SIIG CE-H22N15-S1 Hoja de información del producto
04-1086A
HDMI 4K Extender over single
cat5e/6 Cable with IR - 60m
User Reference Guide
Introduction
The HDMI 4K Extender over single cat5e/6 Cable with IR -
60mextendsyourHDMI A/Vsignalsto aremotedisplay
up to 197ft (60m) away through a single Cat5e/6 cable.
Key Features and Benefits
• Delivers crystal clear picture quality up to 30m at
4Kx2K @60Hz, up to 60m at 4Kx2K @30Hz
• Plug-n-play. IR remote control feature allows to
remotely control the HDMI source device from the
remote display side
• Uniqueand low profile designeasily adapts intothe
environment, mounting brackets included for
differentinstallationrequirements
• High quality metal housing with ventilation panels
betterpromote heat dissipationandsystem stability
during long periods of operation
• Built-inpower indicator provideseasy power status
monitoring
2
Package Contents
•HDMI 4K Extender over single cat5e/6 Cable with IR -
60m
• Power adapters (x2)
• IR Blaster extension cable & IR Receiver extension
cable
• Mounting ears & screw kit
• UserReferenceGuide
Specifications
Version Compatible with HDMI 2.0 and HDCP 2.2
Resolution 2160p / 1080p / 1080i / 720p / 480p
Audio 2-ch PCM stereo audio
Connectors
TX:
1x 19-pin HDMI Type-A, Female
1x 8-pin RJ45
1x 3.5mm IR Blaster
RX:
1x 19-pin HDMI Type-A, Female
1x 8-pin RJ45
1x 3.5mm IR Receiver
Transmission
Distance
4Kx2K @60Hz: Up to 30m
4Kx2K @30Hz: Up to 60m
Power Adapter Input: AC 100-240V/ 50~60Hz
Output: DC 5V / 1A
3
Figure 1: Transmitter (TX) - HDMI Device Input
HDMI In IR OutPower Jack
Layout
•Power Jack: Connecttheincluded 5V/1A DCpower
adapter here
•HDMI In: Connect your HDMI source here with an
HDMI cable (cable not included)
•IR Out: Infrared 3.5mm socket. Plug IR Blaster
extension cable here. See instructions on page 7.
4
Power LED
Figure 2: Transmitter (TX) - RJ45 Output
Reset RJ45
•Reset: Press to reset if HDMI Extender doesn't work
properly
•RJ45: Link to the Receiver's RJ45 via a Cat5e/6 cable
•Power LED: On when the Transmitter is powered
5
•Reset: Press to reset if HDMI Extender doesn't work
properly
•RJ45: Link to the Transmitter's RJ45 via a Cat5e/6
cable
•Power LED: On when the Receiver is powered
Figure 3: Receiver (RX) - RJ45 Input
Power LEDReset RJ45
6
•Power Jack: Connecttheincluded 5V/1A DCpower
adapter here
•HDMIOut:Connectto yourHDMIdisplay here with
an HDMI cable (cable not included)
•IR In: Infrared 3.5mm socket. Plug IR Receiver
extension cable here. See instructions on page 7.
Figure 4: Receiver (RX) - HDMI Display Output
HDMI Out IR In
Power Jack
7
Important Note: Incorrect placement of IR Receiver
and IR Blaster cables may result in cable failures.
Pleasecheck carefullybeforeplugginginthe IRcables
to proper IR sockets.
•IR Blaster cable: PlugintotheTransmitter's IR3.5mm
socket to emit IR signals
•IR Receiver cable: Plug into the Receiver'sIR 3.5mm
socketto receive IRsignals from aremote control(for
the HDMI device connected to the Transmitter)
IR Extenders (20~60kHz IR devices supported)
Figure 5: IR Blaster cable
(Connect to Transmitter)
Figure 6: IR Receiver cable
(Connect to Receiver)
8
Hardware Installation
Note: To achieve optimal performance, a CAT6 cable is
recommended.
1. Power off all devices including your HDMI source
and display.
2. ConnectyourHDMIsourcetotheTransmitter'sHDMI
IN connector with an HDMI cable (not included).
3. Optional: Connect the IR Blaster extension cable to
the Transmitter's IR Out. Face the eye towards your
HDMI device's IR window.
4. Connectyour HDMIdisplay tothe Receiver's HDMI
OUT connector with an HDMI cable (not included).
5. Optional:Connect the IR Receiverextension cable to
the Receiver's IR In.
6. Connect and link the Transmitter and Receiver by a
CAT5e/6 cable.
7. Plug the included power adapters into the
Transmitter's andReceiver's Power Jacks, then plug
the power adapters into reliable power outlets.
8. Power on your HDMI device and HDMI display.
9. The HDMI Extender is ready for use.
9
Application
Extends HDMI signals such as game consoles, DVD
players or computers up to 197ft (60m) and supports
high resolutions up to 4Kx2K.
Figure 7: Application
DVD
IR OUT
IR IN
ReceiverTransmitter TV
* When using the remote control, please make sure its distance to the IR
Receiver extension cable is within 5 meters (16.4 ft) and without obstructions.
10
FAQ & Solutions
Q: There is no picture on the TV:
A: 1) Check whether the correct TV input is selected.
2) Make sure the HDMI cables support 4K x2K
when the output signal from the source device is
4Kx2K resolution.
3) Make sure the Network cable (CAT5e/6) is firmly
connected between TX and RX.
4) Press the "Reset" button on the TX or RX.
Q: There is black screen on the TV:
A: 1) Check the length of the Network cable (CAT6 ) is
within below:
- 4K x2K @30Hz: 60m
- 4K x2K @60Hz: 30m
2) Disconnect connections for TX and connect again.
Q: The color is abnormal/ There is no audio output:
A: Disconnect connections for TX and connect again.
Tabla de contenidos
Otros manuales de Extensor de SIIG
SIIG
SIIG CE-H21U11-S1 Manual de usuario
SIIG
SIIG AV-GM02S3-S1 Manual de usuario
SIIG
SIIG CE-H20011-S1 Manual de usuario
SIIG
SIIG HDMI 4K HDBaseT Extender Over Single Cat5e/6 Cable with IR Control -... Hoja de información del producto
SIIG
SIIG AV-GM03T3-S1 Manual de usuario
SIIG
SIIG CE-DP0511-S1 Manual de usuario
SIIG
SIIG AV-GM02D3-S1 Manual de usuario
SIIG
SIIG CE-H20S11-S1 Manual de usuario
SIIG
SIIG JU-EX0111-S1 Manual de usuario
SIIG
SIIG CE-H23E11-S1 Manual de usuario
SIIG
SIIG AV-GM02J3-S1 Manual de usuario
SIIG
SIIG CE-H24B11-S1 Manual de usuario
SIIG
SIIG AV-GM02P3-S1 Manual de usuario
SIIG
SIIG CE-H23811-S1 Manual de usuario
SIIG
SIIG AV-GM02M3-S1 Series Manual de usuario
SIIG
SIIG AV-GM04T3-S1 Series Manual de usuario
SIIG
SIIG JU-EX0011-S1 Manual de usuario
SIIG
SIIG AV-GM0403-S1 Series Manual de usuario
SIIG
SIIG AV-GM04A3-S1-IR Manual de usuario
SIIG
SIIG AV-GM03S3-S1 Manual de usuario
