Silver Cross REFLEX Manual de usuario
IMPORTANT: KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE
Reflex
2
Warranty
All Silver Cross products are guaranteed
for a period of 36 months against faulty
workmanship, when the product is used
correctly according to the instruction
manual.
Garantie
Tous les produits Silver Cross sont garantis
pour une période de 36 mois contre tout
défaut de fabrication, si le produit est utilisé
conformément au manuel d’instructions.
Garantía
Todos los productos de Silver Cross incluyen
una garantía de 36 meses contra defectos
de fabricación, siempre que el producto se
utilice correctamente de acuerdo con el
manual de instrucciones.
Garanzia
Tutti i prodotti Silver Cross sono garantiti
per un periodo di 36 mesi contro difetti di
fabbricazione, purché il prodotto venga
utilizzato correttamente, in conformità al
manuale delle istruzioni.
Garantie
Für alle Produkte von Silver Cross besteht
für den Fall von Herstellungsmängeln eine
Garantie von 36 Monaten, sofern das Produkt
sachgemäß wie in der Bedienungsanleitung
angegeben gebraucht wurde.
Garanti
Alla Silver Cross-produkter har 36 månaders
garanti som gäller tillverkningsfel förutsatt
att produkten har använts korrekt i enlighet
med bruksanvisningen.
Гарантия
На всю продукцию Silver Cross
действует гарантия сроком 36 месяцев,
покрывающая случаи производственного
брака, при условии использования
изделия в соответствии с инструкциями.
保修
在依据说明书正确使用产品的情况下，所有
Silver Cross产品对工艺质量问题保修期为
36个月。
保養期
所有 Silver Cross 產品均可享有36個月保
養期，提供在按照指引說明書正確使用下的
工藝缺憾保養。
Silver Cross
3
silvercrossbaby.com
These instructions are
important.
Read these instructions carefully before
use and keep them for future reference.
Your child’s safety may be aected if you
do not follow these instructions.
Your Reex pushchair is a high quality
Silver Cross product. It meets current
safety standards and care and regular light
maintenance will ensure long service.
This vehicle is intended for children from
birth to 25kg. If somebody unfamiliar is
using your Reex pushchair always ensure
that they read these instructions carefully
so that they understand how the product
works best. Always read all the instructions
provided carefully and remember, the
safety of your child is your responsibility.
WARNING: NEVER LEAVE YOUR
CHILD UNATTENDED.
Contents
Your Reex pushchair includes the
following components, please check that
you have all the items before proceeding:
1.1 Reex Pushchair Chassis,
Seat Fabrics and Basket
1.2 Reex Hood
1.3 Reex Raincover
1.4 Reex Front Wheel Assembly x2
1.5 Reex Bumper Bar
1.6 Reex Head Hugger
1.7 Reex Chest Pads and Crotch Pad
1.1 1.2
1.3
1.4 1.5
1.6 1.7
4
Assembling the Reex
2.1 Attach the swivel wheels by locating
the wheel under the steel attachment
pin. Slide the wheel upwards and
press until the wheel clicks into
position.
WARNING: CHECK
THE WHEEL IS SECURE
BY PULLING GENTLY
DOWNWARDS.
Repeat on both sides. Your Reex is
now ready to be unfolded.
2.2 Locate the locking catch on each side
of the pushchair and lift to release
from the locking stud.
2.3 Allow the pushchair to open by lifting
the handles upwards and the wheels
will naturally fall to the oor.
2.1
2.3
2.2
5
silvercrossbaby.com
Assembling the Reex
(continued)
2.4 Finally, press down gently upon
the rear locking catch, positioned
between the rear wheels, to lock your
pushchair.
WARNING: FAILURE TO DO
THIS WILL CAUSE DAMAGE
TO YOUR PUSHCHAIR.
Place the pushchair on a at surface
and ensure that the pushchair moves
freely.
2.5 To t your Reex hood, locate the
clips on the hood. Now attach the
hood to the Reex chassis by sliding
clips over the hood connection
bracket. A positive engagement
should be ensured.
2.6 Connect the fabric of the hood
to the fabric of the seat with two
press studs, one on each side of the
pushchair.
