SIGMA TEK SCP 111 Manual de usuario

SCP 111

S-DIAS Safety CPU Module

Instruction Manual

Date of creation: 20.05.2015

Version date: 05.12.2023

Article number: 20-890-111-E

Publisher: SIGMATEK GmbH & Co KG

A-5112 Lamprechtshausen

Tel.: +43/6274/4321

Fax: +43/6274/4321-18

Email: [email protected]

WWW.SIGMATEK-AUTOMATION.COM

SIGMATEK GmbH & Co KG

Translation of the Original Instruction

distributed in any form (print, photocopy, microfilm or in any other process) without the express permission.

We reserve the right to make changes in the content without notice. The SIGMATEK GmbH & Co KG is not responsible

for technical or printing errors in the handbook and assumes no responsibility for damages that occur through use

of this handbook.

S-DIAS SAFETY CPU MODULE SCP 111

05.12.2023 Page 1

S-DIAS Safety CPU Module SCP 111

The S-DIAS Safety CPU module supports up to 16 Safe IO modules. In

addition, the SCP 111 can operate handheld devices with Emergency Stop

and/or confirmation buttons.

The Safety CPU component has the safety integrity level SIL3 (EN IEC

62061) or Performancelevel e (PL e) (EN ISO 13849).

The safety-related SCP 111 is ideal for use in systems with optional

modules and interface variables according to Safety System Handbook,

see homepage

With the SCP 111, Safe process data is transmitted with its own safety

protocol (FSoE). Therefore, the SCP 111 cannot be used with a CSCP

011/012, SCP 010/011 in a Safety project.

The SCP 111 alone is already a minimal system of a safety control.

In addition, the Safety SCP 111 regulates the synchronized communication

with the remote safety modules through safe bus telegrams. Included

among their jobs are:

•Processing the safe application and

•The distribution of configuration data to remote safety modules

SCP 111-X: main board and S-DIAS connectors coated in Purocoat (Certonal)

Using the search function with the keyword “Safety System Handbook”

SCP 111 S-DIAS SAFETY CPU MODULE 
 
Page 2 05.12.2023 
Contents 
1Introduction............................................................................. 6 
1 Target Group/Purpose of this Operating Manual......................6 
2 Important Reference Documentation .........................................6 
3 Contents of Delivery.....................................................................6 
2Basic Safety Guidelines......................................................... 7 
1 Symbols Used...............................................................................7 
2 Disclaimer......................................................................................9 
3 General Safety Directives ..........................................................10 
4 Designated Use...........................................................................12 
5 Software/Training .......................................................................13 
3IT Security ..............................................................................14 
4Standards and Directives......................................................15 
1 Residual Risks ............................................................................15 
2 Safety of the Machine or Equipment ........................................15 
3 Directives.....................................................................................15 
3.1 Functional Safety Standards..............................................................16 
3.2 EU Conformity Declaration................................................................16 
4 Safety-Relevant Parameters......................................................17 
4.1 Mounting Position Horizontal 0-55 °C Ambient Temperature ............17 
4.2 Mounting Position Horizontal 55-60 °C Ambient Temperature ..........17 
5 Compatibility...............................................................................18 

 S-DIAS SAFETY CPU MODULE SCP 111 
 
12.2023 Page 3 
5Type Plate ..............................................................................19 
6Technical Data.......................................................................20 
1 Performance Data.......................................................................20 
2 Electrical Requirements.............................................................21 
2.1 Module Supply (Input)....................................................................... 21 
2.2 S-DIAS Bus/Safety Supply (Output).................................................. 22 
3 Miscellaneous .............................................................................24 
4 Environmental Conditions.........................................................24 
7Mechanical Dimensions........................................................25 
8Connector Layout..................................................................26 
1 Status LEDs.................................................................................27 
2 Applicable Connectors...............................................................28 
3 Label Field...................................................................................29 
9Validation Button...................................................................30 
1 Explanation of the Individual Sequences.................................30 
1.1 Start Sequence................................................................................. 30 
1.2 Command Selection Sequence......................................................... 31 
1.3 End Sequence .................................................................................. 31 
1.4 Error Sequence................................................................................. 31 
2 Overview of Commands.............................................................32 
3 Overview of Module Status and Commands............................32 
4 Handling the microSD Card (mSD) ...........................................34 

