Soleus Air GM-PAC-10E2 Manual de usuario

10,000 BTU Portable Air Conditioner

Operating Instructions

Model No. GM-PAC-10E2

Thank you for choosing a Soleus Air Powered by Gree Portable Air Conditioner. This owner’s man-

ual will provide you with valuable information necessary for the proper care and maintenance of your

new product. Please take a few moments to thoroughly read the instructions and familiarize yourself

with all the operational aspects of your new Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this

manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or

outlet grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this

manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced

by the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

12) Avoid using heating appliance near the air conditioner.

LCDI POWER CORD AND PLUG

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and

plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord

with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the

nominal current leakage between the cord shield and either load conductor exceeds a predetermined value.

The cord will remain de-energized until the devise has been manually reset. This is intended to reduce the risk

of a fire in the power cord or combustible materials nearby. The cord shields are not grounded and they must

be considered a shock hazards if exposed. The cord shield must not be connected to ground or to any exposed

metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet

2. Press TEST Button, circuit should trip, cutting power to the air conditioner

3. Press RESET button for use

If a test is performed and the indicator light remains ON, current leakage has been detected. Do not use the air

conditioner or attempt to reset the LCDI Plug. Contact Soleus Air Powered by Gree Customer Service for trou-

bleshooting recommendations.

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as ĀONāand ĀOFFāswitches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.

RESET

TEST

INCLUDE

PARTS INCLUDED

Window Exhaust Adapter A

Screw (7 )

Exhaust Hose Window Exhaust Adapter C

Adjustable Window Slider (3)

Hose clip(2) Rubber plug Battery

(AAA.1.5V)

INCLUDE

Window ExhaustAdapter B

SUGGESTED TOOLS FOR WINDOW PANEL

INSTALLATION

1. Screwdriver(medium size Phillips) 2. Tape measure or ruler 3. Knife or scissors

4. Saw (In the event that the window panel needs to be cut down in size because the window is too narrow for

direct installation.)

Manual

Remove control

Drain hose Hose Clamp

hook(2)

Power cord

(2 )

1, Control panel and display lamp

2, Remove control signal receiver window

3, Handel

4, Remote controller box

Air outlet

6, Vertical louvers

7, Horizontal louvers

8, Wheel

9, Air inlet

10, Grille

11, Air outlet

12,Air inlet

13,Power cord hook

14, Power cord

15, Window exhaust adapter A

16, Exhaust hose

17, Window exhaust adapter

18, Window exhaust adapter

19, Remove control

STRUCTURE

Front

Rear

SPECIFICATIONS

x The cooling capacity is measured at an ambient temperature of DB 95 °F, WB 83 °F.

x Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.

x Power consumption is measured when the fan runs at the highest speed setting.

x These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

x If the environment temperature is higher than the max operating temperature or lower than the minimum operating

temperature, the air conditioner may not work properly.

PACKAGE CONTENTS

Portable Air Conditioner

Exhaust Hose (1)

Window Exhaust Adapter A (1)

Window Exhaust Adapter B (1)

Window Exhaust Adapter C (1)

Remote Control & AAA Batteries (2 batteries)

Window Kit - 3 Sliding Panels (1 single hose panel, 2 extension panels)

Drain Hose Assembly (drain pipe, hose clamp, hose clip, rubber plug, & screw)

Owner’s Manual

Model Number

Power Supply (Ph/V/Hz) 1/115/60Hz

Dehumidifying Capacity (Pints/Day) 60

Rated Cooling Capacity (BTU/h) 10,000

Rated Heating Capacity (BTU/h) /

Cooling Power Input (Watts) 1120

Heating Power Input (Watts) /

Rated Current Cooling (Amperage) 9.9

Rated Current Heating (Amperage) /

EER/C.O.P /

Noise Level db (A) H/L <=53

CFM 176

Design Pressure (PSIG) (H/L) /

Dimensions (W” x H” x D”) 13.375X30.75X15.5

Package Dimensions (W” x H” x D”)

Net/Gross Weight (Lbs) 53/66

Refrigerant Charge (Oz) 17

Refrigerant Type R-410A

Power cord hooks (2hooks & screws)

GM-PAC-10E2

15.75 X 32X 21.75

•

Attach the hooks to the back of air conditioner with the screws.

hoook

screw

•

Wind the power cord round the power cord hooks.

INSTALLATION OF THE POWER CORD HOOK

PARTS & WINDOW KIT ASSEMBLY

PARTS

EXHAUST HOSE & ADAPTERS

ASSEMBLY & INSTALLATION

INSTALLATION

When the unit is operating as an air conditioner or dehumidifier, the window kit and exhaust hose must be installed.

When the unit is operating in fan mode, the window kit and exhaust hose do not need to be installed .

MOUNTING THE EXHAUST HOSE

x Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove

packaging and locate components.

x Extend both ends of the exhaust hose approximately 6 inches.

x Screw the window kit adapter onto one end of the exhaust hose clockwise. Screw the hose adapter onto

the other end of the exhaust hose clockwise.

x Mount the exhaust hose onto the back of the unit by locking the hose adapters into place.

x For maximum efficiency do not bend the hose as much as possible.

