Siemens MindConnect Nano Manual de usuario

1. Mount MindConnect Nano

Mounting positions permitted vertical or horizontal.

Please make sure there’s enough space around the device

above: ≥ 50 mm, below: ≥ 100 mm

4. Load new ﬁ rmware on MindConnect Nano - if necessary

If your box was already connected to MindSphere V2, you have to set

MindConnect Nano to factory settings and upgrade it to a new V3

ﬁ rmware. For this procedure see „Getting

Connected to MindSphere“ or https://support.industry.siemens.com/cs/

ww/en/view/109745561

6. Download Conﬁ guration to USB

1. Click on next to „Status“.

2. Click on „Download Onboarding Key“.

3. Download the conﬁ guration ﬁ le for the asset and copy it to the root

directory of your USB stick. Note: Use USB stick with one FAT32

formatted partition. Conﬁ guration ﬁ le is valid only for seven days.

7. Plug USB into MindConnect Nano

1. Power LED (PC ON/WD) of MindConnect Nano is green.

2. Insert the USB stick with conﬁ gured asset data into the MindConnect

Nano.

3. The MindConnect Nano automatically reads the USB stick data (RUN/

STOP/L1 LED blinks orange), followed by a restart.

4. MindConnect Nano then attempts to establish connection to

MindSphere.

5. After a few seconds the RUN/STOP/L1 LED should be green and user

interface has the state Onboarded, which means it is connected

to MindSphere. (If the onboarding is not successful, see „Getting

Connected to MindSphere“).

6. Now remove USB stick from the MindConnect Nano.

5. Onboarding Process

1. Login

Access the MindSphere

Launchpad by clicking on

the link provided via E-Mail by

MindSphere.

2. Asset Manager

Open the Asset Manager and

create a new asset from type

MindConnectNano

(see „Getting Connected to

MindSphere“).

3. Enable Connection to

MindConnect Element

Enter the MindConnect Nano

InfoID. The rating plate is

located on the back panel of

the device.

4. Conﬁ guring network settings

1. Select the asset in the „Asset“

tab.

2. Click on the asset icon e.g.

MindConnect Nano.

3. Click on next to „Status“.

4. Activate DHCP if a DHCP server

is available in your company

network or enter the respective

information for static IP

address.

5. Enter the proxy data area

„Communication Settings“ if

necessary and click „Save“.

2. Connect Power Supply

1. Connect the protective earth (see „Getting Connected to

MindSphere“)

2. Secure the cables

3. Connect the power supply

3. Connect with your Network

1. Connect the internet to the X1P1 port for MindSphere

connection (see „Getting Connected to MindSphere“)

2. Connect the Ethernet to the X2P1 port for connection to

the plant network

3. Switch on the device

siemens.com/mindsphere

MindConnect Nano

Quick Start

8. Use MindSphere

Once MindConnect Nano is onboarded, you can conﬁ gure

your asset for data collection. After you have conﬁ gured

asset data, MindConnect Nano starts the data acquisition.

You can now start the Fleet Manager to see your machine data.

If you have any problems with MindConnect Nano, consult the LOG

ﬁ les in the “Files” extension of Fleet Manager. This extension provides

information that can be helpful for troubleshooting.

For additional information go to „Getting Connected to

MindSphere“.

Requirements

• PC with internet connection for MindSphere conﬁ guration

• Browser for online user interface, supporting HTML5 (e. g. Firefox,

Google Chrome, Safari, Opera)

• Login data for MindSphere Access provided by Siemens after orde-

ring MindSphere

• Power Supply, 24 V DC

• Standard USB stick, one partition, FAT32 formatted

Further Information

• Getting Connected to MindSphere

(https://documentation.mindsphere.io/index.html#/kiosk/en)

• MindSphere – FAQs (https://www.mindsphere.io/community)

• Industry Online Support:

https://support.industry.siemens.com

This document contains illustrations and accessories.

The illustrations may deviate from the particularities of the

delivered device and accessories.

We have reviewed the contents of this publication to ensure

consistency with the hardware and software described. Since

variance cannot be entirely excluded, we cannot guarantee full

consistency. However, the information in this publication is

reviewed regularly and all necessary corrections will be included

in subsequent editions.

In order to protect plants, systems, machines and networks

against cyber threats, it is necessary to implement – and

continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions only form

one element of such a concept. For more information about

industrial security, please visit

https://www.siemens.com/industrialsecurity.

Digital Factory

P.O. Box 48 48

90026 Nuremberg

Germany

Subject to change without prior notice

Article No.: DFPL-T10029-00-7600

Dispo 21639

fb 7328 WS 07160.25 A5E38886585-AD

Printed in Germany

The information provided in this brochure contains merely

general descriptions or characteristics of performance which

in case of actual use do not always apply as described or

which may change as a result of further development of the

products. An obligation to provide the respective

characteristics shall only exist if expressly agreed in the

terms of contract.

Otros manuales para MindConnect Nano

Otros manuales de Puerta de Siemens

Siemens

Siemens SIRIUS 3RK3141 Series Manual de usuario

Siemens

Siemens 5935 Manual de usuario

Siemens

Siemens NK8237 MP4.81-02 Guía rápida

Siemens

Siemens SIMATIC S7-200 Manual de usuario

Siemens

Siemens SIMATIC TI500 Manual de usuario

Siemens

Siemens Sinamics Connect Series Manual de usuario

Siemens

Siemens RUGGEDCOM WIN5137-V Manual de usuario

Siemens

Siemens SIMATIC IOT Manual de usuario

Siemens

Siemens NK8237 MP4.40 Manual de lista de piezas

Siemens

Siemens SIMATIC IOT2050 Manual de usuario

Siemens

Siemens FDCW241 Manual de usuario

Siemens

Siemens A53457 Guía de mantenimiento y servicio

Siemens

Siemens VNT Manual de usuario

Siemens

Siemens SIMATIC NET IE/WSN-PA Link Guía del administrador

Siemens

Siemens Instabus/DALI Gateway N 141 Manual de usuario

Siemens

Siemens RUGGEDCOM WIN5151 Manual de usuario

Siemens

Siemens Advance Network Gateway Manual de usuario

Siemens

Siemens Tiastar LV MCC Manual de usuario

Siemens

Siemens SpeedStream 6500 Series Manual de usuario

Siemens

Siemens HiPath HG 1500 Manual de usuario

Siemens

Siemens SIMATIC NET IE/WSN-PA Link Guía del administrador

Siemens

Siemens Gigaset SX686 WiMAX Manual de usuario

Siemens

Siemens SIMATIC IOT2050 Manual de usuario

Siemens

Siemens GW-23 Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario