Amit CDW531AM Manual de usuario

WiFi Combo Broadband

Gateway

User Guide

The contents of this publication may not be reproduced in any part or as a whole, stored,

transcribed in an information retrieval system, translated into any language, or transmitted in any

form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or

otherwise, without the prior written permission.

Trademarks

All products, company, brand names are trademarks or registered trademarks of their respective

companies. They are used for identification purpose only. Specifications are subject to be changed

without prior notice.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against radio interference in a commercial environment. This equipment can generate, use and

radiate radio frequency energy and, if not installed and used in accordance with the instructions in

this manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause interference, in which case the user, at his own

expense, will be required to take whatever measures are necessary to correct the interference.

CE Declaration of Conformity

This equipment complies with the requirements related to electromagnetic compatibility, EN

55022/A1 Class B.

The specification is subject to change without notice.

FCC COMPLIANCE STATEMENT

Table of Contents

FCC Interference Statement........................................................................................ 2

1. Introduction............................................................................................................... 4

1.1. Package Contents...................................................................................... 4

1.2. System Requirements for Configuration................................................ 4

1.3. Interfaces - the Rear View........................................................................ 5

1.4. LEDs and Buttons – the Front View....................................................... 5

1.5. Features...................................................................................................... 6

2. Configuring WiFi Combo Broadband Gateway.............................................. 7

2.1. Installation Considerations...................................................................... 7

2.1.1. Installation Instructions- Get Start Networking.................................... 7

2.1.2. Establish WiFi Connection....................................................................... 9

3. Using the Configuration Menu .......................................................................... 10

3.1. Wizard setting ......................................................................................... 12

3.2. Administrator’s Main Menu.................................................................. 18

4. Troubleshooting................................................................................................... 55

5. Technical Specifications...................................................................................... 58

1. Introduction

The WiFi Combo Broadband Gateway is a high-performance tool that supports wireless

networking at home, work, or in a public place. The WiFi Combo Broadband Gateway supports

a USB 3G modem card, either WCDMA or EVDO and even HSDPA as well, and supports

wireless data transfers up to 150M bps, and wired data transfers up to 100 Mbps.

The WiFi Combo Broadband Gateway is compatible with industry security features.

1.1. Package Contents

Importance: Check your product package contents FIRST.

The WiFi Combo Broadband Gateway package should contain the items listed below. If any

of the items are missing, please contact your reseller.

items Description Quantity

1 WiFi Combo Broadband Gateway 1

2 RJ-45 Cable 1

3 Power adapter 5V 2.0A 1

4 CD 1

Caution: Using a power supply with a different voltage rating than the one included with the

WiFi Combo Broadband Gateway will cause damage and void the warranty for this product.

1.2. System Requirements for Configuration

• A compatible USB 3G modem card with service

Note: Subject to services and service terms available from your carrier.

• Computers with Windows, Macintosh, or Linux-based operating systems with an installed

Ethernet adapter.

• Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above.

• Wi-Fi System Requirements: An 802.11b, 802.11g, or 802.11n Adapter.

1.3. Interfaces - the Rear View

1.4. LEDs and Buttons – the Front View

Note:

Contains a reset button to restore the setting back to original factory defaulted setting as if your

convenience of forgetting your applicable setting

Reset Button

Restore to Original

factory defaulted setting

USB port for connecting

with 3G USB modem

Receptor for

Power adapter

Auto MDI/MDIX RJ-45 Ports

Automatically sense the types of WAN

and LAN when connecting to Ethernet

WPS Button

Restore to Original

factory defaulted setting

WiFi LED

A green light as

connection on

WLAN available

LAN LED

A green light as connected

to local Ethernet and blinks

durin

data is transmission

WAN LED

A green light as

WAN is connected

Mobile/Status LED

A green light as

what’s status of

ower or 3G card.

1.5. Features

zIEEE 802.11b/g compliant and 11n Lite (HW 1T1R not MIMO solution.)

Backward compatible to IEEE 802.11b standards

Max physical rate up to 54Mbps in 802.11g mode

Max physical rate up to 150Mbps in 802.11n mode

Security Supports: WEP (64/128 bits), WPA, WPA2, WPA-PSK,

WPA2-PSK, and 802.1x

WPS Support

zProvide 5 * 10/100 RJ-45 ports

4 * LAN

1 * WAN

zWAN connection through external USB 3G/3.75G modem card

WCDMA,HSDPA,HSUPA(depend on region)

CDMA2000,EV-DO(depend on region)

TD-SCDMA,TD-HSDPA(Option)

Flash OFDM(Reserve)

iBurst(Option)

zBuilt-in NAT function: one IP sharing with PCs

zBuilt-in firewall to protect your Intranet

zVPN pass through supported

PPTP

L2TP

IPSec

zEasy to upgrade firmware

Web UI

Windows utility

zEasy to manage:

Web UI

SNMP

UPnP

zNetwork Protocols

UDP/TCP/IP/ARP/RARP/ICMP

DHCP/PPPoE

DNS/TFTP/HTTP

zAntenna

1 x PiFa Wi-Fi antenna

Note: The WiFi Combo Broadband Gateway is designed to work with 3G USB dongle,

(either EVDO or WCDMA (UMTS)).

Please refer to your service provider for detailed feature information.

2. Configuring WiFi Combo Broadband Gateway

2.1. Installation Considerations

The WiFi Combo Broadband Gateway allows you access your network using a wireless

connection, from virtually anywhere within its operating range. Keep in mind however, that

the number, thickness, and location of walls, ceilings, or other objects that the wireless

signals must pass through, may limit this range.

Typical ranges vary depending on the types of materials used, and background RF (radio

frequency) noise in your home or business.

To maximize your wireless range, please follow these guidelines:

1. Keep the number of walls and ceilings between the WiFi Combo Broadband Gateway and

other network devices to a minimum. Each wall or ceiling can reduce the WiFi Combo

Broadband Gateway’s range from 3-90 feet (1-30 meters).

Note: The same considerations apply to your broadband EVDO connection.

2. Keep your product aware from electrical devices (such as microwaves, air conditioners,

and televisions) that emit large quantities of RFI (Radio Frequency Interference).

2.1.1. Installation Instructions- Get Start Networking

Connect this Gateway to Your Network

Note: DO NOT connect WiFi Combo Broadband Gateway to power before performing

the installation steps below.

1. Connect a USB modem with service to the WiFi Combo Broadband Gateway--

See Picture 2.1

Picture 2.1

Note: The WiFi Combo Broadband Gateway is designed to work with either

UMTS or EV-DO and even HSDPA 3G cards that can be used as a modem

(support tethered data). Please refer to your service provider for detailed feature

information.

註解 [01]: 加上 to

allow you to

註解 [02]: 應改為 However,

keep in mind that

註解 [03]: 應改為

away

2. Insert the Ethernet patch cable into LAN Port on the back panel of the WiFi Combo

Broadband Gateway, and an available Ethernet port on the network adapter in the

computer you will use to configure the unit.-See Picture 2.2

Picture 2.2

Note: The WiFi Combo Broadband Gateway LAN Port is “Auto-MDI/MDIX.” This

provides patch Ethernet cable LAN Port access.

3. Connect the power adapter to the receptor on the back panel of your WiFi Combo

Broadband Gateway. Then plug the other end of the power adapter into a wall outlet

or power strip. –See Picture 2.3

Picture 2.3

4. The LEDs

Reference the Section 1.4, LEDs and Buttons– the Front View.

2.1.2. Establish WiFi Connection

If you selected either WEP or WPA-PSK encryption, ensure these settings match your

WiFi adapter settings.

WiFi and encryption settings must match for access to the WiFi Combo Broadband

Gateway Configuration Menu, and the Internet. Please refer to your WiFi adapter

documentation for additional information.

註解 [04]: 刪除 for

3. Using the Configuration Menu

Once properly configured, the WiFi Combo Broadband Gateway will obtain and assign IP

address information automatically. Configuration settings can be established through the

WiFi Combo Broadband Gateway Configuration Menu. You can access this interface by

performing the steps listed below:

1. Open a web-browser.

2. Type in the IP Address (http://192.168.123.254) of the WiFi Combo Broadband Gateway.

Note: If you have changed the default IP Address assigned to the WiFi Combo Broadband

Gateway, ensure you enter the correct IP Address now.

Tabla de contenidos

Otros manuales de Puerta de Amit

Amit

Amit BDG761-0P1 Manual de usuario

Amit

Amit IOG761-0TV21 Manual de usuario

Amit

Amit RRU-WC/110x Manual de usuario

Amit

Amit IDG761AM-0T001 Manual de usuario

Amit

Amit BDE702-001 Manual de usuario

Amit

Amit IOG761-0T001 Manual de usuario

Amit

Amit IDG550-0T00001 Manual de usuario

Amit

Amit ODG851-0TCP001 Manual de usuario

Amit

Amit BTG771AM-0T1 Manual de usuario

Amit

Amit RRU-WEC/1201 Manual de usuario

Amit

Amit IOG851-0T031 Manual de usuario

Amit

Amit IDG761AM-0P001 Manual de usuario

Amit

Amit ODG761AM-0T1 Manual de usuario

Amit

Amit RRR-WTB/C Manual de usuario

Amit

Amit ODG761AM-0T1 Manual de usuario

Amit

Amit IOG761AM-0TDA1 Manual de usuario

Amit

Amit IOG851-WT041 Manual de usuario

Amit

Amit TE1088 Guía del usuario

Amit

Amit RRU-WEM/1151 Manual de usuario

Amit

Amit M2M IDG500-0T012 Manual de usuario

Amit

Amit RRU-WEM/1158 Manual de usuario

Amit

Amit VHG760AM-0T001 Manual de usuario

Amit

Amit IOG500AM-0T001 Manual de usuario

Amit

Amit SDE852-00001 Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario

RTA

RTA 460MCBC-N2E Hoja de especificaciones