Ruijie RG-ES1 Series Manual de instalación y funcionamiento

Ruijie RG-ES1 Series Switches

Hardware Installation and Reference Guide

Document Version: V1.0

Date: 2022.06.21

All rights are reserved in this document and this statement.

Without the prior written consent of Ruijie Networks, any organization or individual shall not reproduce, extract,

back up, modify, or propagate the content of this document in any manner or in any form, or translate it into

other languages or use some or all parts of the document for commercial purposes.

,, and other Ruijie networks logos

are trademarks of Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their respective

owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms, and some or

all of the products, services, or features described in this document may not be available for you to purchase or

use. Except for the agreement in the contract, Ruijie Networks makes no explicit or implicit statements or

warranties with respect to the content of this document.

The content of this document will be updated from time to time due to product version upgrades or other

reasons, Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.

This manual is designed merely as a user guide. Ruijie Networks has tried its best to ensure the accuracy and

reliability of the content when compiling this manual, but it does not guarantee that the content of the manual is

completely free of errors or omissions, and all the information in this manual does not constitute any explicit or

implicit warranties.

Preface

Intended Audience

This document is intended for:

⚫Network engineers

⚫Technical support and servicing engineers

⚫Network administrators

Technical Support

⚫The official website of RuijieReyee: https://www.ruijienetworks.com/products/reyee

⚫TechnicalSupportWebsite:https://www.ruijienetworks.com/support

⚫Case Portal:https://caseportal.ruijienetworks.com

⚫Community: https://community.ruijienetworks.com

⚫Technical Support Email: [email protected]

Conventions

1. Signs

This document also uses signs to indicate some important points during the operation. The meanings of these

signs are as follows:

Caution

Analert that calls attention to safety instruction that if not understood or followed can result in personal injury.

Warning

An alert that calls attention to important rules and information that if not understood or followed can result in

data loss or equipment damage.

Note

An alert that calls attention to essential information that if not understood or followed can result in function

failure or performance degradation.

Instruction

An alert that contains additional or supplementary information that if not understood or followed will not lead to

serious consequences.

Specification

An alert that contains a description of product or version support.

2. Note

This manual provides installation steps, troubleshooting, technical specifications, and usage guidelines for

cables and connectors. It is intended for users who want to understand the above and have extensive

experience in network deployment and management, and assume that users are familiarwith related terms and

concepts.

Hardware Installation and Reference Guide Overview

1 Overview

1.1 Introduction

Video surveillance has been widely popularized, and more and higher requirements are raised for surveillance

security switches that are indispensable for video data transmission. Ruijie launches the Reyee RG-ES1 Series

to provide customers with next-generation unmanaged surveillance security switches that feature diversified

specifications, stable quality, and high-costperformance.

The RG-ES1 series switches include the following models:

Model

10/100Base-TX

Auto-sensing Ethernet

Port

10/100/1000Base-T

Auto-sensing Ethernet Port

1000Base-X

SFP Port

Console

Port

RG-ES106D-P

6（Ports 1-4 support

PoE/PoE+）

N/A

RG-ES110D-P

8（Ports 1-8 support

PoE/PoE+）

N/A

RG-ES110GDS-P

N/A

8（Ports 1-8 support

PoE/PoE+）

N/A

RG-ES116G

N/A

RG-ES124GD

N/A

RG-ES118S-LP

16（Ports 1-16support

PoE/PoE+）

2(Combo)

N/A

RG-ES118GS-P

N/A

16（Ports 1-16support

PoE/PoE+）

N/A

RG-ES126S-LP

24（Ports 1-24 support

PoE/PoE+）

1(Combo)

N/A

Hardware Installation and Reference Guide Overview

1.2 RG-ES106D-P

1.2.1 Package Contents

Table 1-1 Package Contents

Item

Quantity

RG-ES106D-P Host

Power Adapter

Power Cord

Quick Start Guide

Warranty Card

Instruction

The preceding table lists items delivered in normal cases. The actually delivered items may vary with the

contract. Carefully check your goods against the package contents or contract. Contact the seller if you have

any questions or find any errors.

1.2.2 Product Appearance

RG-ES106D-P provides 6 10/100Base-TX auto-sensing Ethernet ports on the front panel, and a port mode

switch-over button, a system status LED, a power socket and a grounding pole on the back panel.

Figure 1-1 Appearance of RG-ES106D-P

1.2.3 Ports - Front Panel

Figure 1-2 shows the front panel of an RG-ES106D-P switch. For the detailed meanings of numbers 1 to 4, see

the following table.

Hardware Installation and Reference Guide Overview

Figure 1-2 Front Panel of RG-ES106D-P

Item

Description

Copper port status indicator

Copper port status indicator. The statuses are as follows:

Solid green: The port is connected at 10/100 Mbps.

Blinking green: The port is receiving or sending traffic at 10/100

Mbps.

Off: The port is not connected.

PoE status indicator

PoE status indicatorfor ports 1-4. The statuses are as follows:

Solid green: PoE is operational.

Off: PoE does not supply power.

RJ-45 10/100Base-TX PoE port

10/100Base-TX adaptive Ethernet port that supports PoE power supply.

The copper port uses an RJ45 connector.

