Salter Brecknell BS150 Guía de solución de problemas
Salter Brecknell Weighing Products
1000 Armstrong Drive
Fairmont, Minnesota 56031
Toll Free 800-637-0529 · Voice 507-238-8702 · Fax 507-238-8271
Email: sales@salterbrecknell.com
www.salterbrecknell.com
February 2004
©Copyright 2001, 2002 Salter Brecknell Weighing Products
Models BS150 and BS300
Portable Bench Scales
INDICATOR (DP-10)
User and Service Manual
Introduction:
Model BS150 and BS250 are portable scales designed for
today’s tough and demanding remote situations.
Each scale comes with an internal, rechargeable
battery that provides up to
8 hours of continuous operation (non-backlight,
four hours with backlight on).
A built in carry handle allows for easy transport of the scale
to locations where AC power may not be present.
Operation:
With only four keys the scale is simple to operate – simply
turn it on and begin weighing. An automatic off
function saves battery life for extended operation.
On/Zero/Off
The first press turns the scale on.
Units – switches between units of measure.
Count –basic count features.
Zero – functions as zero when the weight applied
is less than 2% of the scale capacity.
“OFF”- Functions when the key is held down
for 3 seconds.
1
INTENTIONALLY LEFT BLANK
14
13
Hold
Used for larger items or unstable loads. Press the hold
key, apply the load for 5 seconds and then remove
the load. The display will hold the weight until the
hold key is pressed again and the scale returns to
normal operation.
Main Scale Features:
•Portable operation or AC operation for full time use.
•Each unit comes with an AC adapter for battery
charging or full time use.
•14 hour charge time.
•Stainless steel shroud.
•Extra durable feet for long term performance.
•An easy to read display with backlight.
•Light weight (33 lbs.) for easy transport.
•Carry handle for ease of movement.
•Heavy duty, steel construction for durability.
•Hold feature for large items or unstable loads.
•Unit switching.
2
INDICATOR FEATURES:
1. Compact Dimensions: 11.3” X 3.5” X 2.7” (290 x 90 x 70
mm)
2. Material: Aluminum
3. Display: 1.0 inch 4 1/2 digital LCD
4. Capacity/Division
CAPACITY DIVISION 1 DIVISION 2 DIVISION 3
2.5/3 kg 0.5 g 1 g 2 g
5/6 kg 1 g 2 g 5 g
10/15 kg 0.002 kg 0.005 kg 0.01 kg
25/30 kg 0.005 kg 0.01 kg 0.02 kg
50/60 kg 0.01 kg 0.02 kg 0.05 kg
100/150 kg 0.02 kg 0.05 kg 0.1 kg
250/300 kg 0.05 kg 0.1 kg 0.2 kg
500/600 kg 0.1 kg 0.2 kg 0.5 kg
1000/1500 kg 0.2 kg 0.5 kg 1 kg
2500/3000 kg 0.5 kg 1 kg 2 kg
5. Accuracy: OIML/NTEP 1000d
6. Power: Rechargeable battery pack/AC adapter (battery
life in continuous mode: 8 hours, no backlight; 4 hours
with backlight on)
7. Power saving (auto shut-off timing selectable: 120
seconds/180 seconds/240 seconds/300 seconds)
8. Operating Temperature: 5~35°C
9. Operating Humidity: 25%~95%RH
10.4 Keys: ON/ZERO/OFF, UNIT, COUNT, HOLD
ON/ZERO/OFF
Switch scale on, zero, or off.
UNIT
Toggle among KG, LB and OZ unit
COUNT
Press count-A 10 pcs. Press count again for
more choices of pieces to add.
When stable indicator is on, place unknown
amount on scale and count is functional. Press
UNIT key to return to normal mode.
HOLD
Press this key to store weight value
3
PIN ASSIGNMENTS FOR THE EXTERNAL CABLE:
DP 10 L/C
Pin 1: (+) Sig. (Green) Pin 1: (+) Sig. (Red)
Pin 2: (+) Exc. (Red) Pin 2: (+) Ex. (Green)
Pin 3: (-) Sig. (White) Pin 3: (-) Sig. (White)
Pin 4: (-) Exc. (Blue) Pin 4: (-) Exc. (Black)
ADAPTOR:
115VAC in; 15V DC out.
