SIIG CN2502 Manual de usuario
1
SerialATA-to-UltraATAAdapter
Quick Installation Guide
04-0261C
Features and Benefits
• Allows you to connect an existing Ultra ATA 133/100/66 hard
disk drive to a Serial ATA controller of any brand and
supports data rates up to 133 MB/s
• Use this adapter with a SIIG Serial ATA controller to maximize
device support
• Compliant with Serial ATA specification, revision 1.0
• Works with any Serial ATA-enabled system
• Plugs into the 40-pin connector of an Ultra ATA hard disk drive.
NoPCIslotisrequired.
System Requirements
• Serial ATA-enabled Pentium or equivalent PC with an available
SerialATAport
• Windows 98/98SE/ME/NT 4.0/2000/XP
Package Contents
• (1)SerialATA-to-Ultra ATAAdapter
• (1) Serial ATA cable
• (1) "Y" split power cable
• This quick installation guide
Anti-Static Precaution
StaticElectricityDischargemaypermanentlydamageyoursystem.To
avoid possible static electricity discharge during the installation,
pleasefollowtheguidelines below:
•Discharge any static electricity build up in your body by
touching a large grounded metal surface or the computer’s case
(ifplugged in), for a few seconds.
•During the installation, avoid any contact with internal parts.
Handle cards only by their external edges.
2
Device Connection
Before you start, turn OFF your computer and any other connected
peripheral devices. Unplug the computer's power cord.
For best results, make sure the driver for your existing Serial ATA
controller is properly installed.
1. Connect the Serial ATA cable and the mini-size power cable
to the Serial ATA-to-Ultra ATA Adapter.
Note: For your convenience, a "Y" split power cable is included.
You don't have to use it if your system has a mini-size power
connector available.
Figure 2. Connecting to Ultra ATA hard disk drive
3. Attach the other end of the Serial ATA cable to your existing
Serial ATA controller. Installation is now complete.
2. ConnecttheSerialATA-to-UltraATA Adapterto theUltraATA
hard disk drive. Make sure pin 1 of the adapter matches pin 1
on the hard disk drive.
Note: Make sure the UltraATA hard disk drive has its own
power.
IDE Pin 1
Figure 1. Serial ATA-to Ultra ATA Adapter *
40-pin IDE Connector
*Productmay
varyslightly from
thisphoto
Serial ATA cable
Power Cable
IDE Pin 1
3
Technical Support
QUESTIONS? SIIG’s Online Support has the answers!
Simply visit our Web site at www.siig.com and click on
Support. Our online support database is updated daily with
new drivers and solutions. The answers to your problems
could be just a few clicks away.
If you can't find answers or solutions to your questions, you
have an option to submit the problems online to one of our
technical support analysts and we will promptly respond to
you with answers or solutions.
The5-yearmanufacturerwarrantysuppliedwiththisproduct
is offered by SIIG, Inc. If you should happen to encounter
anyproblemswiththisproduct,pleasefollowtheprocedures
below.
1. If it is within the store's return policy period, please
return the product to the store where you purchased
from.
2. If your purchase has passed the store's return policy
period, please contact SIIG. See SIIG's Limited 5-year
Warranty card for more information.
Online Store
SIIGoffersallofourproductsonlineatourcompanystore. Visit
us at http://onlinestore.siig.com to find our complete line of
products, including hard to find items and accessories (power
adapters,cables,upgradekits,etc.).
SerialATA+Ultra ATA Adapter isa trademark ofSIIG, Inc.
SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are
registeredtrademarksofMicrosoftCorporation. PentiumisaregisteredtrademarkofIntelCorporation.
Othernamesusedinpublicationareforidentificationonlyandmaybetrademarksoftheirrespective
companies.
March, 2004 Copyright © 2004 by SIIG, Inc. All rights reserved.
PRODUCT NAME MODEL NUMBER
Serial ATA+Ultra ATAAdapter CN2502
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR
PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Ave.
Fremont, CA 94538-3152
About SIIG, Inc.
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer
ofI/Oconnectivityproducts,includingPCI&ISAserialandparallel
ports,USB,SerialATA&UltraATAcontrollers,FireWire(1394a/b),
Networking,SoundCards,andotheraccessories. SIIGisthepremier
one-stopsourceofupgrades.
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendly
features, and all products are backed by a 5-year manufacturer
warranty. High-qualitycontrolstandardsareevidentbytheoverall
easeof installationandcompatibility ofour products,aswell asone
ofthelowestdefectivereturnratesintheindustry. SIIGproductscan
be found in most computer retail stores, mail order catalogs, and e-
commercesitesintheAmericasandtheUK,aswellasthroughmajor
distributors,systemintegrators,andVARs.
Tabla de contenidos
Otros manuales de Adaptador de SIIG
SIIG
SIIG PCIe to ExpressCard Adapter Manual de usuario
SIIG
SIIG CE-AD0012-S1 Manual de usuario
SIIG
SIIG RS-422 Manual de usuario
SIIG
SIIG USB 2.0 to VGA Pro Manual de usuario
SIIG
SIIG JU-H30612-S1 Hoja de información del producto
SIIG
SIIG RS232 Serial Manual de usuario
SIIG
SIIG SATA-to-IDE Adapter Manual de usuario
SIIG
SIIG JU-H20511-S1 Manual de usuario
SIIG
SIIG JU-NE0711-S1 Hoja de información del producto
SIIG
SIIG JU-HM0112-S1 Manual de usuario
SIIG
SIIG CE-HM0021-S1 Manual de usuario
SIIG
SIIG CE-H23R11-S1 Manual de usuario
SIIG
SIIG M1 Manual de usuario
SIIG
SIIG PCI Express Serial Manual de usuario
SIIG
SIIG Wireless-N Mini USB Wi-Fi Adapter Manual de usuario
SIIG
SIIG JU-DV0211-S1 Manual de usuario
SIIG
SIIG NN26 Series Manual de usuario
SIIG
SIIG USB 3.0 to SATA 6Gb/s Adapter Manual de usuario
SIIG
SIIG Cool Dual SATA to USB 2.0 Docking Manual de usuario
SIIG
SIIG JU-VG0311-S1 Manual de usuario