RJ-45 10/100Base-TX

auto-sensing Ethernet port

10/100Base-TX adaptive Ethernet port. The copper port uses an RJ45

connector.

1.2.4 Ports - Rear Panel

Figure 1-3 shows the rear panel of an RG-ES106D-P switch. For detailed meanings of numbers 1 to 4, see the

following table.

Figure 1-3 Back Panel of RG-ES106D-P

Hardware Installation and Reference Guide Overview

Item

Description

Port mode

switch-over button

Support switchover in three modes:

Left：Flow Control On

Middle: Flow Control Off

Right: Port Isolation. When this mode is enabled, ports 1-4 are isolated from

each other, but can communicate with ports 5-6.

System status

indicator (PWR)

System status indicator. The statuses are as follows:

Solid green: The system is operational.

Off: The switch is not powered on.

DC power socket

Used to Connect the DC power adapter（51 VDC/1.25 A）

Grounding pole

Used to fasten the ground cable.

1.2.5 Technical Specifications

Table 1-2 Technical Specifications of an RG-ES106D-P Switch

Product Model

RG-ES106D-P

Ports

6 10/100Base-TX auto-sensing Ethernet ports, ports 1-4 support PoE/PoE+.

Power Supply

AC input

Rated voltage range: 100 VAC to 240 VAC

Maximum voltage range: 90 VAC to 264 VAC

Frequency: 50/60Hz

Rated current: 1.5 A

Adapter output

Rated voltage range: 51 VDC

Rated current range: 1.25 A

PoE

Support PoE and PoE+.

Ports 1-4 are PoE/PoE+-capable with the maximum power output of 30W per port. Ports

5-6 do not support PoE or PoE+.

The overall maximum output power of PoE/PoE+ is 58W.

Power

Consumption

Less than 7W with no PoE load

Less than 67W with PoE full load

Operating

Temperature

0°C to 45°C(32°F to 113°F)

Hardware Installation and Reference Guide Overview

Storage

Temperature

-40°C to 70°C(-40°F to 158°F)

Operating

Humidity

10% to 90% RH (non-condensing)

Storage Humidity

5% to 95% RH (non-condensing)

Port Mode

Support switchover in three modes:

Flow Control On

Flow Control Off

Port Isolation. When this mode is enabled, ports 1-4 are isolated from each

other, but can communicate with ports 5-6.

Fan

Not supported

Temperature

Warning

Not supported

Accessing Optical

Module

Information

Not supported

EMC

GB/T 9254.1-2021

EN 55032:2015

EN 55035:2017

EN IEC61000-3-2:2019

EN 61000-3-3:2013

Draft ETSI EN 300 386 V2.2.0 (2020-10)

Security

Standards

GB 4943.1-2011

EN 62638-1

Earth Leakage

Current

≤1.5mA

Dimensions

(W x D x H)

100 mm x 100 mm x 26 mm (3.94 in. x 3.94 in. x 1.02 in.)

Weight

(With Package)

0.66 kg (1.46 lbs)

Caution

●The RG-ES106D-P switch may cause radio interference in the living environment.

●It is not recommended to deploy RG-ES106D-P switch in places where children may appear.

Hardware Installation and Reference Guide Overview

1.2.6 Heat Dissipation Solution

The RG-ES106D-Padopts natural heat dissipation, thereby ensuring normal function of the device. Maintain a

minimum clearance of 100 mm (3.94 in.) around the device. It is recommended to clean the device once every

3 months to avoid dust from blocking vents.

1.3 RG-ES110D-P

1.3.1 Package Contents

Table 1-3 Package Contents

Item

Quantity

RG-ES110D-P Host

Power Adapter

Power Cord

Quick Start Guide

Warranty Card

Instruction

The preceding table lists items delivered in normal cases. The actually delivered items may vary with the

contract. Carefully check your goods against the package contents or contract. Contact the seller if you have

any questions or find any errors.

1.3.2 Product Appearance

RG-ES110D-P provides 8 10/100Base-TX auto-sensing Ethernet ports, 2 10/100/1000Base-T auto-sensing

Ethernet ports, and LED indicators on the front panel, and a power socket, a port mode switch-over button and

a grounding pole on the back panel.

Figure 1-4 Appearance of RG-ES110D-P

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Ruijie

Ruijie

Ruijie RG-S8600 Series Manual de usuario

Ruijie

Ruijie XS-S1960-10GT2SFP-P-H Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6250-48XS8CQ Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6100 Series Cómo utilizar

Ruijie

Ruijie RG-S5750-E Series Manual de instalación y funcionamiento

Ruijie

Ruijie 5310-E Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-NBS3200 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6220-H Series Manual de usuario

Ruijie

Ruijie RG-S8600E Series Manual del operador

Ruijie

Ruijie RG-S3760E Series Manual de usuario

Ruijie

Ruijie RG-S6920-4C Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S1920 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S2910-24GT4SFP-UP-H Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6110 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-CS86-20XS Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-CS88-08 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S2900G-E Series Manual de usuario

Ruijie

Ruijie RG-N18000-E Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-NIS3100 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S2924GT/8SFP-XS-P Manual de usuario

Ruijie

Ruijie RG-S6580-24DC8QC Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-ES126S-LP V2 Manual de usuario

Ruijie

Ruijie XS-S1930J Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-ES05 Series Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manual de usuario