PARTS LIST (See diagram on following page.)
Item Qty Name Material
2 1 Load Bridge 98060-2163
3 1 Shroud 98060-2148
4 2 Spacer 98060-2338
5 8 Bolt-Hex 54004-1548
6 4 Nut-Locking 17955-0058
8 1 Weldment Base 98060-2197
11 4 Foot Assembly 98060-2270
12 2 Strip, Locking 98060-2130
13 2 Caplug 98060-2213
14 1 Set Screw 98060-2254
15 8 Washer 1029-80008
28 2 Label 98060-2288
29 1 Decal 1070-11776
30 1 Decal Scale 98060-2312
31 3 Cable Tie 13762-1025
32 AR Loctite 15566-0046
33 1 Users Guide 98060-2262
34 1 Load Cell 98060-2346
35 1 Indicator 98060-2353
36 1 Adapter, AC 816965000906
37 2 Indicator Knob 52731-0015
N/A 1 Battery Pack 816965000890
12
CAP. CALIBRATION
WAY
Kg
SPAN
RANGE
CALIBRATION
WEIGHT
Lb.
SPAN
RANGE
CALIBRATION
WEIGHT
1/4
1000∼
5000 25 kg 910∼
4100 50 lb.
1/2
2000∼
10000 50 kg 1820∼
9100 100 lb.
100 kg
150 kg
Full
4000∼
20000 100 kg 4100∼
18000 200 lb.
1/4
1000∼
5000 100 kg 910∼
4550 200 lb.
1/2
2000∼
10000 250 kg 2270∼
11350 500 lb.
500 kg
600 kg
Full
5000∼
25000 500 kg 4550∼
22500 1000 lb.
1/4
1000∼
5000 250 kg 910∼
4100 500 lb.
1/2
2000∼
10000 500 kg 1820∼
9100 1000 lb.
1000
kg
1500
kg
Full
4000∼
20000 1000 kg 4100∼
18000 2000 lb.
1/4
1000∼
5000 500 kg 910∼
4550 1000 lb.
1/2
2000∼
10000 1000 kg 1820∼
9100 2000 lb.
2500
kg
3000
kg
Full
4000∼
20000 2000 kg 4550∼
22500 5000 lb.
4. Press UNIT key to select weight unit: kg or lb
5. When the weight is stable, press ON/ZERO/OFF key
to start calibrating.
6. The display shows the calibration weight in normal mode.
7. Remove the weight from the platform and the calibration is
finished.
11
11. Error message indication:
A. Overload
B.: Power on zero count too low
C. Power on zero count too high
D. High zero count
E. Low zero count
F. Low battery indication
G. Eprom Error
12. Two calibration weight units: kg / lb
13. Three calibration capacity: 1/4, 1/2, Full
14. Power on zero-setting range: ±10%
15. Zero range: ±2%
16. Three software filter functions: FAST/NORMAL/SLOW
17. Three modes: Normal mode/Setting mode/Internal Auto
Calibration mode
4
Err
0000
0000
Err
ErrL
--
ErrE
KEY DESCRIPTIONS:
HOLD UNIT ON
ZERO
OFF COUNT
1. UNIT:
1) Select weight units: kg, lb., or oz.
2. ON/ZERO/OFF:
1) Power on the indicator.
2) Press and hold this key for 3 seconds to power off.
3) This key is “Zero” feature if load is below 2% of full
capacity or a negative value.
3. HOLD:
1) When the weight is unstable, press this key to hold the
weight value.
2) To release Hold feature, press the HOLD key again.
4. COUNT
1.) Press the count key and the indicator will say “A 10”. For
more samples press the count key additional times.
2.) When the stable indicator comes on the scale should
indicate a count of 10 pieces.
3.) Place an unknown amount on the scale and it will indicate
the count.
4.) To exit the count mode press the “Unit” key.
5
CALIBRATION PROCEDURE
1. Press ON/ZERO/OFF key without releasing, and then press
UNIT key 3 times to enter test mode, the display shows zero
count (1000-6000).
2. Press ON/ZERO/OFF key and display shows “0”.
3. Load the calibration weight. (Note: Please see following table-
calibration weight):
CAP. CALIBRATION
WAY
Kg
SPAN
RANGE
CALIBRATION
WEIGHT
Lb.
SPAN
RANGE
CALIBRATION
WEIGHT
¼1000∼
5000 500 g 910∼
4550 1 lb.
½2000∼
10000 1 kg 1820∼
9100 2 lb.
2.5 kg
3 kg
Full 4000∼
20000 2 kg 4550∼
22500 5 lb.
¼1000∼
5000 2 kg 910∼
4550 2 lb.
½2000∼
10000 5 kg 2270∼
11350 5 lb.
5 kg
6 kg
Full 5000∼
25000 2 kg 4550∼
22500 10 lb.
¼1000∼
5000 2 kg 910∼
4100 5 lb.
½2000∼
10000 5 kg 1820∼
9100 10 lb.
10 kg
15 kg
Full 4000∼
20000 10 kg 4100∼
18000 20 lb.
¼1000∼
5000 5 kg 910∼
4550 10 lb.
½2000∼
10000 10 kg 1820∼
9100 20 lb.
25 kg
30 kg
Full 4000∼
20000 20 kg 4000∼
20000 50 lb.
¼1000∼
5000 10 kg 910∼
4550 20 lb.
½2000∼
10000 20 kg 1820∼
9100 40 lb.
50 kg
60 kg
Full 4000∼
20000 40 kg 4000∼
20000 100 lb.
10 (next page)
FUNCTION SETTINGS
1. A.OFF Time for auto off (120s/180s/240s/300s/off).
2. Unit Weight units (kg/lb./oz.).
3. CAP Capacity (3/6/15/30/60/150/300/600/1500/3000kg).
4. OvL Overload (100/150kg).
5. divS Division (1/1500, 1/3000, 1/6000).
6. Filt Filter (fast, normal, slow).
7. CAL.C Calibration Capacity (1/4, 1/2, full).
8. Hold Hold (Average Hold / Peak Hold).
9. A.H.d.r. Average Hold range.
10. A.H.d.t. Average Hold times.
11. trAn Transfer.
12. t.b.r. Transfer baud rate.
9
6
Outline Drawing 7
8
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Escala de Salter Brecknell
Salter Brecknell
Salter Brecknell B 130 Manual de usuario
Salter Brecknell
Salter Brecknell PS250 Manual de usuario
Salter Brecknell
Salter Brecknell SP series Manual de usuario
Salter Brecknell
Salter Brecknell 405 Manual de usuario
Salter Brecknell
Salter Brecknell C3225 Manual de usuario
Salter Brecknell
Salter Brecknell LPS-150 Manual de usuario
Salter Brecknell
Salter Brecknell SBI-100 Manual de usuario
Salter Brecknell
Salter Brecknell PS-500 Manual de usuario
Salter Brecknell
Salter Brecknell GP100 Manual de usuario
Salter Brecknell
Salter Brecknell MS-20 Manual de usuario
Salter Brecknell
Salter Brecknell PC 150 Manual de usuario
Salter Brecknell
Salter Brecknell GP100 Manual de usuario
Salter Brecknell
Salter Brecknell B220 Manual de usuario
Salter Brecknell
Salter Brecknell HTS-150 Manual de usuario
Salter Brecknell
Salter Brecknell B220 Manual de usuario
Salter Brecknell
Salter Brecknell MS300 Manual de usuario
Salter Brecknell
Salter Brecknell 302 BP Series Manual de uso y cuidado
Salter Brecknell
Salter Brecknell CS-1000 Manual de usuario
Salter Brecknell
Salter Brecknell CS Manual de usuario
Salter Brecknell
Salter Brecknell C3235 Manual de usuario