Exhaust Hose Adapter

Exhaust Hose

Hose

Adapter

SINGLE HOSE WINDOW KIT INSTALLATION

When installing the exhaust hose, try and keep it as flat as possible. The less angles and bends

in the hose, the better the unit will perform. If bending or an angle is necessary, use single 90°

angles like the pictures above. Multiple bends will decrease performance and efficiency

This installation is OK The is a poor installation

22”

26”

CONTROL PABEL & DISPLAY

When pressing key is valid, buzzer makes a sound, indicate dlamp indicates relevant state, syste mwill last for

2 seconds.

OPERATING INSTRUCTIONS

3.MODE Button

4. Fan speed

When the unit is running in Cool or Fan mode,press the Fan speed Button to select the fan speed

in High,

Middle, Low , Auto.

In cool mode, it can decrease the temperature of the room, and make people very

comfortable.

ON/OFF Button

2. "+","-" Button

In COOL mode, press "-" once, the set temperature will decrease 1 , press "+" once, the set temperature will

(F)

Receiver window

LED window

DRY mode lamp

Temperature selection button COOL mode lamp

MODE buttonFAN mode lampFAN Speed lamp ON/OFF button

Fan speed button

Button

CONTROL PANEL DISPLAY & OPERATING INSTRUCTIONS

6. Louver Direction

This unit has 4-Way directional louvers.

Use the louver guides to direct air where

cooling or fanning is needed most.Hold the

louver and adjust the air flow direction,

as show in the right diagram.

5.Water Full

When COOL or DRY is running, condensate will drain to

water tank. When water tank is filled. buzzer will sound 8

times, LED screen show error code ‘H8’.

In this case, reference page 8 to drain out water intank.

Press the button once to manually turn the unit on. Press once more to turn the unit off.

Press MODE Button repeatedly to cycle between the modes:Cooling,Dry,and Fan only mode.

Each press of

the MODE

button will light up a different lamp on the control panel. The exhause

hose and window kit must

be installed when the

unit is in Co

olor Dry mode.When using the unit

as a fan,it is unnecessary to keep the

exhaus

t hose and window kit

connected to the unit.

Hold this hand grip to adjust the

direction of Horizontal Louvers

Hold this hand grip to adjust the

direction of Vertical Louvers

incresae 1C ( F).The set temperature rang from 16 Cto 30 C(61 F to 86 F)

Otros manuales para GM-PAC-10E2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Acondicionador de aire de Soleus Air

Soleus Air

Soleus Air Air condioner Manual de usuario

Soleus Air

Soleus Air WM1-05M-01 Manual de usuario

Soleus Air

Soleus Air PE2-07R-62 Manual de usuario

Soleus Air

Soleus Air HCB-P11-A Manual de usuario

Soleus Air

Soleus Air PH3-09R Manual de usuario

Soleus Air

Soleus Air GM-WAC-06SE-C Manual de usuario

Soleus Air

Soleus Air PE3-12R-03 Manual de usuario

Soleus Air

Soleus Air KFHIP-09-OD Hoja de especificaciones

Soleus Air

Soleus Air PH4-12R-01 Manual de usuario

Soleus Air

Soleus Air MAC 7500 Manual de usuario

Soleus Air

Soleus Air PE2-09R-32 Manual de usuario

Soleus Air

Soleus Air PE8-11R-32 Manual de usuario

Soleus Air

Soleus Air GM-CAC-08ESE Manual de usuario

Soleus Air

Soleus Air PSH-09-01 Manual de usuario

Soleus Air

Soleus Air PH-3-12R-03 Manual de usuario

Soleus Air

Soleus Air TTWM1-10-01 Manual de usuario

Soleus Air

Soleus Air WM1-15E-01 Manual de usuario

Soleus Air

Soleus Air SG-PTAC-09HPDA Manual de usuario

Soleus Air

Soleus Air HCC-W08ES-A1 Manual de usuario

Soleus Air

Soleus Air SG-WAC-25ESE-C Manual de usuario

Soleus Air

Soleus Air KY4-100 Manual de usuario

Soleus Air

Soleus Air KFHHP-18-ID Hoja de especificaciones

Soleus Air

Soleus Air KY-32H Manual de usuario

Soleus Air

Soleus Air SG-TTW-12HC Manual de usuario

Manuales populares de Acondicionador de aire de otras marcas

Spheros

Spheros CC 355 Manual de usuario

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manual de usuario

Panasonic

Panasonic CS-E12HKEW Manual de usuario

nedis

nedis ACMB1WT7 Manual de usuario

Samsung

Samsung AR KV Series Guía

Daikin

Daikin FCFV50A Manual de usuario

Fujitsu

Fujitsu Inverter ASBA30JFC Manual de usuario

Toshiba

Toshiba RAS-M10SMUV-E Manual de usuario

Daikin

Daikin FXLQ20MAVE Manual de usuario

Hitachi

Hitachi RAS-E24CAK Manual de usuario

CIAT

CIAT Magister 2 Series Guía

Bestron

Bestron AAC6000 Manual de usuario

Hisense

Hisense 7K Manual técnico

Frigidaire

Frigidaire FFRE0533S1E0 Manual de usuario

Samsung

Samsung AS09HM3N Manual de usuario

Frigidaire

Frigidaire CRA073PU11 Manual del propietario

McQuay

McQuay MCK020A Manual de usuario

Webasto

Webasto Frigo Top 25 DS Manual de usuario