Soleus Air PSR-06-01 Manual de usuario

V180131

3058080

Air conditioner must be upright for 24 hours prior to operating.

This ensures that the compressor will function as intended.

Thank you for choosing a Soleus Air Portable Air Conditioner. This Owner’s Manual will provide

you with valuable information necessary for the proper care and maintenance of your new product.

Please take a few moments to thoroughly read the instructions and familiarize yourself with all the

operational aspects of your new Soleus Air Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the

store name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: _____________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store

this manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this

manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or

outlet grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this

manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced

by the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

12) Do not mix old and new batteries in the remote control.

IMPORTANT INSTRUCTIONS

PURCHASE INFORMATION

Model Number PSR-06-01 PSR-08-01 PSR-10-01

Cooling Capacity 6,000 BTU/Hr 8,000 BTU/Hr 10,000 BTU/Hr

Dehumidification 76 pts/Day 101 pts/Day 116 pts/Day

Cooling Power

Usage

704 Watts

6.2 Amps

938 Watts

8.9 Amps

1172 Watts

10.2 Amps

Air Flow (High/Low) 205/164 CFM 205/164CFM 205/164 CFM

Power Source 115 V / 60 HZ 115 V / 60 HZ 115 V / 60 HZ

Noise Level dB(A) 53-55 dB 53-55 dB 53-55 dB

Product Weight 49.6 Lbs. 49.6 Lbs. 49.6 Lbs.

Operating

Temperature 61℉-88℉61℉-88℉61℉-88℉

Product Dimension

(W x H x D) 12.25”×29.87”

×13.25”

12.25”×29.87”

×13.25”

12.25”×29.87”

×13.25”

Refrigerant R-410A R-410A R-410A

Portable Air Conditioner (1)

Exhaust Hose (1)

Exhaust Hose Connector (1)

Window Kit Panel (3)

Window Kit Adapter (1)

Wing Nut (2)

Optional Drain Tube (1)

Drain Tube Stopper (1)

Remote Control (1)

AAA Battery (2)

Owner’s Manual (1)

Optional Window Security Pack (1)

PACKAGE CONTENTS

SPECIFICATIONS

• The cooling capacity is measured at an ambient temperature of DB 95˚F, WB 83 ˚F.

• Noise level is measured at a distance of 3.28 ft away from the front of the unit, when

the unit is in cooling mode.

• Power consumption is measured when the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating

label on the back of the unit.

• If the environment temperature is higher than the max operating temperature or lower

than the minimum operating temperature, the air conditioner may not work properly.

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord

and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexi-

ble cord with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the

nominal current leakage between the cord shield and either load conductor exceeds a predetermined value.

The cord will remain de-energized until the devise has been manually reset. This is intended to reduce the

risk of a fire in the power cord or combustible materials nearby. The cord shields are not grounded and they

must be considered a shock hazards if exposed. The cord shield must not be connected to ground or to any

exposed metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet, the LED light will turn on.

2. Press TEST Button, circuit should trip, cutting power to the air conditioner. When this occurs,

the LED light will turn off.

3. Press RESET button to restore power to the unit. Once power is restored, the LED light will turn

on again.

If test button is pressed and unit can still be turned on, current leakage has been detected. Do not use the air

conditioner or attempt to reset the LCDI Plug. Contact Soleus N.A. Customer Service for troubleshooting

recommendations.

Note: Your unit’s power cord may

differ from the one shown.

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as “ON” and “OFF” switches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.

RESET

TEST

POWER CORD AND PLUG

PRODUCT DIAGRAM

1. Control Panel

2. Manual Control Louver & Air Outlet

3. Carry Handle

4. Caster

5. Air Filter

6. Air Filter

7. Hot Air Discharge Opening

8. Air Intake Grille

9. Condensation Drain Hole

10. Exhaust Hose

11. Exhaust Hose Connector

12. Window Kit Adapter

13. Window Kit Panels

14. Wing Nuts

15. Optional Drain Tube

16. Drain Tube Stopper

17. Remote Control

18. Batteries

19. Optional Window Security Pack

MODEL# PSR-06-01/PSR-08-01/PSR-10-01

WINDOW VENTING KIT

OPTIONAL WINDOW SECURITY BRACKET

ASSEMBLY & INSTALLATION

When the unit is operating in air conditioning mode, the unit draws in indoor air and exhausts hot air out of the room

to complete the air exchange. The Window Kit must be installed when operating the unit in air conditioning, dehu-

midification. When the unit is operating in Fan Mode, no outdoor air exchange takes place. The window kit and ex-

haust hose do not need to be installed when the unit is used as a fan.

The supplied window kit can be installed in sliding windows and sliding glass doors up to 7 ft. long

(approximate length). When installed, be sure to keep the exhaust hose and short and straight as possible for

maximum efficiency.

PARTS & ASSEMBLY

Window Kit Adapter

WINDOW KIT ASSEMBLY

PORTABLE AIR CONDITIONER

The window venting kit must be installed in order for the unit to work correctly. The window venting kit has been de-

signed to fit into most vertical and horizontal window openings and sliding glass doors up to 7 feet..

1. Open the window or door to adjust the length of the Window

Kit Panels to fit the opening. If necessary, mark the kit and cut

one end down to properly fit the opening.

2. Twist the Exhaust Hose Connector over the discharge opening

on the back of the unit and extend the Exhaust Hose. (Keep the

exhaust hose as short and straight as possible)

3. Attach the Window Kit Adapter to the Exhaust Hose. Then attach

the Window Kit Adapter to the Window Kit panel. Close the window

or door tightly.

