Ruijie RG-N18000-E Series Manual de instalación y funcionamiento

Ruijie RG-N18000-E Series Switches

Hardware Installation and Reference Guide

Document Version: V1.04

Date: 2023.04.23

Networks

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or commercial

use of this document or any portion of this document, in any form or by any means, without

the prior written consent of Ruijie Networks is prohibited.

Trademark and are owned by Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their

respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms.

Some or all of the products, services or features described in this document may not be within

the scope of your purchase or use. Unless otherwise agreed in the contract, Ruijie Networks

does not make any express or implied statement or guarantee for the content of this

document.

Due to product version upgrades or other reasons, the content of this document will be

updated from time to time. Ruijie Networks reserves the right to modify the content of the

document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and

will not shoulder any responsibility for losses and damages caused due to content omissions,

inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: service_rj@ruijienetworks.com

Live Chat: https://www.ruijienetworks.com/rita

Conventions

1. Conversions

Convention

Description

Bold font

Commands, command options, and keywords are in bold

font.

Italic font

Arguments for which you supply values are in italic font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated

by vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and

separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for

consecutive 1- n times.

Double slashes at the beginning of a line of code indicate

a comment line.

2. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or

followed can result in data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed can

result in function failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or

followed will not lead to serious consequences.

Specification

An alert that contains a description of product or version support.

3. Note

The manual offers configuration information (including model, port type and command line

interface) for indicative purpose only. In case of any discrepancy or inconsistency between the

manual and the actual version, the actual version prevails.

Hardware Installation and Reference Guide Product Overview

1 Product Overview

RG-N18000-E series switches are next-generation core switches developed by Ruijie Networks

independently. The switch adopts the Clos architecture and supports dual supervisor modules

and power supply redundancy.

The RG-N18010-E: supporting dual supervisor modules and providing eight service module

slots, four switch fabric module slots, four power supply module slots, and two fan module

slots;

The RG-N18014-E: supporting dual supervisor modules and providing 12 service module

slots, four switch fabric module slots, four power supply module slots, and two fan module

slots;

1.1 RG-N18010-E

Table 1-1 Technical Specifications

Model

RG-N18010-E

Module Slot

Two supervisor module slots, eight service module slots, four switch

fabric module slots, four power supply module slots, and two fan

module slots

Supervisor Module

M18000E-CM

Service Module

M18000E-48GT4XS-XA

M18000E-48SFP4XS-XA

M18000E-24GT8SFP8XS-XA

M18000E-32XS-XB

M18000E-52XS-XB

M18000E-12CQ-XB

M18000E-8SFG

M18000E-8SFX

Hardware Installation and Reference Guide Product Overview

Switch Fabric Module

M18010E-FE-X I

M18000E-FE-X II

Supervisor Module

Redundancy

Supported

Hot Swapping

Supported

Power Supply

Module

RG-PA1600I:

90 V AC to 180 V AC, power: 1200 W

180 V AC to 264 V AC, power: 1600 W

RG-PA600I:

90 V AC to 180 V AC, power: 600 W

180 V AC to 264V V AC, power: 600 W

RG-PD1600I: –40 V DC to –75 V DC, power: 1400 W

RG-PD600I: –40 V DC to –75 V DC, power: 600 W

Power Supply

Redundancy

The power supply redundancy of the same model is supported

Fan Module

M10C-FAN

EMC Certification

GB/T 9254.1

Safety Regulation

Compliance

GB 4943.1

Altitude

Long-term operation altitude: 3000 m at 50°C (122°F). The

temperature decreases by 1°C as the altitude ranging from 3,000 m

to 5,000 m increases by 200 m.

Max operating altitude: 5,000 m

Max storage altitude: 5,000 m

Operating

Temperature

0°C to 50°C (32°F to 122°F)

Hardware Installation and Reference Guide Product Overview

Storage Temperature

–40°C to +70°C (–40°F to +158°F)

Operating Humidity

10% to 90% RH (non-condensing)

Storage Humidity

5% to 95% RH (non-condensing)

MTBF

342,000 hours

Noise

Less than 60 dB at 35°C (95°F)

Less than 75 dB at 50°C (122°F)

Weight

Net weight: 43.55 kg (96.01 lbs)

Dimensions

(W x D x H)

Cable management brackets excluded: 442.5 mm x 560 mm x 442

mm (17.42 in. x 22.05 in. x 17.40 in.), 10U

Cable management brackets included: 442.5 mm x 662 mm x 442 mm

(17.42 in. x 26.06 in. x 17.40 in.), 10U

Note

The weight only includes that of the empty chassis and fans. The weight of the whole

device is subject to that of the modules selected.

In a domestic environment, this product may cause radio interference in which case the

user may be required to take adequate measures.

This device is not suitable for use in locations where children are likely to be present.

Risk of electric shock. The fuse is on the midline of the grid power supply. Cut off

the grid power supply to disconnect each phase of the conductor.

Product Appearance

The hardware system of the RG-N18010-E switch is composed of the chassis, the power system,

modules and the cooling system.

The power system provides four power supply slots and supports N+N power supply

redundancy. Users are recommended to configure redundancy for the power supplies.

The RG-N18010-E switch provides two supervisor module slots, eight service module slots

and four switch fabric module slots. The supervisor modules support 1+1 redundancy. You

are advised to configure redundancy for the supervisor modules. You may choose different

service modules as needed.

The heat dissipation system is composed of fan trays, which are at the back of the chassis.

Hardware Installation and Reference Guide Product Overview

Figure 1-1 Appearance of the RG-N18010-E Switch

Front Panel

The front panel of the RG-N18010-E switch is shown in Figure 1-2.

Hardware Installation and Reference Guide Product Overview

Figure 1-2 Front Panel of the RG-N18010-E Switch

Note

①Operation and maintenance LED

②Service module slot

③Cable management brackets

④Anti-static wrist strap

Table 1-2 Operation and Maintenance LED

LED

Panel ID

Status

Meaning

Supervisor

module 1 status

LED

CM1

Off

The module is not powered on.

Solid red

The module is faulty.

Blinking

green

Initialization is in progress. Continuous

blinking indicates errors.

Solid green

Initialization is complete. The module is

operational.

Supervisor

module 2 status

LED

CM2

Off

The module is not powered on.

Solid red

The module is faulty.

Blinking

green

Initialization is in progress. Continuous

blinking indicates errors.

Hardware Installation and Reference Guide Product Overview

Solid green

Initialization is complete. The module is

operational.

Switch fabric

module status LED

Off

The module is not powered on or is not in the

position.

Solid green

The module is operational.

Solid red

The modules is faulty.

Power status LED

Power

Off

The power supply module is not in the

position.

Solid green

The power supply module is operational.

Solid red

The power supply module is faulty or the

input power cord is unplugged.

Fan status LED

Fan

Solid green

The fan module is operational.

Solid yellow

The fan module is not in the position or

removed.

Solid red

The fan module is faulty.

Back Panel

The back panel of the RG-N18010-E switch is shown in Figure 1-3.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Ruijie

Ruijie

Ruijie RG-CS83-PD Series Manual de usuario

Ruijie

Ruijie RG-N18000-X Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-NBS5200 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S5310-E Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6250-48XS8CQ Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6580-48CQ8QC Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6510-48VS8CQ Manual de instalación y funcionamiento

Ruijie

Ruijie RG-SF2920U Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-IS2700-P Series Manual de instalación

Ruijie

Ruijie RG-EG210G-P Manual de usuario

Ruijie

Ruijie RG-SF2920 Series Manual de instalación y funcionamiento

Ruijie

Ruijie XS-S1960-48GT4SFP-H Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6510-4C Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-ES126S-LP Manual de usuario

Ruijie

Ruijie RG-NBS1805C-P Manual de usuario

Ruijie

Ruijie RG-S6100 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6920-4C Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S3760E Series Manual de usuario

Ruijie

Ruijie RG-S2900 Series Manual de usuario

Ruijie

Ruijie RG-IF2920U-12GT1XS Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-NBS5100 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-IF2920U-12GT1XS-DC Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6510 Series Manual de instalación y funcionamiento

Ruijie

Ruijie S8600E Series Instrucciones de funcionamiento

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manual de usuario