SIGMA TEK SDM 081 Manual de usuario

SDM 081

S-DIAS Safety

Digital Mixed Module

Instruction Manual

Date of creation: 12.05.2014

Version date: 05.12.2023

Article number: 20-895-081-E

Publisher: SIGMATEK GmbH & Co KG

A-5112 Lamprechtshausen

Tel.: +43/6274/4321

Fax: +43/6274/4321-18

Email: [email protected]

WWW.SIGMATEK-AUTOMATION.COM

SIGMATEK GmbH & Co KG

Translation of the Original Instruction

distributed in any form (print, photocopy, microfilm or in any other process) without the express permission.

We reserve the right to make changes in the content without notice. The SIGMATEK GmbH & Co KG is not responsible

for technical or printing errors in the handbook and assumes no responsibility for damages that occur through use

of this handbook.

S-DIAS SAFETY DIGITAL MIXED MODULE SDM 081

05.12.2023 Page 1

S-DIAS Safety Digital Mixed Module SDM 081

The S-DIAS Safety SDM 081 digital mixed module has the safety integrity level

SIL3 in accordance with EN IEC 62061 or Performancelevel e (PL e) in

accordance with EN ISO 13849.

The SDM 081 has:

•2 Safe +24 V outputs with a maximum of 2 A per output

(EN 61131-2; EN IEC 62061 und EN ISO 13849)

•6 Safe +24 V DC/0.5 ms inputs (EN 61131-2; EN IEC 62061 und

EN ISO 13849)

•Redundant output signal (short-circuit proof)

The safe outputs are used for the safety-oriented output of two actuator

signals to, for example, control relays, valves, etc.

The safety inputs are used for reading six actuator signals (Emergency Stop,

confirmation button etc.). To test inputs and detect cross circuits (e.g.

Emergency Stop), the SDM 081 has two non-safe signal outputs, A and B.

The safety-related SDM 081 is ideal for use in systems with optional

modules and interface variables according to Safety System Handbook, see

homepage

To use the Safety digital input module in an application, the SDM 081 also

requires a Safety CPU module that regulates the synchronized communication with the safety

modules using safe bus telegrams. This also includes

•processing the safe application and

•the distribution of configuration data to remote safety modules.

Using the search function with the keyword “Safety System Handbook”

SDM 081 S-DIAS SAFETY DIGITAL MIXED MODULE 
 
Page 2 05.12.2023 
Contents 
1Introduction............................................................................. 5 
1 Target Group/Purpose of this Operating Manual......................5 
2 Important Reference Documentation .........................................5 
3 Contents of Delivery.....................................................................5 
2Basic Safety Guidelines......................................................... 6 
1 Symbols Used...............................................................................6 
2 Disclaimer......................................................................................8 
3 General Safety Directives ............................................................9 
4 Designated Use...........................................................................11 
5 Software/Training .......................................................................12 
3Standards and Directives......................................................13 
1 Residual Risks ............................................................................13 
2 Safety of the Machine or Equipment ........................................13 
3 Directives.....................................................................................13 
3.1 Functional Safety Standards..............................................................14 
3.2 EU Conformity Declaration................................................................14 
4 Safety-Relevant Parameters......................................................15 
4.1 Mounting Position Horizontal 0-55 °C Ambient Temperature ............15 
4.2 Mounting Position Horizontal 0-60 °C Ambient Temperature ............16 
5 Compatibility...............................................................................18 
4Type Plate...............................................................................19 

 S-DIAS SAFETY DIGITAL MIXED MODULE SDM 081 
 
12.2023 Page 3 
5Technical Data.......................................................................20 
1 Input Specifications....................................................................20 
2 Specifications for Cross-Circuit Detection Signal Outputs ...21 
3 Input Circuit.................................................................................21 
4 Output Specifications.................................................................22 
4.1 Maximum Inductive Load L (mH) at Load Current I (A)..................... 23 
4.2 Maximum Capacitive Load C (µF) at Load Current I (A)................... 24 
5 Output Circuit..............................................................................25 
6 Electrical Requirements.............................................................25 
7 Miscellaneous .............................................................................27 
8 Environmental Conditions.........................................................27 
6Mechanical Dimensions........................................................28 
7Connector Layout..................................................................29 
1 Status LEDs.................................................................................30 
2 Applicable Connectors...............................................................30 
3 Label Field...................................................................................31 
8Wiring.....................................................................................32 
1 Wiring Example...........................................................................32 
2 Note..............................................................................................33 
9Assembly/Installation ...........................................................34 
1 Check Contents of Delivery.......................................................34 
2 Mounting......................................................................................35 

SDM 081 S-DIAS SAFETY DIGITAL MIXED MODULE

Page 4 05.12.2023

10 Transport/Storage..................................................................37

11 Storage ...................................................................................37

12 Maintenance...........................................................................38

12.1 Service.........................................................................................38

12.2 Repair...........................................................................................38

13 Disposal..................................................................................38

S-DIAS SAFETY DIGITAL MIXED MODULE SDM 081

05.12.2023 Page 5

1 Introduction

1.1 Target Group/Purpose of this Operating Manual

This operating manual contains all information required for the operation of the product.

