Sanyo Xacti VPC-CA6 Manual de usuario

VPC-CA6EX

VPC-CA6

INSTRUCTION MANUAL

Digital Movie Camera

Please read these instructions carefully before using the camera.

Make sure to read and understand the separate booklet “SAFETY MANUAL”.

Keep this manual in a safe place for later reference.

Important note

This manual explains how to safely operate the VPC-CA6EX and VPC-CA6.

Any information regarding only one of these products will be labeled as such.

iEnglish

Warning

TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE

FOR AMERICAN USERS

The following advisory is included in accordance with the laws of the State of

California (USA):

WARNING:

This product contains chemicals, including lead, known to the State of

California to cause cancer, birth defects or other reproductive harm. Wash

hands after handling.

iThis equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

hReorient or relocate the receiving antenna.

hIncrease the separation between the equipment and receiver.

hConnect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

hConsult the dealer or an experienced radio/TV technician for help.

iChanges or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

Model number: VPC-CA6

Trade Name: SANYO

Responsible party: SANYO FISHER COMPANY

Address: 21605 Plummer Street, Chatsworth, California 91311

Telephone No.: (818) 998-7322

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

Declaration of Conformity

English ii

FOR CANADIAN USERS

iThis Class B digital apparatus complies with Canadian ICES-003.

FOR EU USERS

Note:

iThis symbol mark and recycle system apply only to EU

countries and do not apply to countries in other areas of

the world.

Your SANYO product is designed and manufactured with

high quality materials and components which can be

recycled and reused.

This symbol means that electrical and electronic

equipment, at their end-of-life, should be disposed of

separately from your household waste.

Please dispose of this equipment at your local community

waste collection/recycling centre.

In the European Union there are separate collection

systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

Symbols used in this manual

HINT Points giving some extended instructions or special points to pay

attention to.

CAUTION Points that require special attention.

(page xx) Refer to the page indicated for detailed information.

You may find the answers to questions or problems concerning camera

operation in the sections “COMMONLY ASKED QUESTIONS” (page 149)

and “TROUBLESHOOTING” (page 156).

iii English

SHOOT, PLAY BACK AND SAVE

Install the battery pack and card

1 Insert the battery pack.

2 Insert the card.

1Open

2Insert

Battery slot

Lock button

Card slot 2Push it all the way in.

1Insert

English iv

Shooting

kVideo clip recording

1 Open the monitor unit.

hThe camera turns on.

2 Press the video clip

recording button [ ].

hRecording begins.

hTo stop recording, press

the video clip recording

button again.

kStill image

photography

1 Open the monitor unit.

hThe camera turns on.

2 Press the still image

shooting button [ ].

hThe image is captured.

01:10:15

Monitor unit

Video clip

recording button

[]

Still image shooting

button []

vEnglish

SHOOT, PLAY BACK AND SAVE

Playback

kVideo clip playback

Press the REC/PLAY button.

hThe display switches to the

Playback Screen.

hToggle the SET button to

the left or right to display the

video clip you wish to play

back.

hVideo clips are indicated by

a video clip pattern along

the top and bottom of the

screen.

2 Press the SET button.

hPlayback of the selected

video clip begins.

kStill image playback

Press the REC/PLAY button.

hThe display switches to the

Playback Screen.

hTo view other images,

toggle the SET button to the

left or right.

<To return to the Shooting

Screen>

hPress the REC/PLAY

button.

When you are finished using the camera...

Press the power button [ ] to turn the camera off.

REC/PLAY button

SET button

<Example: After recording

a video clip>

Video clip pattern

English vi

Burn your recorded video clips onto a DVD

(Windows XP)

Using the supplied CD-ROM (SANYO Software Pack), you can import the

captured images to your computer and store them on a DVD. Detailed

information about the SANYO Software Pack can be found on page 4 in

the SANYO Software Pack INSTRUCTION MANUAL.

Install application programs

1 Set the supplied CD-ROM (SANYO Software Pack) in your

computer’s CD-ROM drive.

hThe installation window opens.

2 Click on the application program you wish to install.

hAfter clicking on an application program, follow the instructions shown

on the monitor to install the program.

hWhen the installation is complete, the product registration window will

appear, but click on the Exit button to close the window.

Install the application program with which you can import images

to a computer (Photo Explorer).

Install the application program with which you can create DVDs

(MovieFactory).

vii English

SHOOT, PLAY BACK AND SAVE

3 In the installation window, click on [Finish] and remove the CD-ROM

from the computer’s CD-ROM drive.

hWhen the installation window closes, a dialog box to connect to the

website introducing Kodak’s online service appears. Check the [No

thanks!] option button, and then click on the [OK] button.

Connect your camera to a computer

Use the supplied dedicated USB interface cable to connect your camera to a

computer (page 7 in the SANYO Software Pack INSTRUCTION MANUAL).

Copy a video clip to your computer

Run PhotoExplorer, set the location of the camera’s data as the copy source,

and copy the video clip(s) to your computer (page 17 in the SANYO Software

Pack INSTRUCTION MANUAL).

CANCEL

PC CAMERA

PictBridge

CARD READER

USB CONNECTION

USB/AV terminal

To USB/AV terminal on

the camera

To USB connector on the computer

Supplied dedicated

USB interface cable

English viii

Burn video clips onto a DVD

1 Click on your desktop’s [Ulead DVD MovieFactory 4.0 Launcher for

SANYO] icon to run MovieFactory.

hThe MovieFactory launcher appears.

hIf the product registration screen appears, select [Register Later].

ix English

SHOOT, PLAY BACK AND SAVE

2 Click on [Create Video DVD] and then click on [DVD-Video or

DVD+VR].

hThe [Add/Edit Media] window opens.

3 Click on the [Add video files] icon.

hThe [Open Video File] dialog box opens.

hOpen the folder that contains the video files

(My Documents\SANYO_PEX\datefolder).

[Add video files] icon

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara digital de Sanyo

Sanyo

Sanyo VPC-X1200BK Manual de usuario

Sanyo

Sanyo VPC-AZ3EX Manual de usuario

Sanyo

Sanyo VPC-E890 Manual de usuario

Sanyo

Sanyo Xacti VPC-S70EX Manual de usuario

Sanyo

Sanyo VPC-S1275 Manual de usuario

Sanyo

Sanyo XACTI VPC-GH3EX Manual de usuario

Sanyo

Sanyo VPC-E1600TP Manual de usuario

Sanyo

Sanyo VPC-E1075 - 10-Megapixel Digital Camera Manual de usuario

Sanyo

Sanyo Xacti VPC-E760 Manual de usuario

Sanyo

Sanyo Xacti VPC-S4 Manual de usuario

Sanyo

Sanyo VPC-X1200BK Manual de usuario

Sanyo

Sanyo VPC S6 - Xacti Digital Camera Manual de usuario

Sanyo

Sanyo VPC-X1220EX Manual de usuario

Sanyo

Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Manual de usuario

Sanyo

Sanyo VPC S770 Manual de usuario

Sanyo

Sanyo VPC-E6U - 6-Megapixel Digital Camera Instrucciones de montaje

Sanyo

Sanyo Xacti VPC-C6 Manual de usuario

Sanyo

Sanyo Xacti VPC-C40 Manual de usuario

Sanyo

Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Manual de usuario

Sanyo

Sanyo Xacti VPC-S70EX Manual de usuario

Sanyo

Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Manual de usuario

Sanyo

Sanyo VCC-9300 Manual

Sanyo

Sanyo Xacti VPC-S3 Manual de usuario

Sanyo

Sanyo Xacti VPC-S4 Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario

Nikon

Nikon Coolpix 100 Manual de usuario