SIIG USB 3.0 to DisplayPort Adapter Manual de usuario

USB 3.0 to DisplayPort

Adapter

Quick Installation Guide

04-0828B

Introduction

The USB 3.0 to DisplayPort Adapter adds a

DisplayPort port to your USB 3.0 enabled system.

Key Features and Benefits

• Compliant with Universal Serial Bus 3.0

Specification

•Supports high resolution up to 1080p (Full

HD) & 2560 x 1600 (WQXGA)

• Connect up to 6 adapters per system

• Display modes: Primary, Extended & Mirror

• Supports 5.1-Channel audio

Serial Number Sticker

For future product return or exchange, this serial

number is required. Please keep it for your

reference.

System Requirements

• Desktop or notebook PC with an available

USB 2.0/3.0 port (USB 3.0 recommended)

• Windows®8 (32-/64-bit) / 7 (32-/64-bit) /

Vista (32-/64-bit) / XP SP3 (32-bit)

Package Contents

•USB 3.0 to DisplayPort Adapter

• USB Cable (Type A to Micro-B)

• Driver CD

• Quick installation guide

Layout

Figure 1: Layout

USB 3.0 Micro-B

connector

DisplayPort

connector

Software Installation

Make sure the proper version driver for your

graphics card is installed, the USB 3.0 to

DisplayPort Adapter is not designed to work with

Windows' Standard VGA Graphics Adapter

driver.

Important: Do not plug the adapter into the

computer until instructed to do so.

Windows 8 (32-/64-bit) / 7 (32-/64-bit)

1. Insert the driver CD. Close the CD AutoPlay

box.

2. Click Start, in the Search programs and

files box, type D:\setup.exe, press Enter.

Or press Windows key and R, type

D:\setup.exe in the Run window, and click

OK. (Change D: to match your CD/DVD-

ROM drive letter)

3. At the User Account Control, click Yes.

4. Select I Accept.

5. Connect your second monitor to the adapter

and turn it on.

6. Plug the adapter into the computer and the

driver will be installed automatically.

7. Restart your system to complete the

installation.

Windows Vista (32-/64-bit)

1. Insert the driver CD. Close CD autoplay

box if prompted.

2. Click Start, in the Start Search box, type

D:\setup.exe, press Enter.(Change D: to

match your CD/DVD-ROM drive letter)

3. Click Allow, and select I Accept.

4 Connect your second monitor to the adapter

and turn it on.

5. Plug the adapter into the computer and the

driver will be installed automatically.

6. Restart your system to complete the

installation.

Windows XP (32-bit)

1. Insert the driver CD. Click Start, Run, type

D:\setup.exe, then click OK. (Change D:

to match your CD/DVD-ROM drive letter)

2. Select I Accept.

3. Connect your second monitor to the adapter

and turn it on.

4. Plug the adapter into the computer and the

driver will be installed automatically.

5. Restart your system to complete the

installation.

To Verify Windows Installation

1. Go to Device Manager to verify installation.

For Windows 8 / 7 / XP: Right click Computer

or My Computer, click Manage, then click

Device Manager.

For Windows Vista: Right click Computer,

click Manage, click Continue, then click

Device Manager.

2. Double click USB Display Adapters.

DisplayLink Display Adapter (4301) and

UHD-100DP should be displayed.

Display Configuration

After successful driver installation, a display

utility icon will appear in the taskbar by the

system clock.

Note: The icon may be hidden in the Windows

System Tray. Click the arrow icon to bring it

up.

Selectable Viewing Modes

Access the utility by clicking the utility icon ,

and click UHD-100 DP.

Figure 2: Utility Settings

•Screen Resolution: Click to select an

available resolution. Note: This function is

disabled in mirror mode, as the resolution is

defined by the resolution of the primary

monitor.

•Screen Rotation: Rotates the screen

according to the desired orientation.

•Extend To: Extends the screen according to

the desired orientation.

•Extend: This is the default setting of the

USB 3.0 to DisplayPort Adapter. This mode

extends your desktop for easy viewing of

multiple windows. The window will move

off the primary display from the right side

and enter the extended display from the left

side.

•Set as Main Monitor: Set this extended

screen as the main screen.

IMPORTANT: In Windows XP, set the

USB 3.0 to DisplayPort Adapter to Off

before selecting Set as Main Monitor.

•Mirror: Duplicates the primary monitor to

the monitor which connects with the USB

3.0 to DisplayPort Adapter.

• Off: Turns off the USB 3.0 to DisplayPort

Adapter.

• Optimize for Video (not available in

Windows XP): Optimize the video quality

when playing back. Text may appear less

clear when enabling.

• Fit to TV: Adjust the size of the desktop on

the TV. Note: This function works only

when one display is connected.

Multi-Monitor Configuration

Theadd-onmonitorscanbeconfiguredbyclicking

the utility icon and selecting DisplayLink

Manager or Video Setup. The configuration

page can also be opened using the steps below.

Position the mouse anywhere on the desktop:

1. For Windows 8 / 7: Right click then select

Screen resolution.

2. For Windows Vista: Right click then select

Personalize, then click Display Settings.

3. For Windows XP: Right click, select

Properties, then select Settings tab.

Extended Mode

1. Refer to the Multi-Monitor Configuration

on page 8 to open the configuration page.

2. In the Display drop-down menu, select the

preferred monitor.

For Windows 8 / 7: In the Multiple displays

drop-down menu, select Extend desktop

to this display.

For Windows Vista: Check the Extend the

desktop onto this monitor box.

For Windows XP: Check the Extend my

Windows desktop onto this monitor box.

3. Click OK to confirm and close the settings

screen.

4. Once the setting is completed, simply drag

and drop the application icons or the opened

window, in restore down mode, to the add

on monitor. However, some applications

may not support the extended desktop.

Mirror Mode

1. Refer to the Multi-Monitor Configuration

on page 8 to open the configuration page.

2. In the Display drop-down menu, select the

preferred monitor.

For Windows 8 / 7: Check Multiple displays,

select Duplicate these displays.

For Windows Vista: Uncheck the Extend the

desktop onto this monitor box.

For Windows XP: Uncheck the Extend my

Windows desktop onto this monitor box.

3. Click OK to confirm and close the settings

screen.

Figure 3: Monitor Orientation

Tabla de contenidos

Otros manuales de Adaptador de SIIG

SIIG

SIIG JU-H30612-S1 Hoja de información del producto

SIIG

SIIG SATA-to-IDE Adapter Manual de usuario

SIIG

SIIG Universal DC Power Adapter - 90W Manual de usuario

SIIG

SIIG RS232 Serial Manual de usuario

SIIG

SIIG USB 3.0 to SATA 6Gb/s Adapter Manual de usuario

SIIG

SIIG Wireless-N Mini USB Wi-Fi Adapter Manual de usuario

SIIG

SIIG CyberParallel Dual PCIe Manual de usuario

SIIG

SIIG 2-Port USB to RS-232 Serial Adapter Manual de usuario

SIIG

SIIG USB 2.0 to VGA Pro Manual de usuario

SIIG

SIIG JU-NE0211-S1 Manual de usuario

SIIG

SIIG CE-HM0021-S1 Manual de usuario

SIIG

SIIG NN26 Series Manual de usuario

SIIG

SIIG SATA-to-IDE Adapter Manual de usuario

SIIG

SIIG JU-VG0311-S1 Manual de usuario

SIIG

SIIG CyberParallel PCIe Manual de usuario

SIIG

SIIG JJ-P20511-S3 Manual de usuario

SIIG

SIIG US2253 Manual de usuario

SIIG

SIIG M1 Manual de usuario

SIIG

SIIG JU-AV0012-S1 Manual de usuario

SIIG

SIIG USB to RS-422/485 Serial Adapter Manual de usuario

SIIG

SIIG JU-NE0411-S1 Manual de usuario

SIIG

SIIG CB-TC0611-S1 Hoja de información del producto

SIIG

SIIG SATA-to-IDE Adapter Manual de usuario

SIIG

SIIG CN2502 Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario