Siemens FDM275 Guía

FDM275, FDM275(F)

Radio manual call point

Mounting

A6V10401114_f_en_--

Building Technologies

2018-11-19 Control Products and Systems

Imprint

2 | 18

Building Technologies

A6V10401114_f_en_

Fire Safety

2018

Imprint

Technical specifications and availability subject to change without notice.

Transmittal, reproduction, dissemination and/or editing of this document as well as

utilization of its contents and communication thereof to others without express

authorization are prohibited. Offenders will be held liable for payment of damages.

All rights created by patent grant or registration of a utility model or design patent

are reserved.

Issued by:

Siemens Switzerland Ltd.

Building Technologies Division

International Headquarters

Theilerstrasse 1a

CH-6300 Zug

Tel. +41 58 724-2424

www.siemens.com/buildingtechnologies

Edition: 2018-11-19

Document ID: A6V10401114_f_en_--

3 | 18

Building Technologies

A6V10401114_f_en_

Fire Safety

2018

Table of contents

1 About this document ............................................................................. 5

2 Mounting and installation....................................................................... 6

2.1 Mounting radio manual call point FDM275 .................................................. 6

2.2 Installation .................................................................................................. 7

2.3 Installing the protective cover...................................................................... 9

2.4 Replacing the plastic insert with a glass insert............................................10

3 Details for ordering ............................................................................. 11

3.1 Battery pack BAT3.6-10.............................................................................11

3.2 MCL-USB (radio) adapter FDUZ227 ..........................................................11

3.3 Protective cover FDMC295 ........................................................................12

3.4 Glass inserts FDMG295-x..........................................................................12

3.5 Plastic inserts FDMP295-x.........................................................................12

3.6 Key FDMK295 ...........................................................................................13

4 Specifications..................................................................................... 14

4.1 Technical data ...........................................................................................14

4.2 Dimensions................................................................................................16

4.3 Master gauge for recesses.........................................................................16

4.4 Environmental compatibility and disposal ...................................................17

Building Technologies

A6V10401114_f_en_

Fire Safety

2018

4 | 18

About this document

5 |

Building Technologies

A6V10401114_f_en_

Fire Safety

2018

1 About this document

Overview

The radio manual call points FDM275 and FDM275(F) are intended for use in

areas of a house where a fire can be detected by people who can manually trigger

an alarm.

The radio manual call points FDM275 and FDM275(F) consist of a housing, a

switching unit, and a battery pack.

Goal and purpose

This document contains all the information required to install the radio manual call

points FDM275 and FDM275(F).

Prerequisites:

●The installation location of the radio manual call point has been established.

●Mounting should be performed by a specialist in compliance with safety

regulations.

You will find more information about the radio manual call points FDM275 and

FDM275(F) in document A6V10401120.

Applicable documents

Document ID

Title

A6V10271323 Data sheet SWING Neural radio fire detector

FDCW241, FDOOT271, FDM273, FDM275, FDM275(F)

A6V10401120 Technical Manual Radio manual call point FDM275, FDM275(F)

A6V10227631 Planning Radio fire detection system SWING

Intended use

The radio manual call points FDM275 and FDM275(F) may only be used together

with a radio gateway FDCW241 in a fire detection system FS20/FS720.

FDM275 will now apply to both variants of the radio manual call point

–

FDM275

and FDM275(F).

Mounting and installation

Mounting ra

dio manual call point FDM275

6 | 18

Building Technologies

A6V10401114_f_en_

Fire Safety

2018

2 Mounting and installation

2.1 Mounting radio manual call point FDM275

Secure the radio manual call point

FDM275

at a height of 0.9…1.6

m on an even

surface. Observe the country-specific regulations for the exact mounting height!

Figure 1: Opening the housing with the key FDMK295

wThe position of radio manual call point FDM275 has been established.

wYou have a tool and two screws (max. ∅4 mm) for securing purposes.

1. Remove the housing cover with the key.

– Insert the key into the opening at the bottom of radio manual call point

FDM275.

– Use the key to pull the housing cover forward and off the back box.

2. NOTICE! Keep the key in a safe place.

3. Remove the switching unit from the back box.

4. For securing the back box, select two screw positions that are spaced far apart

from one another. See also chapter 'Master gage for recesses [➙16]'.

5. Screw the back box tightly in place.

aThe manual call point is now prepared for installation.

Mounting and installation

Installation

7 |

Building Technologies

A6V10401114_f_en_

Fire Safety

2018

2.2 Installation

1 Back box 9 Screws for switching unit

2 Battery pack BAT3.6-10110 Internal alarm indicator

3 Type plate with adhesive label 11 Plastic/glass insert

4 Battery holders 12 Housing cover

5 Battery connector 13 Retainer

6 Housing switching contact 14 Spring

7 Switching unit 15 Triggering device

8 Stop

1not included in the scope of delivery

The flashing behavior of the internal alarm indicator is described in document

A6V10401120 in the 'Internal alarm indicator' chapter.

wThe back box is fastened.

wYou have a new, undamaged battery pack to hand.

wYou have key FDMK295 and a Phillips screwdriver to hand.

wThe radio gateway has been activated and switched to maintenance mode.

1. Remove the adhesive label with the serial number from the type plate (3) on

the switching unit. Use the adhesive label to mark the position of the radio

manual call point FDM275 on the device location plan.

2. Label the battery pack (2) with the current date.

180°

Mounting and installation

Installation

8 | 18

Building Technologies

A6V10401114_f_en_

Fire Safety

2018

3. If the switching unit (7) needs to be switched to 'factory setting'

– Close the battery connector (5) and press the button in the 'new' opening

with a slim pen or pencil for approx. five seconds.

aThe internal alarm indicator flashes red.

aThe radio manual call point FDM275 is set to the factory setting.

4. Insert the battery pack into the switching unit so that it snaps into place in the

three battery holders (4).

5. Lay the connection cable according to the diagram and connect the battery

connector (5).

aThe internal alarm indicator (10) lights up red.

aAfter a further 10 seconds, the radio manual call point FDM275 signals that

it is not installed in the housing, and the internal alarm indicator flashes

every two seconds:

– If it flashes red, this indicates the factory setting.

– If it flashes green, this indicates that the radio manual call point FDM275

has already been logged on to a radio gateway.

aIf this does not happen, this means the battery pack is defective and must

not be used.

6. Place the switching unit with the battery pack into the back box (1).

7. Remove the plastic/glass insert (11). Details on replacing the glass can also be

found in the 'Replacing the plastic insert with a glass insert' chapter.

8. Screw the switching unit tightly to the back box (1) using the two screws

supplied with the switching unit (9).

9. Place the glass/plastic insert (11) between the stops (8) and slide the

plastic/glass insert against the triggering device (15), as shown in the diagram.

aThis pre-stresses the spring (14).

aThe internal alarm indicator flashes green and the radio manual call point

FDM275 is logged on to the radio gateway.

aIf the process of logging on to the radio gateway is successful, the internal

alarm indicator stops flashing.

10. If the logon process has not been successful after a long period of time,

remove the switching unit from the back box and then re-insert it.

aThe search for the radio network starts again.

11. Install the housing cover on the back box.

– Hook the top housing cover into the back box.

– Snap the bottom housing cover into place in the back box.

aRadio manual call point FDM275 is mounted and ready for commissioning.

WARNING

Deactivating the manual call points prevents alarms from being forwarded.

The alarm is not triggered.

●Mark deactivated manual call points or those which are not fully functional

with the

notice 'NOT IN USE'!

Mounting and installation

Installing the protective cover

9 |

Building Technologies

A6V10401114_f_en_

Fire Safety

2018

Figure 2: 'Not in use' label

2.3 Installing the protective cover

If a protective cover (accessories) is being used, proceed as described below:

wThe radio manual call point has been installed and electrically connected. See

the chapter 'Installation [➙7]'.

wA compatible protective cover is available. See the chapter 'Protective cover

FDMC295'.

lSnap the protective cover FDMC295 (2) into place in the recesses in the

housing cover (1) intended for this purpose. See also 'Protective cover

FDMC295' chapter.

aThe protective cover is installed.

Figure 3: Installing the protective cover FDMC295

1 Radio manual call point FDM275 2 Protective cover

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

DSC

DSC PC 4010 Manual del propietario