SIIG Hi-Speed ExpressCard CF R/W Manual de usuario
1
Hi-Speed ExpressCard CF R/W
Quick Installation Guide
04-0475A
Introducing the ExpressCard CF R/W
The Hi-Speed ExpressCard CF R/W easily adds a high
speedCompactFlashcardreader/writertoExpressCard™
equipped systems.
Features and Benefits
• Support CF Type I/II, PIO 0-4, MDMA 0-2 and
UDMA 0-6 modes
• Compliant with ExpressCard standard
• PCIe based (not USB) reader takes advantage of
larger bus bandwidth for higher data throughput
• Suitable for laptop computers equipped with an
ExpressCard slot
• Supports Windows and Mac OS and works in both
34mm and 54mm ExpressCard slots
• Ideal for high-speed, high capacity UDMA CF
memorycards-transferslargefiles at blazing speeds
Note: Actual throughput may vary due to CF
memory card and computer configuration.
Serial # Sticker
For future product return or exchange, this serial # is
required. Please keep it for your reference.
2
System Requirements
• PC or Mac notebook computer with an available
ExpressCard slot
• Windows®2000/XP (32-/64-bit)/Server 2003
(32-/64-bit)/Vista (32-/64-bit)
• Mac OS X 10.5.x or later
PackageContents
•Hi-Speed ExpressCard CF R/W
• Driver CD
• Quick installation guide
Layout
Figure 1. Hi-Speed ExpressCard CF R/W
LED (Red)
The LED will be powered on when a memory card is
inserted and it will flash when the memory card is
accessed.
CF Slot
ExpressCard Connector
LED
3
Hardware Installation
GeneralinstructionsforinstallingtheHi-Speed ExpressCard
CF R/W are provided below. Since the design of
computers vary, refer to your system’s reference manual
for further information, if needed.
1. InsertyourmemorycardintotheHi-SpeedExpressCard
CF R/W,then insertthe Hi-Speed ExpressCard CF R/W
into the ExpressCard slot of the computer with it's
ExpressCard Connector facing the slot. Push the
ExpressCard into the slot gently, yet firmly for a
solid connection.
Note: Some ExpressCard slots will click when the
ExpressCard is fully inserted into the slot.
2. If your system was powered off when you plugged
in the ExpressCard, turn it on and go to Driver
Installation on page 3. Otherwise, go directly to
Driver Installation on page 3.
Driver Installation
Insert the Hi-Speed ExpressCard CF R/W and your CF
memory card into the computer and Windows will
automatically install it's built in driver for it. However,
high-speed CF memory cards, when used in conjuction
with the driver from the CD, may return better
performance. To install this driver, follow the directions
for your OS version in the order that they appear.
Note: The Hi-Speed ExpressCard CF R/W along with
a memory card must be installed into the system
before you install the driver from the CD.
WindowsVista™
1. Insert a memory card into the Hi-Speed ExpressCard
CF R/W, then insert the adapter into the computer.
2. Insert the driver CD. Click Start.
3. In the Start Search box, type D:\setup.exe, press
Enter, click Continue. (Change D: to match your
CD-ROM drive letter)
4. Click Next, then click Install.
5. Click Finish to complete the installation.
Windows 2000/XP/Server 2003
1. Insert a memory card into the Hi-Speed ExpressCard
CF R/W, then insert the adapter into the computer.
2. Insert the driver CD. Click Start, Run.
3. Type D:\setup.exe, click OK. (Change D: to match
your CD-ROM drive letter)
4. Click Next, then click Install.
5. Click Finish thenrestart to completethe installation.
To Verify Windows Installation
1. Check in Device Manager for proper installation
For Windows Vista: Right click Computer, click
Manage, click Continue.
For Windows 2000/XP/Server 2003: Right click My
Computer, click Manage.
2. Click Device Manager:
For Windows 2000/Vista: Double click Memory
technology driver.
For Windows XP/Server 2003: Double click PCMCIA
and Flash memory devices.
3. ExpressCard CF Adapter should be listed.
5
Mac OS X
Mac OS X will automatically detect and install the correct
driver for the Hi-Speed ExpressCard CF R/W. No driver
installation is needed.
Inserting CF Memory Card
CompactFlash memory cards are keyed for proper
insertion into the card reader with minimum
pressure. Make sure the CompactFlash label is facing up
when inserted.
Accessing CF Memory Card
For Windows
When the reader/writer is successfully installed, a
Removable Disk icon will appear in My Computer
(Computer forVista). To access the memory card,double
click the disk icon.
For Mac OS
When a CF memory card is inserted, a disk icon will
appear on the Mac desktop. To access the memory card,
double click the disk icon.
Removing CF Memory Card
For Windows
CF memory cards can be removed at any time. However,
make sure that the LED does not blinkfor several seconds
before removing it.
