD Hoja de especificaciones

Soleus Air

Soleus Air WS3-06E-201 Manual de usuario

Soleus Air

Soleus Air WM1-05M2-01 Manual de usuario

Soleus Air

Soleus Air SG-WAC-18HCE Manual de usuario

Soleus Air

Soleus Air SG-WAC-06ESE-C Manual de usuario

Soleus Air

Soleus Air HCC-C09H26-A Manual de usuario

Soleus Air

Soleus Air SG-WAC-15ESE-C Manual de usuario

Soleus Air

Soleus Air KFMHP-18-ID Manual de usuario

Soleus Air

Soleus Air PE4-12R-03 Manual de usuario

Soleus Air

Soleus Air MAC 7500 Manual de usuario

Soleus Air

Soleus Air WS2-15E-201 Manual de usuario

Soleus Air

Soleus Air KY-34 Manual de usuario

Manuales populares de Acondicionador de aire de otras marcas

Spheros

Spheros CC 355 Manual de usuario

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manual de usuario

Panasonic

Panasonic CS-E12HKEW Manual de usuario

nedis

nedis ACMB1WT7 Manual de usuario

Samsung

Samsung AR KV Series Guía

Daikin

Daikin FCFV50A Manual de usuario

Fujitsu

Fujitsu Inverter ASBA30JFC Manual de usuario

Toshiba

Toshiba RAS-M10SMUV-E Manual de usuario

Daikin

Daikin FXLQ20MAVE Manual de usuario

Hitachi

Hitachi RAS-E24CAK Manual de usuario

CIAT

CIAT Magister 2 Series Guía

Bestron

Bestron AAC6000 Manual de usuario

Hisense

Hisense 7K Manual técnico

Frigidaire

Frigidaire FFRE0533S1E0 Manual de usuario

Samsung

Samsung AS09HM3N Manual de usuario

Frigidaire

Frigidaire CRA073PU11 Manual del propietario

McQuay

McQuay MCK020A Manual de usuario

Webasto

Webasto Frigo Top 25 DS Manual de usuario