Ruijie RG-SAP185-SP-W Manual de instalación y funcionamiento

Ruijie RG-SAP185-SP-W Access Point

Hardware Installation and Reference Guide

Document Version: V1.1

Date: August 16, 2023

Networks

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or

commercial use of this document or any portion of this document, in any form or by any

means, without the prior written consent of Ruijie Networks is prohibited.

Trademark and are owned by Ruijie

Networks.

All other trademarks or registered trademarks mentioned in this document are owned by

their respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and

terms. Some or all of the products, services or features described in this document may

not be within the scope of your purchase or use. Unless otherwise agreed in the contract,

Ruijie Networks does not make any express or implied statement or guarantee for the

content of this document.

Due to product version upgrades or other reasons, the content of this document will be

updated from time to time. Ruijie Networks reserves the right to modify the content of

the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy

and will not shoulder any responsibility for losses and damages caused due to content

omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: service_rj@ruijienetworks.com

Live Chat: https://www.ruijienetworks.com/rita

Conventions

1. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or

followed can result in data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed

can result in function failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or

followed will not lead to serious consequences.

Specification

An alert that contains a description of product or version support.

2. Note

The manual offers configuration information (including model, port type and command

line interface) for indicative purpose only. In case of any discrepancy or inconsistency

between the manual and the actual version, the actual version prevails.

Contents

Preface.................................................................................................................................................. I

1 Product Introduction....................................................................................................................... 1

1.1 Overview ...................................................................................................................................1

1.2 Product Appearance ................................................................................................................1

1.3 Package Contents.....................................................................................................................5

1.4 Technical Specifications...........................................................................................................5

1.4.1 Dimensions and Weight...............................................................................................5

1.4.2 Radio Specifications .....................................................................................................5

1.4.3 Port Specifications........................................................................................................7

1.4.4 Power Supply and Consumption ................................................................................8

1.4.5 Environment and Reliability ........................................................................................8

1.5 LED and Button.........................................................................................................................9

2 Preparing for Installation.............................................................................................................. 11

2.1 Safety Precautions..................................................................................................................11

2.1.1 General Safety Precautions .......................................................................................11

2.1.2 Handling Safety ..........................................................................................................11

2.1.3 Electric Safety..............................................................................................................12

2.1.4 Storage Security .........................................................................................................12

2.2 Installation Environment Requirements..............................................................................13

2.2.1 Bearing Requirements...............................................................................................13

2.2.2 Ventilation Requirements..........................................................................................13

2.2.3 Space Requirements ..................................................................................................13

2.2.4 Temperature/Humidity Requirements.....................................................................13

2.2.5 Cleanliness Requirements.........................................................................................14

2.2.6 Anti-interference Requirements ...............................................................................15

2.2.7 Lightning Protection Requirements .........................................................................15

2.2.8 Installation Site Requirements..................................................................................16

2.3 Tools ........................................................................................................................................16

3 Installation ..................................................................................................................................... 17

3.1 Installation Procedure ...........................................................................................................17

3.2 Before You Begin....................................................................................................................18

3.3 Precautions.............................................................................................................................18

3.4 Installing the Device...............................................................................................................19

3.4.1 Installing the AP in a 86 mm Junction Box...............................................................19

3.4.2 Removing the AP........................................................................................................22

3.5 Connecting Cables .................................................................................................................23

3.6 Bundling Cables......................................................................................................................23

3.6.1 Precautions .................................................................................................................23

3.6.2 Bundling Steps............................................................................................................24

3.7 Checklist after Installation.....................................................................................................24

3.7.1 Checking the AP..........................................................................................................24

iii

3.7.2 Checking Cable Connections.....................................................................................24

3.7.3 Checking the Power Supply.......................................................................................24

4 Verifying the Operating Status..................................................................................................... 25

4.1 Establishing the Configuration Environment ......................................................................25

4.2 Powering on the AP................................................................................................................25

4.2.1 Checklist Before Power-on ........................................................................................25

4.2.2 Checking the Environment after Power-on .............................................................25

5 Monitoring and Maintenance....................................................................................................... 26

5.1 Monitoring ..............................................................................................................................26

5.1.1 LED...............................................................................................................................26

5.1.2 CLI Commands ...........................................................................................................26

5.2 Remote Maintenance.............................................................................................................26

5.3 Hardware Maintenance .........................................................................................................26

6 Troubleshooting ............................................................................................................................ 27

6.1 General Troubleshooting Procedure....................................................................................27

6.2 Common Troubleshooting Procedures................................................................................27

6.2.1 The Ethernet Port Does Not Work After the Ethernet Cable Is Plugged in...........27

6.2.2 The LED Is Off for a Long Time .................................................................................27

6.2.3 The LED Is Solid Red...................................................................................................28

6.2.4 The LED Is Solid Green...............................................................................................28

6.2.5 The LED Keeps Blinking Green at an Interval of 0.2s for a Long Time ..................28

6.2.6 The LED Keeps Blinking Red at an Interval of 1s for a Long Time .........................28

6.2.7 The Wireless Signal Cannot Be Found......................................................................28

7 Appendix ........................................................................................................................................ 29

7.1 Connectors and Media...........................................................................................................29

7.2 Cabling Recommendations in Installation...........................................................................31

Hardware Installation and Reference Guide Product Introduction

1 Product Introduction

1.1 Overview

The RG-SAP185-SP-W is a dual-band 802.11ax-compliant access point (AP) released by

Ruijie Networks for indoor scenarios in the general education, higher education, hotel,

office and dormitory. With simple and beautiful appearance design, the RG-SAP185-SP-W

can be deployed without damaging the wall decoration. It is the optimal choice for

wireless network deployment in hotels and dormitories.

The AP adopts the latest 802.11ax protocol and dual-band technology. The 2.4 GHz Radio

Frequency Processing Unit (RPU) provides a maximum access rate of 574 Mbps, and the

5 GHz RPU provides a maximum access rate of 2.402 Gbps. In this way, this AP can

provide a maximum access rate of 2.976 Gbps, which eliminates the bottleneck in

wireless performance. The RG-SAP185-SP-W provides two wired ports, including one

1000 Mbps LAN port and one 1000 Mbps uplink port, and two pass-through ports for

wired access. The design of the AP considers factors such as wireless network security,

radio control, mobile access, Quality of Service (QoS), and seamless roaming. Working

with Ruijie wireless access controllers (AC), the AP implements user data forwarding,

security, and access control.

The RG-SAP185-SP-W supports local power supply and power over Ethernet (PoE).

Customers can flexibly select the power supply mode based on the site environment.

1.2 Product Appearance

The RG-SAP185-SP-W has two radio connectors and two Ethernet ports. The Ethernet

ports on the rear support 802.3af/at-compliant PoE. It also has one micro USB console

port, one Reset button, and two pass-through phone ports compatible with RJ11. The

following figures show the product appearance.

Hardware Installation and Reference Guide Product Introduction

Figure 1-1Front View

Figure 1-2Right Side View

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Ruijie

Ruijie

Ruijie RG-AP680-AR Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP180 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP220 Series Manual de usuario

Ruijie

Ruijie RG-AP840-I Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie Reyee RG-RAP6260 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP630 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-RAP1200 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP840-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP820-L(V2) Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP110-L Manual de usuario

Ruijie

Ruijie RG-AP820-I Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de usuario

Ruijie

Ruijie RG-AP880-AR Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP810-I Manual de instalación y funcionamiento

Ruijie

Ruijie RG-MAP852-SF-S Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP180 Series Manual de usuario

Ruijie

Ruijie RG-AP880-L Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-RAP52-OD Manual de instalación y funcionamiento

Ruijie

Ruijie RG-AP180 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-WLAN Series Manual de instalación

Ruijie

Ruijie RG-AP630 Directional Manual de usuario

Ruijie

Ruijie RG-AP110-L Manual de instalación y funcionamiento

Ruijie

Ruijie RG-MAP852-SF-M Manual de instalación y funcionamiento

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario