Sanus BMF320 Manual de usuario

BMF

320

INSTRUCTION MANUAL

Texto en español, página 13

GET IT

RIGHT

THE FIRST TIME

Follow this step-by-step

instruction manual to

speed up your installation.

WE’RE HERE TO HELP

Our US-based install experts

are standing by to help.

Call us at:

800-359-5520

Or, chat at:

SANUS.com/chatSP

Get it right the ﬁrst time.

HeightFinder™ shows you

where to drill.

Check it out at:

SANUS.com/1172

Want to watch a video that

shows how easy this DIY

project will be?

Watch it now at:

SANUS.com/2782

Wood Stud Install

Concrete Install

Awl

Pencil Level Tape

Stud

Finder

ScrewdriverTape

Measure

1/8 in.

(3 mm)

Wood

Drill Bit

Electric

Drill

Hammer

7/16 in.

(11 mm)

Socket

Wrench

Drill Bit

3/8 in.

(10 mm)

Concrete

55 lbs.

(24.9 kg)

IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ MANUAL PRIOR TO USE –

SAVE THESE INSTRUCTIONS

Please read through these instructions completely to be sure you’re comfortable with this easy install process.

Check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,

contact Customer Service 1-800-359-5520.

CAUTION: Avoid potential personal injuries and property damage!

●This product is designed ONLY to be installed into wood studs, solid concrete or concrete block.

— DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.

●This product is designed for INDOOR USE ONLY.

●The wall must be capable of supporting ﬁve times the weight of the TV and mount combined.

●Do not use this product for any purpose not explicitly speciﬁed by manufacturer.

●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

TV Weight Limit

(including accessories)

DO NOT EXCEED

If your TV (including accessories) exceeds

this weight, this mount is NOT compatible.

Visit SANUS.com or call customer service to

ﬁnd a compatible mount.

1-800-359-5520

Call Customer Service

1-800-359-5520

Tools Needed

Wall

Construction

ONLY install on

these acceptable

wall types. Drywall alone

will NOT hold

the weight of

your TV.

Unsure

wood studs Solid concrete or

concrete block

ACCEPTABLE ACCEPTABLE

CAUTION:

DO NOT install

in drywall alone

7/16 in.

(11 mm)

16.28

413.4

15.75

400.0

16.40

416.6

18.03

458.0

0.38

9.7

3.94

100.0

3.94

100.0

11.39

289.3

2.59

65.8

0.33

8.4

13.03

331.0

15.93

404.5a

2.46

62.5

OFFSET

20.00

508.1

60.00°

SIMULATED 49"

FLAT SCREEN TV

15°

5°

2.04

51.8

TV INTERFACE

WALL PLATE

FULLY ASSEMBLED MOUNT

TOP VIEW - EXTENDED

TOP VIEW - RETRACTED

SIDE VIEW - EXTENDED

SIDE VIEW - RETRACTED

3-D

Dimensions

BEFORE YOU BEGIN

Remove the stand

from your TV — if attached.

Install any accessories

you may have purchased, if they

requireTV removal prior to assembly.

The TV is removable for future

accessory purchases.

Soft clean surface

Protect the face

of your TV when laying it

down for installation.

• Flat Back TV

[TV brackets lay ﬂat on your TV]

NO SPACER SPACER NEEDED

A B

Only one screw size ﬁts your TV.

M6 M8

Use short TV screws 01 .

Spacers 03 not needed.

STEP 1 Attach TV Bracket to TV

Use long TV screws 01 and spacers 03 to create

extra space between the TV and TV bracket.

• Flat Back TV with extra space needed

[for deep inset holes or cable interference]

• Rounded or Irregular Back TV

[TV brackets NOT resting ﬂat on your TV]

CAUTION: Verify adequate thread engagement with your screw 01 ,

washer 02 , spacer 03 combination AND TV bracket 06 .

— Too short will not hold your TV. — Too long will damage your TV.

1.2 Select TV Screw Length and Spacers1.1 Select TV Screw Diameter

NOTE: If your TV

included inset spacers

or adapters, use them

UNDER the mount

hardware.

Supplied Parts and Hardware

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included

and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE: Not all hardware included will be used.

M8 x 35mm

M8 x 16mm

M5 x 10mm

M6 x 12mm M6 x 35mm

M4 x 12mm M4 x 35mm

M8 x 50mm 22mm

2.5mm

5mm

M8 x 25mm

STEP 1 Parts and Hardware

TV Screws

(qty. 4 each) [Only one size ﬁts your TV]

Washers

(qty. 4 each)

Spacers

[If necessary]

(qty. 4 each)

M6/M8

M4/M6/M8

(qty. 1)

(qty. 4)

(qty. 2)

TV Bracket Vertical

Interface Screw

TV Bracket

Horizontal

MOUNTING TABS

(ATTACHED)

RELEASE CORD

(ATTACHED)

MOUNTING TABS

1.3 Attach TV Brackets to Your TV

TV Bracket

Horizontal

Adjust mounting tabs M on TV brackets 06 to match the width W

of your TV's mounting hole pattern.

300 mm position illustrated

2ADJUST TO WIDTH W

Measure the WIDTH and HEIGHT of your TV's mounting hole pattern.

1MEASURE

inch dimensions are approximate

inches cm mm

410 100

7⅞20 200

11 ¾ 30 300

15 ¾ 40 400

inches

100

⅞

200

11 ¾

300

15 ¾

400

inches

For height 200 mm or less For height greater than 200 mm

For hole pattern height H greater than 200 mm, align horizontal TV

brackets 06 with mounting tabs M to the outside.

For hole pattern height H 200 mm and less, align horizontal TV

brackets 06 with mounting tabs M to the inside.

3a ASSEMBLE FOR HEIGHT H3b ASSEMBLE FOR HEIGHT H

≤ 200 mm > 200 mm

04 04

06 06

TV bracket 04 must be centered on your TV, but can be offset up or

down to avoid cable interference.

5CENTER

Adjust TV brackets 06 to align with your TV hole pattern. Install using the

screw 01 /washer 02 /spacer 03 combination you selected for your TV.

4LOOSELY ASSEMBLE

02 02

NO SPACER SPACER NEEDED

A B

Secure the TV brackets using four interface screws 05 , starting with

the top two screws in the notches shown.

6SECURE ASSEMBLY

0505

Securely tighten the screws from STEP 4 and STEP 6.

7TIGHTEN ALL SCREWS

Attach Wall Plate to Wall

STEP 2

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are

included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service.

Never use damaged parts!

NOTE: Not all hardware included will be used.

Fischer UX10 x 60R

1/4 x 2¾ in.

1/4 in.

09 x2

10 x2

07 x1 08 x1

Parts and Hardware for STEP 2

Lag Bolt Washer

Arm Assembly

Wall Plate

Template

Concrete Anchor

For concrete installations ONLY

CAUTION: Do not use in drywall or wood

CABLE COVERS

(ATTACHED)

WALL PLATE

COVER

(ATTACHED)

For WOOD STUD

INSTALLATIONS

For CONCRETE

INSTALLATIONS

Follow 2A on PAGE 8

Follow 2B on PAGE 9

For

WOOD STUD

INSTALLATIONS

Follow 2A on PAGE 8

For

CONCRETE

INSTALLATIONS

Follow 2B on PAGE 9

STEP 2A Attach Wall Plate Wood Stud Installation

Min. 3 ½ in. (8.9 cm)

Min. 1 ½ in. (3.8 cm)

Max. 5/8 in. (1.5 cm)

CAUTION: Avoid potential personal injury or property damage!

●Drywall covering the wall must not exceed 5/8 in. (1.5 cm)

●Minimum wood stud size:

nominal 2 x 4 in. (5.1 x 10.2 cm) actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)

●Stud center must be veriﬁed

1LOCATE STUD 2VERIFY 3MARK

¾ in. (7.0 cm)

1/8 in.

(3 mm)

5DRILL

CAUTION:

Be sure you drill into the

CENTER of the stud.

6REMOVE COVERS

TIP:

To calculate your precise wall plate location,

check out our HeightFinder at sanus.com

[www.sanus.com/1172].

sanus.com

/1172

HeightFinder™

Visit

4POSITION TEMPLATE

7SECURELY TIGHTEN 8INSERT COVERS

2X 08

Go to STEP 3 on PAGE 10.