WINDOW KIT INSTALLATION

Keep the exhaust hose

as short and straight as

possible for maximum

efficiency.

Window Kit Adapter

Optional Security Bracket Installation

Your Window Kit also includes an optional security bracket that can be installed to prevent the window from being

opened from the outside while a Window Kit is installed.

SECURITY BRACKET

Single and Double Hung Windows

Sliding Windows

OPERATING INSTRUCTIONS FOR CONTROL PANEL BUTTONS

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Air

Conditioner (Cool) mode, Fan-only mode, Dehumidifier (Dry) mode, Sleep mode, and Auto mode.

Each press of the MODE button will light up a different indicator on the control panel. The exhaust

hose and window kit must be installed when the unit is in Air Conditioner, Dehumidifier mode, Auto

mode, and Sleep mode. When using the unit as a fan, the window kit is not required.

3) Temperature - Select the desired temperature by pressing either the ▲ or ▼ button when using the

unit in Air Conditioner mode. The temperature indicator flashes to display the desired temperature set-

ting. After the temperature is set, the unit will display this temperature setting until it is changed by the

user. The temperature indicator display shows temperature in Fahrenheit. While the unit is plugged in,

but not powered on, press and hold the▲ and▼ buttons for 3 seconds to switch between Celsius and

Fahrenheit.

4) Fan Speed - Press FAN SPEED button to choose fan speed in High, Medium or low.

5) Timer - Press TIMER button to set the unit automatically turn ON or OFF. Use the ▲ and ▼buttons

to program the hour increment.

6) Turbo Cool - When Turbo Cool is activated, the unit will cool at 61°F on fan high for 10 minutes and

then return to the original settings.

7) Bucket Full - When the unit cannot evaporate the collected moisture fast enough, the excess water

will collect in a backup water tank located inside the unit. The BUCKET FULL indicator will light up.

8) Louver Direction - This unit has 2-way directional louvers. Use the louver guides manually to direct

air up and down.

Sleep Mode

Indicator

Fan Speed

Indicators

Auto Mode

Indicator

Air Conditioner

Mode Indicator

Fan Mode

Indicator

Bucket Full

Indicator

Turbo Cool

Indicator

Timer

Indicator

Dehumidifier Mode

Indicator

CONTROL PANEL

Power

Indicator

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Acondicionador de aire de Soleus Air

Soleus Air

Soleus Air PE4-12R-03 Manual de usuario

Soleus Air

Soleus Air Air condioner Manual de usuario

Soleus Air

Soleus Air GB-WAC-06SE-C Manual de usuario

Soleus Air

Soleus Air PE1-09R-30 Manual de usuario

Soleus Air

Soleus Air MAC-8000 Manual de usuario

Soleus Air

Soleus Air SG-TTW-09ESE-26 Manual de usuario

Soleus Air

Soleus Air HCB-P08-B Manual de usuario

Soleus Air

Soleus Air KC-45H Hoja de especificaciones

Soleus Air

Soleus Air KFMHP-18-ID Manual de usuario

Soleus Air

Soleus Air PE4-11R-03 Manual de usuario

Soleus Air

Soleus Air Mobile Comfort KY-80G Manual de usuario

Soleus Air

Soleus Air SG-WAC-15ESE Manual de usuario

Soleus Air

Soleus Air GM-PAC-08E3 Manual de usuario

Soleus Air

Soleus Air KY-34 Manual de usuario

Soleus Air

Soleus Air MAC-10K Manual de usuario

Soleus Air

Soleus Air KFR/KFS Series Manual de usuario

Soleus Air

Soleus Air KY-32E Manual de usuario

Soleus Air

Soleus Air SG-WAC-25HCE Manual de usuario

Soleus Air

Soleus Air FE-08BA Manual de usuario

Soleus Air

Soleus Air iCongo PSQ-08-01 Manual de usuario

Soleus Air

Soleus Air PSX-08-01B Manual de usuario

Soleus Air

Soleus Air WS4-10EHW-301 Manual de usuario

Soleus Air

Soleus Air TTWM1-10-01 Manual de usuario

Soleus Air

Soleus Air HP-12 Manual de usuario

Manuales populares de Acondicionador de aire de otras marcas

Spheros

Spheros CC 355 Manual de usuario

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manual de usuario

Panasonic

Panasonic CS-E12HKEW Manual de usuario

nedis

nedis ACMB1WT7 Manual de usuario

Samsung

Samsung AR KV Series Guía

Daikin

Daikin FCFV50A Manual de usuario

Fujitsu

Fujitsu Inverter ASBA30JFC Manual de usuario

Toshiba

Toshiba RAS-M10SMUV-E Manual de usuario

Daikin

Daikin FXLQ20MAVE Manual de usuario

Hitachi

Hitachi RAS-E24CAK Manual de usuario

CIAT

CIAT Magister 2 Series Guía

Bestron

Bestron AAC6000 Manual de usuario

Hisense

Hisense 7K Manual técnico

Frigidaire

Frigidaire FFRE0533S1E0 Manual de usuario

Samsung

Samsung AS09HM3N Manual de usuario

Frigidaire

Frigidaire CRA073PU11 Manual del propietario

McQuay

McQuay MCK020A Manual de usuario

Webasto

Webasto Frigo Top 25 DS Manual de usuario