Salter Brecknell 402 Manual de usuario
Model 402
Coin Counting Scale
User Manual
POWER SUPPLY
The Salter Brecknell 402 is powered either by 6 - 1.5 V AA alkaline batteries (not included) or
via the mains using a power adapter. To fit the batteries, remove the compartment cover on
the underside of the scale, place the 6 AA batteries in the spaces provided and engage the
cover clip.
The 9 V DC power adapter plugs directly into your AC outlet and into the DC plug socket
mounted on the rear of the scale. The Salter Brecknell 402 automatically switches off after 2
minutes if no weight change is detected.
!WARNING
Use only the AC adapter that comes with the scale. Other adapters may cause damage.
!CAUTION
Avoid installing the scale in areas of direct sunlight and high humidity. Also avoid drafts,
vibrations and dusty conditions.
Do not mix the type of batteries. Replace all batteries at the same time.
If the scale is not to be used for a long period of time, remove all batteries from the battery
compartment to avoid leakage that cause damage to the instrument.
To extend the life of your digital scale, do not drop items to be weighed onto the platform or
overload the scale beyond its rated capacity. Shock-loading and overloading may damage the
load cell and void the warranty. NOTICE:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his/her own expense. 1
Push clips and
pull to remove
com
p
artment lid.
+
-+
-
+
-
+-+-+ -
ON/TARE : Turns scale on, tares item on platter, and returns scale
to zero weight.
OFF : Turns scale off.
UP ARROW : Scrolls up through the display menu to select the
required denomination of coin or weighing mode.
DOWN ARROW : Scrolls down through the display menu to select the
required denomination of coin or weighing mode.
DISPLAY SCREEN : Displays weight / coin values.
Arrows along the bottom and to the right of the screen
show the current operating mode.
SPECIFICATION
Dimensions (scale): 8.25” x 8.25” x 2.0” (210mm x 210mm x 51mm)
Dimensions (weighing platform): 5.3” x 7.9” (135mm x 200mm)
Capacity / Resolution: 5 lb x 0.1 oz
Display method: 4 digit, 7 segment, 7 annunciator LCD display
Power: Adapter: 120 VAC, 60 Hz, 3 Watts input
9 VDC, 100 mA output
Batteries: 6 x 1.5 V AA Alkaline
2
MODES OF OPERATION
The following operating modes are available and can be selected by pressing the up/down
arrow TOGGLE key to select the various coin denominations and weighing mode.
Weighing Mode (no annunciators) 1¢ Coin Counting Mode
Displays the weight in lb/oz units.
5¢ Coin Counting Mode 10¢ Coin Counting Mode
25¢ Coin Counting Mode 50¢ Coin Counting Mode
$1 Coin Counting Mode
3
1c 5c 10c 25c
50c
$1
1c 5c 10c 25c
50c
$1
1c 5c 10c 25c
50c
$1
1c 5c 10c 25c
50c
$1
1c 5c 10c 25c
50c
$1
1c 5c 10c 25c
50c
$1
1c 5c 10c 25c
50c
$1
When the Salter Brecknell 402 is initially switched on, the scale operation will default to
weighing mode. Weighing mode can also be selected by pressing the up/down arrow
TOGGLE keys, until no annunciator is displayed.
Press the ON/TARE key to
switch on the scale and/or
to zero the display.
Place weight onto scale.
The weight will be displayed
in lbs-oz.
CAUTION – To extend the life of your scale, do not drop items to be weighed onto the
platform or overload the scale beyond its rated capacity. Shock-loading and overloading may
damage the scale and void the warranty.
ENTERING A TARE WEIGHT
Place item(s) to be tared onto
the scale.
Press ON/TARE Key.
The tare function operates in all coin counting modes.
4
1lb
CURRENCY CHANGE INSTRUCTION AND INFORMATION
The Salter Brecknell 402 currency information is contained in an EPROM module. This is a
pre-programmed memory device that is mounted on a plug in the printed circuit board. In the
event of a coin change, contact the Salter Brecknell Sales Department at the address
below for information regarding new EPROM modules.
The EPROM rate chip is positioned on the underside of the coin scale. Remove the lid by
pushing the catch and pulling upwards.
The EPROM is situated directly beneath the lid. To remove, gently ease the chip from socket.
When inserting a new chip, ensure that the replacement is installed the correct way into the
socket. Insert the chip into place by pushing down gently. Replace the compartment lid and
your coin scale will be ready for use.
Salter Brecknell Weighing Products
1000 Armstrong Drive
Fairmont, Minnesota 56031
Toll Free 800-637-0529 · Voice 507-238-8702 · Fax 507-238-8271
Email: [email protected]
www.salterbrecknell.com
September 2003
©Copyright 2001, 2002 Salter Brecknell Weighing Products
Pull EPROM gently
upwards to remove
chi
p
from sockets.
Push catch and
lift compartment
lid
5
Tabla de contenidos
Otros manuales de Escala de Salter Brecknell
Salter Brecknell
Salter Brecknell S122 Manual de usuario
Salter Brecknell
Salter Brecknell S122 Manual de usuario
Salter Brecknell
Salter Brecknell 405 Manual de usuario
Salter Brecknell
Salter Brecknell CS Manual de usuario
Salter Brecknell
Salter Brecknell GP100 Manual de usuario
Salter Brecknell
Salter Brecknell 7010SB Manual de usuario
Salter Brecknell
Salter Brecknell LPS-400 Manual de usuario
Salter Brecknell
Salter Brecknell MS-20 Manual de usuario
Salter Brecknell
Salter Brecknell TME0221 Instrucciones de instalación
Salter Brecknell
Salter Brecknell CS-1000 Manual de usuario
Salter Brecknell
Salter Brecknell B220 Manual de usuario
Salter Brecknell
Salter Brecknell C3255 Manual de usuario
Salter Brecknell
Salter Brecknell Pegasus Floor Scale Manual de usuario
Salter Brecknell
Salter Brecknell HTS-150 Manual de usuario
Salter Brecknell
Salter Brecknell B220 Manual de usuario
Salter Brecknell
Salter Brecknell PS250 Manual de usuario
Salter Brecknell
Salter Brecknell 405 Manual de usuario
Salter Brecknell
Salter Brecknell EG1500 Manual de instalación
Salter Brecknell
Salter Brecknell B 130 Manual de usuario
Salter Brecknell
Salter Brecknell B 120 Manual de usuario
