Siemens FT2009-U1 Manual de usuario

A6V10456393_enUS_c

Siemens Industry, Inc.

2016-06-16 Building Technologies Division

FT2009-U1 / FT2009-R1

LED Annunciator-32 Zone

Product Manual

Characteristic

l2 × 32 LEDs for 32 zones alarm/supervisory/trouble event display

lDisplay of system fault and ground fault from the entire system

lCommunication with panel through UFP (individual address)

lExternal 24V DC power source required from an UL listed/recognized for fire use,

regulated, power limited power supply

lIn total, up to 8 UFP type devices connected to a fire control panel

lManually activate / deactivate NAC’s

lAcknowledge and reset events from the entire system

lSelf test function

lFlat, elegant housing

UFP

FT2008

LampTest

Reset

Acknowledge

Silenced

Trouble

GroundFault

Power

FT2008-U1

AudiblesOn

LampTest

Reset

Acknowledge

Silenced

Trouble

GroundFault

Power

FT2008-U1

AudiblesOn

FT2009

24V DC

FT2007 built-in 24V DC 24V DC

firealarmresources.com

Siemens Industry, Inc. A6V10456393_enUS_c

Building Technologies Division 2016-06-16

LEDs & buttons & key switch

LEDs:

No. Color Status Functions

1Red /

Yellow

On Red: indicate alarm event or NAC activation event

from the zone.

Yellow: indicate supervisory event from the zone.

2Yellow On Indicate trouble event from the zone.

3Green On The LED annunciator power.

4Yellow On Indicate trouble event from the entire system.

Also indicate FT2009 communication failure.

(supervised at fire control panel).

5Yellow On Indicate ground fault event from the entire system.

6Red On Audibles are active.

7Yellow On Audibles are silenced.

8Yellow Flash Event waiting to be acknowledged.

Off All events are acknowledged.

9Yellow On The panel can be reset.

Off The panel is reset.

Buttons:

No. Button Functions

10 Audibles On /

Silenced

Silence / Un-silence the NAC’s in the event.

11 Acknowledge Acknowledge events.

12 Reset Resets the fire control panel to quiescent condition.

13 Lamp Test Test the LEDs and local buzzer.

Key switch: The key switch is used for control of button operation.

Lock key position Function

Buttons locked.

Buttons unlocked.

Lamp Test

Reset

Acknowledge

Silenced

Trouble

Ground Fault

Power

FT2009-U1

Audibles On

firealarmresources.com

Siemens Industry, Inc. A6V10456393_enUS_c

Building Technologies Division 2016-06-16

DIP switch & EOL jumper

S601 Dip-Switch for address setting

X209 EOL jumper for setting terminal resistor

X203 / X204 Connection to UFP, power supply and grounding

Dip-switch:

8-digit Dip-switch is used for the FT2009 address setting and baud rate setting. The

first 1-4 digits are for setting FT2009 address, the 7-8 digits are for setting UFP

communication baud rate. The 5 and 6 digits are reserved for future use.

Address

DIP switch

Baud Rate

DIP switch

1 2 3 4 7 8

1On Off Off Off 9600 bps Off Off

2 Off On Off Off 19200 bps On Off

3On On Off Off 38400 bps Off On

4Off Off On Off 57600 bps On On

5On Off On Off

6Off On On Off

7On On On Off

8Off Off Off On

Connect to fire control panel FC901/FC2005, 19200 bps is required.

EOL jumper: EOL jumper is used for setting terminal resistor of UFP.

Jumper IN Terminal resistor is connected.

Jump OUT Terminal resistor is not connected.

S601

X209 X203

X204

firealarmresources.com

Issued by

Siemens Industry, Inc.

Building Technology Division

8 Fernwood Road

Florham Park, NJ 08932

Tel. +1 973-593-2600

www.sbt.siemens.com/FIS

@2016 Siemens Industry, Inc.

Technical specifications and availability subject to change without notice.

Doc No. A6V10456393_enUS_c

Edition 2016-06-16

Dimensions

In: inch

Technical data

Operating voltage 24V DC Nominal / 18.8…27.2V DC

Operating current (quiescent) 25 mA

Activation current 105 mA

Operating temperature 32…120.2 °F

Storage temperature 14…+140 °F

Humidity ≤93 % rel.

Communication protocol UFP

Connection terminals 14…18 AWG

Color Black / Red

Operating location Indoor / dry

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Details for ordering

Type Material No. Part No. Designation Weight

FT2009-U1 S54400-A145-A1 101592281 LED annunciator-32 Zone, black 3.748 lb

FT2009-R1 S54400-A146-A1 101592282 LED annunciator-32 Zone, red 3.748 lb

·For Canadian applications, the “FT2009-U1”/“FT2009-R1” is deemed supplementary and can be used for display

only. It must be housed in a ULC-S527 approved, locked, enclosure.

·Not approved for UL/ULC MNS applications.

11.417

7.362

1.949

firealarmresources.com

Este manual sirve para los siguientes modelos

Otros manuales de Sistema de seguridad de Siemens

Siemens

Siemens FDM273-O Guía

Siemens

Siemens SISTORE AX4 Manual de usuario

Siemens

Siemens MM8000 Guía de configuración rápida

Siemens

Siemens WAC 12 Manual de usuario

Siemens

Siemens CP-48 Manual de instrucciones

Siemens

Siemens HMS-S Manual de usuario

Siemens

Siemens FC700A Especificaciones técnicas

Siemens

Siemens FS20 Instrucciones de funcionamiento

Siemens

Siemens IMKW6-10 Manual de usuario

Siemens

Siemens Cerberus PACE Manual de usuario

Siemens

Siemens Cerberus PACE Manual de usuario

Siemens

Siemens RB-6 L-801A Manual de usuario

Siemens

Siemens HFPO-11 Manual de usuario

Siemens

Siemens Codelock K44 Duo Manual de instrucciones

Siemens

Siemens SIPASS SK5 Manual de instalación y operación

Siemens

Siemens MI291A Guía

Siemens

Siemens IGS6-10 Manual de usuario

Siemens

Siemens FDM225 Manual de usuario

Siemens

Siemens IC60 Manual de usuario

Siemens

Siemens FDM275 Guía

Siemens

Siemens FDCAI181 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario

Siemens

Siemens FDM231-RP Manual de usuario

Siemens

Siemens FDS181C Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

DSC

DSC PC 4010 Manual del propietario