This operating manual is intended for:

•Project planners

•Technicians

•Commissioning engineers

•Machine operators

•Maintenance/test technicians

General knowledge of automation technology is required.

Further help and training information, as well as the appropriate accessories can be found on

our website www.sigmatek-automation.com.

Our support team is happily available to answer your questions.

Please see our website for our hotline number and business hours.

1.2 Important Reference Documentation

•Safety System Handbook

This and additional documents can be downloaded from our website or obtained through

support.

1.3 Contents of Delivery

1x SDM 081

SDM 081 S-DIAS SAFETY DIGITAL MIXED MODULE

Page 6 05.12.2023

2 Basic Safety Guidelines

2.1 Symbols Used

The following symbols are used in the operator documentation for warning and danger

messages, as well as informational notes:

DANGER

Danger indicates that death or serious injury will occur, if the specified

measures are not taken.

To avoid death or serious injuries, observe all guidelines.

Danger indique une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

WARNING

Warning indicates that death or serious injury can occur, if the specified

measures are not taken.

To avoid death or serious injuries, observe all guidelines.

Avertissement d’une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

CAUTION

Caution indicates that moderate to slight injury can occur, if the

specified measures are not taken.

To avoid moderate to slight injuries, observe all guidelines.

Attention indique une situation dangereuse qui, faute de prendre les

mesures adéquates, peut entraîner des blessures assez graves ou

légères.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

S-DIAS SAFETY DIGITAL MIXED MODULE SDM 081

05.12.2023 Page 7

CAUTION

Danger for ESD-sensitive components.

Les signes de danger pour les composants sensibles aux décharges

électrostatiques.

INFORMATION

Information

Provides important information on the product, handling or

relevant sections of the documentation, which require

attention.

SDM 081 S-DIAS SAFETY DIGITAL MIXED MODULE

Page 8 05.12.2023

2.2 Disclaimer

INFORMATION

The contents of this operating manual were prepared with the greatest

care. However, deviations cannot be ruled out. This operating manual

is regularly checked and required corrections are included in the

subsequent versions. The machine manufacturer is responsible for the

proper assembly, as well as device configuration. The machine

operator is responsible for safe handling, as well as proper operation.

The current operating manual can be found on our website. If

necessary, contact our support.

Subject to technical changes, which improve the performance of the

devices. The following operating manual is purely a product

description. It does not guarantee properties under the warranty.

Please thoroughly read the corresponding documents and this

operating manual before handling a product.

SIGMATEK GmbH & Co KG is not liable for damages caused

through, non-compliance with these instructions or applicable

regulations.

Otros manuales para SDM 081

Tabla de contenidos

Otros manuales de Unidad de control de SIGMA TEK

SIGMA TEK

SIGMA TEK AO 046 Manual de usuario

SIGMA TEK

SIGMA TEK DM 167 Manual de usuario

SIGMA TEK

SIGMA TEK HZS 7321 Manual de usuario

SIGMA TEK

SIGMA TEK TO 161 Manual de usuario

SIGMA TEK

SIGMA TEK S-DIAS EC 121 Manual de usuario

SIGMA TEK

SIGMA TEK DC 061-1 Manual de usuario

SIGMA TEK

SIGMA TEK MDP 102-1 Manual de usuario

SIGMA TEK

SIGMA TEK SCP 011 Manual de usuario

SIGMA TEK

SIGMA TEK CP 112-1 Manual de usuario

SIGMA TEK

SIGMA TEK PIM 041-W Manual de usuario

SIGMA TEK

SIGMA TEK SCP 111 Manual de usuario

SIGMA TEK

SIGMA TEK EZ 101 Manual de usuario

SIGMA TEK

SIGMA TEK CP 112 Manual de usuario

SIGMA TEK

SIGMA TEK MDD 111-2 Manual de usuario

SIGMA TEK

SIGMA TEK KL 090 Manual de usuario

SIGMA TEK

SIGMA TEK C-DIAS Manual de usuario

SIGMA TEK

SIGMA TEK STO 081 Manual de usuario

SIGMA TEK

SIGMA TEK NC 100 Manual de usuario

SIGMA TEK

SIGMA TEK PIM 021 Manual de usuario

SIGMA TEK

SIGMA TEK CP 102 Manual de usuario

SIGMA TEK

SIGMA TEK AI 0812 Manual de usuario

SIGMA TEK

SIGMA TEK SCP 111-2 Manual de usuario

SIGMA TEK

SIGMA TEK KL 181 Manual de usuario

SIGMA TEK

SIGMA TEK CCP 531 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario