Siemens SISTORE AX4 Manual de usuario

CCTV

SISTORE AX4

Quick Start Guide

Fire & Security Products

Siemens Building Technologies

Fire & Security Products

Preface

FCC statement of conformity

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

CE declaration of conformity

The device supplied with this Instruction Manual meets the requirements of the

European Directive 89/336/EWG (electromagnetic compatibility). Compliance with

this EC directive has been proven by testing according to the standards

EN 50130-4 (EN 61000-2, -3, -4, -5, -6 and -11) for noise immunity and EN 55022

Class A for emitted interference.

Siemens Building Technologies

Fire & Security Products

1 INSTALLATION

The SISTORE AX4 is designed to work a variety of other equipment. The basic system

will consist of a video camera and system monitor. Refer to the User’s Manual CD (see

directory: Documentation) for details of installing each type of equipment.

Figure 1: SISTORE AX4 Rear Panel

Step 1:

Video In: Connect cameras (up to 4) to camera BNC inputs. If looping is required,

connect camera out to second source (second BNC).

Step 2:

Video Out, SVHS Out and VGA Out: Connect a monitor to a composite video output for

multi-screen display and playback. Connect a monitor to SVHS output or connect an

RGB monitor to the VGA connector if needed.

Step 3:

Power Connector: Apply power to the unit.

Siemens Building Technologies

Fire & Security Products

2 OPERATION

2.1 Turning on the Power

The SISTORE AX4 is operational in approximately 60 seconds after the power cable is

connected to the system. The Power LED on the front panel will turn ON, and this

action signifies the system has been turned on properly. The SISTORE AX4 may be

powered down by unplugging the power cord at the rear of the system. No on/off switch

is provided.

Figure 2: SISTORE AX4 Front Panel

Display Modes

Press the desired camera number button to view the desired camera image, and press

the QUAD/SEQ button repeatedly to toggle between 2 x 2 screen and sequence display

modes.

Recording

Once you have installed the system following the instructions described in the User’s

Manual, it is ready to record. There is no recording button on the front panel to initiate

recording video. The SISTORE AX4 will start recording video according to the schedule

configured by the user and from external and internal events such as alarm input or

motion detection events.

2.2 Playback Commands

Press the Menu button in the playback mode to enable a menu-driven search function

(detailed further in User’s Manual).

Play and Fast Forwards: Press the button to play the images forward at

regular speed. Subsequent selection of the button toggles the / /

forward play speed.

Rewind and Fast Backwards: Press the button to play the images backward at

the regular speed. Subsequent selection of the button toggles the / /

backward play speed.

Pause: Press the button to stop playback and display the still image.

Next: Press the button after pressing the Pause button to move to the next

image.

Previous: Press the button after pressing the Pause button to move to the

previous image.

Siemens Building Technologies

Fire & Security Products

2.3 Front Panel Buttons and LEDs

2.3.1 Buttons

CAMERA (1-4) Displays corresponding camera image, and enters password.

QUAD/SEQ Switches between 2 x 2 screen mode and sequence mode. Also loads a

Preset View in the PTZ mode.

ARROW Moves the cursor in the setup dialog boxes, plays, fast forwards and

reviews in the playback mode, and Controls pan and tilt in the PTZ mode.

ENTER Selects an item in the setup dialog boxes, enters to or exits from edit

mode in the setup dialog boxes, and Pauses in the playback mode.

MENU Displays the menu dialog box, and displays the search menu in the

playback mode. Also loads the PTZ menu in the PTZ mode.

PTZ Opens a Pan/Tilt/Zoom screen which allows you to control properly

configured cameras

PANIC Activates panic recording, so the DVR will record video regardless of the

time-lapse or event recording schedule

2.3.2 LEDs

POWER Illuminates when the system is on.

NETWORK Illuminates when the system is networked either via Ethernet or modem.

BACKUP Illuminates when data is being backed up on the USB backup device.

CAMERA (1-4) Illuminates when corresponding camera image is displayed.

MENU Illuminates when the system is in the setup mode.

QUAD/SEQ Illuminates when the system is in the sequence mode.

PTZ Illuminates when the system is in the PTZ mode.

PANIC Illuminates when the system is in the panic recording mode.

Document No. A24205-A336-B604, Issue 09 / 04 © Copyright by

Siemens Building Technologies AG

2.4 System Setup

The front panel buttons are used to enter system commands and for programming.

Press MENU button on the front panel and enter the password (default: 4321) using

camera buttons (1-4). As well as the Normal Setup, the SISTORE AX4 also supports

the Quick Setup for system programming. The factory default is the Quick Setup. Refer

to User’s Manual for the setup instructions in detail.

Quick Setup Menu Normal Setup Menu

Otros manuales para SISTORE AX4

Tabla de contenidos

Otros manuales de Sistema de seguridad de Siemens

Siemens

Siemens FT2009-U1 Manual de usuario

Siemens

Siemens Cerberus PACE Manual de usuario

Siemens

Siemens FDM223-Ex Manual de usuario

Siemens

Siemens RB-6 L-801A Manual de usuario

Siemens

Siemens FDS221-W Manual de usuario

Siemens

Siemens PCA2005-A1 Manual de usuario

Siemens

Siemens MI291A Guía

Siemens

Siemens IC60 Manual de usuario

Siemens

Siemens MI290A Guía

Siemens

Siemens SPCY130 Manual de usuario

Siemens

Siemens 3SX3235 Manual de usuario

Siemens

Siemens IC60 Manual de usuario

Siemens

Siemens Codelock K44 Duo Manual de instrucciones

Siemens

Siemens CERBERUS PYROTRONICS ADB-3 Manual de usuario

Siemens

Siemens WAC 12 Manual de usuario

Siemens

Siemens FXS901 Manual de usuario

Siemens

Siemens SINAMICS S120 Manual de usuario

Siemens

Siemens FS20 Guía del usuario

Siemens

Siemens FDM273 Manual de usuario

Siemens

Siemens SIRIUS 8WD4420-0EA Manual de usuario

Siemens

Siemens FDM273-O Guía

Siemens

Siemens IMKW6-10 Manual de usuario

Siemens

Siemens FDS181C Manual de usuario

Siemens

Siemens Codoor CD3500 Manual de instrucciones

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

DSC

DSC PC 4010 Manual del propietario