For Mac OS
Drag the disk icon into the Trashcan. Wait for the icon to
disappear from the desktop, then remove the memory
card from the reader writer.
6
Ejecting the ExpressCard
Not following the steps below could lead to system
crashes, data corruption or data loss.
For Windows 2000
1. Click the Unplug or Eject Hardware icon located
in the taskbar by the system clock.
2. Click Stop JMCR CF SCSI Disk Device...
3. At the Safe To Remove Hardware box, click OK.
The Hi-Speed ExpressCard CF R/W can be ejected.
For Windows XP/Server 2003/Vista
1. Click the Safely Remove Hardware icon located
in the taskbar by the system clock.
2. ClickSafelyRemoveJMCRCFSCSIDiskDevice....
3. When Safe to Remove Hardware box pops up, the
Hi-Speed ExpressCard CF R/W can be ejected.
For Mac OS X
1. Drag the disk icon into the Trashcan. Wait for the
icon to disappear from the desktop.
2. The Hi-Speed ExpressCard CF R/W can be ejected.
7
Technical Support and Warranty
QUESTIONS? SIIG’sOnline Support hasanswers! Simplyvisit our
web site at www.siig.com and click Support. Our online support
database is updated daily with new drivers and solutions. Answers
toyourquestionscould be just a few clicks away. You can also submit
questions online and a technical support analysts will promptly
respond.
SIIGoffers a 5-year manufacturer warrantywith this product. Please
see our web site for more warranty details. If you encounter any
problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the
product to the store where you purchased from.
B) Ifyourpurchase has passed the store's return policy period, please
follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. If the product is determined to be
defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
•Properly pack the product for shipping. All software, cable(s)
and any other accessories that came with the original package
must be included.
•Clearly write your RMA number on the top of the returned
package. SIIG will refuse to accept any shipping package, and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
•You are responsible for the cost of shipping. Ship the product
to the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
•SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
Hi-Speed ExpressCard CF R/W is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarksofSIIG,Inc. Microsoft,WindowsandWindowsVistaareeitherregisteredtrademarksor
trademarksofMicrosoftCorporationinthe UnitedStatesand/orother countries. MacandMacOS are
registeredtrademarksofAppleComputer,Inc. Othernamesusedinthispublicationareforidentification
onlyand may betrademarks of theirrespective companies.
May, 2008 Copyright ©2008 by SIIG, Inc. All rights reserved.
About SIIG, Inc.
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer
of I/O connectivity products, including PCIe, PCI & ISA serial and
parallel ports, USB, Serial ATA & UltraATA controllers, FireWire
(1394a/b),networking,sound cards, and other accessories. SIIGisthe
premier one-stop source of upgrades.
SIIGproductsoffer comprehensive usermanuals,manyuser-friendly
features, and are backed by an extensive manufacturer warranty.
High-quality control standards are evident by the overall ease of
installation and compatibility of our products, as well as one of the
lowest defective return rates in the industry. SIIG products can be
found in computer retail stores, mail order catalogs, through major
distributors, system integrators, and VARs in the Americas and the
UK, and through e-commerce sites.
PRODUCT NAME
Hi-SpeedExpressCardCFR/W
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Tabla de contenidos
Otros manuales de Hardware de computadora de SIIG
SIIG
SIIG ExpressCard/54 CF R/W Manual de usuario
SIIG
SIIG JJ-E01111-S1 Manual de usuario
SIIG
SIIG Parallel Pro Manual de usuario
SIIG
SIIG 1-Port ECP Manual de usuario
SIIG
SIIG SoundWave 5.1 PCI-LP Manual de usuario
SIIG
SIIG CyberSerial POS 4000RJ Manual de usuario
SIIG
SIIG SIIG 2-Port Serial 950-Value Manual de usuario
SIIG
SIIG UltraATA 100 Pro Manual de usuario
SIIG
SIIG SC-SAEE12-S1 Manual de usuario
SIIG
SIIG I/O Expander 2S Manual de usuario
SIIG
SIIG 1394 Dual-Port CardBus Manual de usuario
SIIG
SIIG NN-000032-S1 Manual de usuario
SIIG
SIIG SC-SAE612-S1 Manual de usuario
SIIG
SIIG SC-SB6412 Manual de usuario
SIIG
SIIG SATA II PCIe RAID Manual de usuario
SIIG
SIIG NN-8CB212-S1 Manual de usuario
SIIG
SIIG NN-PCMM12-S3 Manual de usuario
SIIG
SIIG CyberParallel ExpressCard Manual de usuario
SIIG
SIIG JJ-PCM012-S2 Manual de usuario
SIIG
SIIG ID-P40411-S1 Manual de usuario
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