2.7 Connect the fabric of the hood to
the rear leg of the chassis with two
press studs, one on each side of the
pushchair.
2.4
2.5
2.6 2.7
6
Assembling the Reex
(continued)
2.8 Your Reex hood can be opened and
folded by pulling the hood forward
or pushing backwards on the hood
frame. Your hood can also be
extended forwards by unzipping zip
as shown in diagram 2.8. Please note
when folding your Reex pushchair
you should always ensure the hood
is folded away. Failure to do this
could result in damage to your Reex
pushchair.
2.9 Your Reex pushchair has a multi-
position calf support. Locate the
adjustment levers either side of the
calf support. Pull levers towards you
and adjust to the required position.
2.8
2.9
7
silvercrossbaby.com
Reclining the Reex
3.1 Your Reex pushchair has a multi-
position recline.
3.2 First, locate the backrest adjustment
mechanism at the rear of the seat.
Pull up the recline lever and gently
lower to the desired position.
3.3 To raise the backrest locate the
recline lever and pull up gently into
the desired position. The backrest will
rise to the desired height.
NOTE: The backrest should always be
in the upright position and the hood
folded away prior to folding.
3.1
3.2
3.3
8
Using the Harness
The harness is a ve point system
consisting of shoulder straps, waist straps
and crotch strap. Before you use the
pushchair, the harness must be adjusted
to suit the size of the child.
4.1 It is very important that you make
sure the shoulder straps are the
correct height for your child. The
shoulder straps should be level or just
below your child’s shoulders.
In a safe and secure environment,
place your child in the pushchair
with the backrest upright and assess
which of the three shoulder strap
height positions is most suitable for
your child.
NOTE: Winter/Summer clothing can
make a dierence to the size of your
child.
WARNING: NEVER LEAVE
YOUR CHILD UNATTENDED
DURING THIS PROCESS.
REMOVE YOUR CHILD WHILST
THE ABOVE ADJUSTMENTS ARE
BEING MADE.
4.1
9
silvercrossbaby.com
Adjusting the Reex handles
5.1 Your Reex features 3-position
adjustable handles. The desired
position can be selected by depressing
the button shown and either pulling
up or pushing down the handles.
5.1
10
6.1 Adjusting the harness
6.1 Your Reflex pushchair has a multi-
position height adjustment for the
harness. To adjust the shoulder strap
height, start by disconnecting the
shoulder clips from the waist clips.
6.2 Pass one of the shoulder clips
through the button hole on the cover
and backrest. Once the clip is fully
through to the opposite side of the
backrest, pass it back through the
desired slot. Repeat these steps for
the other shoulder clip, ensuring that
the selected button holes are in line.
6.2
Tabla de contenidos
Otros manuales de Paseante de Silver Cross
Silver Cross
Silver Cross SURF Manual de usuario
Silver Cross
Silver Cross POP Manual de usuario
Silver Cross
Silver Cross Coast Manual de usuario
Silver Cross
Silver Cross Coast Manual de usuario
Silver Cross
Silver Cross Coast Manual de usuario
Silver Cross
Silver Cross ZEST Manual de usuario
Silver Cross
Silver Cross Jet Manual de usuario
Silver Cross
Silver Cross SURF Manual de usuario
Silver Cross
Silver Cross Sleepover Elegance Manual de usuario
Silver Cross
Silver Cross Tide Manual de usuario
Silver Cross
Silver Cross Wave Manual de usuario
Silver Cross
Silver Cross Dazzle Manual de usuario
Silver Cross
Silver Cross Pacific Manual de usuario
Silver Cross
Silver Cross Wayfarer Pushchair & Carrycot Manual de usuario
Silver Cross
Silver Cross Surf Aston Martin Edition Manual de usuario
Silver Cross
Silver Cross 3D Pram System Manual de usuario
Silver Cross
Silver Cross Sleepover Deluxe - Words Manual de usuario
Silver Cross
Silver Cross Jet Manual de usuario
Silver Cross
Silver Cross Comet Manual de usuario
Silver Cross
Silver Cross Coast Manual de usuario