TIP: You can make small

level adjustments by loosening

the bottom lag bolt 09 and

shifting the wall plate until level.

Both lag bolts 09 MUST BE firmly tightened to prevent unwanted

movement of arm assembly 08 . Ensure the wall plate is securely

fastened to the wall before continuing on to the next step.

CAUTION: Avoid potential personal injury or property damage!

Solid Concrete or Concrete Block Installation

STEP 2B Attach Wall Plate

●Mount the arm assembly 08 directly

onto the concrete surface (no surface

covering)

●Minimum solid concrete thickness:

8 in. (20.3 cm)

●Minimum concrete block size:

8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)

CAUTION: Avoid potential personal

injury or property damage! sanus.com

/1172

HeightFinder™

Visit

TIP:

TIP: To calculate your precise wall plate location, check out our HeightFinder at

sanus.com [www.sanus.com/1172].

1POSITION TEMPLATE

CAUTION:

Never drill into the mortar

between blocks.

2DRILL

CAUTION:

3/8 in.

(10 mm)

3 in. (7.5 cm) 4REMOVE COVERS

CAUTION:

Be sure the anchors 11 are seated

ﬂush with the concrete surface.

CAUTION:

3INSERT ANCHORS

5SECURELY TIGHTEN 6INSERT COVERS

TIP: You can make small

level adjustments by loosening

the bottom lag bolt 09 and

shifting the wall plate until level.

Both lag bolts 09 MUST BE firmly tightened to prevent unwanted

movement of arm assembly 08 . Ensure the wall plate is securely

fastened to the wall before continuing on to the next step.

CAUTION: Avoid potential personal injury or property damage!

WARNING: Before starting assembly, verify this part is

undamaged. If damaged, do not return the damaged item to your dealer;

contact Customer Service. Never use damaged parts!

Attach TV to Wall Plate

STEP 3

Hang the TV onto the arm assembly 08 by hooking the top support

on TV bracket 04 as shown.

1HANG YOUR TV

HEAVY! You may

need assistance

with this step.

To lock the TV onto arm assembly 08 , install the securement

screw 12 on the vertical TV bracket 04 using hex key 14 .

Always make sure your securement screw 12 is tightened, so

the TV is securely fastened to the arm assembly 08 .

CAUTION: Avoid potential personal injury or property damage!

3SECURELY TIGHTEN

04 08

Press the bottom of the TV into the arm assembly 08 until you hear

the lock click, securing the TV in place.

2ATTACH

3/32 in.

5/32 in.

10-32 x 1/4 in.

Parts and Hardware for STEP 3

Hex Key

Securement

Screw

NOTE: TV shifts 2.4 in. (6.2 cm) to the right or left when in the home

position. Consider this when selecting the location of your wall mount.

Tabla de contenidos

Otros manuales de Rack y soporte de Sanus

Sanus

Sanus SOA-SBM1 Manual de usuario

Sanus

Sanus VisionMount MT25 Manual de usuario

Sanus

Sanus BSSATM1 Manual de usuario

Sanus

Sanus WSS21 Manual de usuario

Sanus

Sanus WSEDM2 Manual de usuario

Sanus

Sanus SAN55BA Manual de usuario

Sanus

Sanus LR1A Manual de usuario

Sanus

Sanus HTB4B Manual de usuario

Sanus

Sanus MF110 Manual de usuario

Sanus

Sanus CFR21 Series Manual de usuario

Sanus

Sanus SASB1 Manual de usuario

Sanus

Sanus BXT3 Manual de usuario

Sanus

Sanus VLL10 Manual de usuario

Sanus

Sanus LL22 Manual de usuario

Sanus

Sanus VMPL3B Manual de usuario

Sanus

Sanus Trillium 63 Manual de usuario

Sanus

Sanus VisionMount LF228 Manual de usuario

Sanus

Sanus WSWMU Manual de usuario

Sanus

Sanus SLT2 Manual de usuario

Sanus

Sanus FSF207 Manual de usuario

Sanus

Sanus SA405 Manual de usuario

Sanus

Sanus VM300 Manual de usuario

Sanus

Sanus CFR2115 Manual de usuario

Sanus

Sanus VMA401 Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario