BlazeVideo A280 Manual de usuario

Trail Camera

Model#: A280

INSTRUCTION MANUAL

V1.1

TABLE OF CONTENT

1. IN THE BOX............................................................... 1

2. IMPORTANT NOTE...................................................1

3. INTRODUCTION........................................................1

3.1. ABOUT THE CAMERA................................... 1

3.2. MAIN FEATURES........................................... 2

3.3. APPLICATIONS...............................................3

4. PARTS AND CONTROLS......................................... 3

5. INSTALLING THE BATTERIES AND SD CARD.. 7

5.1. LOADING BATTERIES................................... 7

5.2. INSERTING THE SD CARD............................8

6. USING THE CAMERA...............................................9

7. THE OFF, ON, AND SURVEILLANCE MODES...10

7.1. OFF MODE................................................... 10

7.2. ON MODE......................................................10

7.3. SURVEILLANCE MODE...............................11

8. ADVANCED SETTINGS......................................... 11

9. MOUNTING AND POSITIONING..........................16

9.1. MOUNTING...................................................16

9.2. SENSING ANGLE AND DISTANCE TEST... 17

9.3. STARTING..................................................... 18

10. REVIEW PHOTOS OR VIDEOS........................... 19

11. TECHNICAL SPECIFICATIONS.......................... 20

12. TROUBLESHOOTING...........................................21

13. WARRANTY...........................................................23

14. FCC COMPLIANCE STATEMENT...................... 24

1. IN THE BOX

1 x Camera, 1 x Mount Strap,

1 x Instruction Manual, 1 x Mini USB Cord

Note: Memory card and batteries are not included (user supplied).

2. IMPORTANT NOTE

Require eight (8) 1.5V AA Alkaline or Lithium batteries.

We recommend the use of Energizer AA Lithium batteries

in this camera to obtain maximum battery life.

Do not mix old and new batteries.

Do not mix battery type.

Rechargeable AA batteries are NOT recommended as the

lower voltage they produce can cause operational issues.

Remove batteries when the camera is NOT in use.

Require a regular SD memory card (max capacity 256GB,

Class 10). We recommend using SanDisk 32GB

SDHC/Class10 memory cards in the camera to obtain the

best cost-performance.

Before use, please gently remove the protective films on the

front of the camera to get the best performance, format your

SD card in the camera.

3. INTRODUCTION

3.1. ABOUT THE CAMERA

The A280 trail camera is a new generation of digital

scouting camera, it can be triggered by any movement of

game in a location, detected by a highly sensitive Passive

Infra-Red (PIR) motion sensor, and then take high quality

pictures (up to 24MP still photos), or 1296P H.264 video

clips with audio.

The camera features the all-new innovative and ultra-clear

imaging technology, encompasses all-new software

innovations, smart illumination technology, blur reduction

technology, auto noise reduction and dynamic exposure

technology to deliver high resolution image quality.

3.2. MAIN FEATURES

High quality pictures (max 24MP still photos), 1296P

20fps or 1080P 30fps H.264 video clips with audio

Clear night vision, flash range 100ft. The camera is

equipped with 36pcs high-power infrared no glow

940nm LEDs that function as a flash, invisible to eyes

Wide view angle - 70°

Easy to use with well-designed operation buttons and

built-in 2.4-inch color screen, easy to program, review

pictures and videos on the screen

Two working modes - Motion detection and Time lapse

Fast trigger time approx. 0.1~0.6 seconds (pre-activated

technology with 3 PIR sensors designed), Fast recovery

time of less than 0.5 second, Long trigger distance up to

90ft.

Info strip on each capture: Date, Time, Temperature &

Moon phase

Operation hours, Loop recording, Password protected

Built for any climate - IP66 Waterproof designed for

outdoor use and resistant against rain and snow.

Operation Temperature: -4~140°F

Support SD/SDHC/SDXC memory card, max capacity

256GB (user supplied)

Extremely long in-field battery life up to 8 months in a

stand-by state with 8 AA 1.5V batteries (user supplied)

3.3. APPLICATIONS

The camera can be used as follows:

For hunting and trailing animals’ trace or habit

For wildlife observing and researching, captures pictures

and videos of wild animals

As sports camera, for riding, driving, camping or

exploring

As motion-triggered security camera, for home, farm,

office and community

All other indoor & outdoor surveillance where invasion

evidence needed

4. PARTS AND CONTROLS

The camera is equipped with 36pcs high efficiency infrared

LEDs, LED Indicators, Lens, PIR Sensors, Lock Holes in

front view (Figure 1).

Figure 1: Front View

IR LEDs

Lock

Hole

Optical

Lens

PIR

Lens

Light

Sensor

Indicator

Lock

Buckle

The camera provides the following connections for external

devices: Mini USB port and SD card slot etc. (Figure 2).

Figure 2: Bottom View

The camera has one security cable hole and two strap holes

on the back. The strap can be put through the strap holes

and fastened securely around the tree trunk by pulling the

end of the strap firmly (Figure 3).

Figure 3: Right / Back View

The camera has a 2.4-inch built-in LCD screen, which can

be used for reviewing pictures or videos and menu

displaying, and exclusive keypad design for easy program

Tripod Base

1/4" - 20

SD Card

Holder

DC 12V/1A

Plug 5.5x2.1mm

Strap

Hole

Lock

Buckle

Mini USB Port

Microphone

Security

Cable Hole

and operation, 8 AA batteries slot supported (Figure 4).

Figure 4: Inside View

Figure 5: Operation Buttons

A power switch is used to power on (ON mode) or off the

camera (OFF mode). A START button is used to quickly

make the camera into the surveillance mode (motion

detection or time lapse per your settings (Figure 5). When

the camera is in the surveillance mode, press the START

button to wake up the camera.

Power

Switch

Color

Screen

Battery

Compartment

and Cover

Operation

Buttons

Surveillance

Mode

5. INSTALLING THE BATTERIES AND SD CARD

Before you begin learning how to use your camera, you will

first need to install a set of batteries and insert an SD card.

Although that may only take you a minute, there are some

important notes about both batteries and SD cards you

should be aware of, so please take the time to read the

following directions and cautions:

5.1. LOADING BATTERIES

After opening the cover of the battery compartment, you

will see that the camera has eight battery slots (Figure 6). A

full eight batteries must be installed for the camera to

operate. Be sure to insert each battery with correct polarity

(negative or "flat" end against the long spring of each

battery slot).

In ON mode when battery power level gets low, the

message "Low Battery" will show on the screen, please

replace the batteries. If the message “Night vision is

unavailable at low voltage” shows on the screen, the

batteries still work at daytime till “Low Batteries”, but this

does mean the batteries are not able to drive IR LEDs flash

at night, if you want to continue night vision, please replace

the batteries.

Figure 6: Loading the Batteries

5.2. INSERTING THE SD CARD

Insert the SD card (with the camera powered off), before

beginning to operate the camera. Don't insert or remove the

SD card when the camera is powered on or in the

surveillance mode. (Figure 7).

Figure 7: Inserting the SD Card

The following describes how to insert and remove the SD

card:

Insert the SD card into the card slot with its label side

upwards.A "click" sound indicates that the card is

installed successfully. If the wrong side of the card is

facing up, you will not be able to insert it without force,

there is only one correct way to insert cards. If the SD

一

Tabla de contenidos

Otros manuales de Cámara digital de BlazeVideo

BlazeVideo

BlazeVideo W600 Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario

Nikon

Nikon Coolpix 100 Manual de usuario