SCP 111 S-DIAS SAFETY CPU MODULE 
 
Page 4 05.12.2023 
5 Configuring a Safety CPU with the mSD Card.........................35 
Error Response......................................................................36 
1 Restart Errors..............................................................................36 
2 Configuration Distribution Error...............................................37 
3 Troubleshooting .........................................................................38 
4 Troubleshooting with the SafetyDesigner ...............................38 
5 Correcting a Wiring Error...........................................................38 
Wiring Guidelines ..................................................................39 
1 Shielding......................................................................................40 
2 ESD Protection............................................................................40 
Assembly/Installation............................................................41 
1 Check Contents of Delivery.......................................................41 
2 Mounting......................................................................................42 
Supported Cycle Times.........................................................44 
1 Cycle Times below 1 ms (in µs).................................................44 
2 Cycle Times equal to or higher than 1 ms (in ms)...................44 
Transport/Storage..................................................................45 
Storage ...................................................................................45 
Maintenance...........................................................................46 
1 Service.........................................................................................46 
2 Repair...........................................................................................46 

S-DIAS SAFETY CPU MODULE SCP 111

05.12.2023 Page 5

17 Disposal .................................................................................46

SCP 111 S-DIAS SAFETY CPU MODULE

Page 6 05.12.2023

1 Introduction

1.1 Target Group/Purpose of this Operating Manual

This operating manual contains all information required for the operation of the product.

This operating manual is intended for:

•Project planners

•Technicians

•Commissioning engineers

•Machine operators

•Maintenance/test technicians

General knowledge of automation technology is required.

Further help and training information, as well as the appropriate accessories can be found on

our website www.sigmatek-automation.com.

Our support team is happily available to answer your questions.

Please see our website for our hotline number and business hours.

1.2 Important Reference Documentation

•Safety System Handbook

This and additional documents can be downloaded from our website or obtained through

support.

1.3 Contents of Delivery

1x SCP 111

S-DIAS SAFETY CPU MODULE SCP 111

05.12.2023 Page 7

2 Basic Safety Guidelines

2.1 Symbols Used

The following symbols are used in the operator documentation for warning and danger

messages, as well as informational notes:

DANGER

Danger indicates that death or serious injury will occur, if the specified

measures are not taken.

To avoid death or serious injuries, observe all guidelines.

Danger indique une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

WARNING

Warning indicates that death or serious injury can occur, if the specified

measures are not taken.

To avoid death or serious injuries, observe all guidelines.

Avertissement d’une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

CAUTION

Caution indicates that moderate to slight injury can occur, if the

specified measures are not taken.

To avoid moderate to slight injuries, observe all guidelines.

Attention indique une situation dangereuse qui, faute de prendre les

mesures adéquates, peut entraîner des blessures assez graves ou

légères.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

SCP 111 S-DIAS SAFETY CPU MODULE

Page 8 05.12.2023

CAUTION

Danger for ESD-sensitive components.

Les signes de danger pour les composants sensibles aux décharges

électrostatiques.

INFORMATION

Information

Provides important information on the product, handling or

relevant sections of the documentation, which require

attention.

Otros manuales para SCP 111

Tabla de contenidos

Otros manuales de Unidad de control de SIGMA TEK

SIGMA TEK

SIGMA TEK NC 100 Manual de usuario

SIGMA TEK

SIGMA TEK EZ 101 Manual de usuario

SIGMA TEK

SIGMA TEK DIAS-Drive 2000 Manual de usuario

SIGMA TEK

SIGMA TEK HMI-Link G2 Device Manual de usuario

SIGMA TEK

SIGMA TEK S-DIAS AI 022 Manual de usuario

SIGMA TEK

SIGMA TEK S-DIAS EC 121 Manual de usuario

SIGMA TEK

SIGMA TEK KL 181 Manual de usuario

SIGMA TEK

SIGMA TEK AM 441 Manual de usuario

SIGMA TEK

SIGMA TEK TO 161 Manual de usuario

SIGMA TEK

SIGMA TEK ST 011 Manual de usuario

SIGMA TEK

SIGMA TEK BL 011 Manual de usuario

SIGMA TEK

SIGMA TEK SCP 111-S Manual de usuario

SIGMA TEK

SIGMA TEK PIM 021 Manual de usuario

SIGMA TEK

SIGMA TEK SDM 081 Manual de usuario

SIGMA TEK

SIGMA TEK CCP 531 Manual de usuario

SIGMA TEK

SIGMA TEK KL 090 Manual de usuario

SIGMA TEK

SIGMA TEK SCP 111-2 Manual de usuario

SIGMA TEK

SIGMA TEK SRO 021 Manual de usuario

SIGMA TEK

SIGMA TEK MDP 102-1 Manual de usuario

SIGMA TEK

SIGMA TEK SCP 211 Manual de usuario

SIGMA TEK

SIGMA TEK S-DIAS DM 821 Manual de usuario

SIGMA TEK

SIGMA TEK SCP 111 Manual de usuario

SIGMA TEK

SIGMA TEK C-DIAS Manual de usuario

SIGMA TEK

SIGMA TEK SR 022 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario