Ruijie RG-S1920 Series Manual de instalación y funcionamiento

Ruijie RG-S1920 Series Switches

Hardware Installation and Reference Guide V1.11

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

This manual describes the functional and physical features and provides the device installation steps, hardware

troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: [email protected]

Skype: [email protected]

Related Documents

Documents

Description

Configuration Guide

Describes network protocols and related mechanisms that

supported by the product, with configuration examples.

Command Reference

Describes the related configuration commands, including

command modes, parameter descriptions, usage guides, and

related examples.

Symbol Conventions

The symbols used in this document are described as below:

This symbol brings your attention to some helpful suggestions and references.

This symbol means that you must be extremely careful not to do some things that may damage the device or cause

data loss

Hardware Installation and Reference Guide

Product Overview

1Product Overview

Table 1-1 RG-S1920

Model

10/100 Base-T

Auto-sensing

Ethernet Port

10/100/1000

Base-T

Auto-sensing

Ethernet Port

1000Base-X SFP

Port

Console Port

RG-S1920-18GT2SFP

RG-S1920-24GT4SFP/2GT

4 (Ports 25-26 are

Combo ports)

The SPF ports are downward compatible with 100Base-FX. The application of 100Base-FX requires 100M SFP

modules.

1000Base-T is compatible with 100Base-TX and 10Base-T in the downlink direction.

1.1 RG-S1920-18GT2SFP

Technical Specifications

Model

RG-S1920-18GT2SFP

CPU

Built-in CPU, single-core processor, 500MHz

Flash Memory

32MB

SDRAM

DDRIII 256MB

Optical Module

For details, see Appendix B. (Copper cables are not supported.)

The supported module type may change at any time. Consult us for the latest information.

SFP Port

Supports 1000Base-X and 100Base-FX modules.

Power Supply

AC input

Rated voltage range: 100V to 240V

Maximum voltage range: 90V to 264V

Frequency: 50/60 Hz

Rated current: 0.6A

Power cord specification: 10A power cord

EEE

Supported

PoE

Not supported

Power

Consumption

< 17 W

Operating

Temperature

-5°C to 55°C (23°F to 131°F)

Storage

Temperature

-40°C to 70°C (-40°F to 158°F)

Hardware Installation and Reference Guide

Product Overview

Operating Humidity

10% to 90% RH

Storage Humidity

5% to 95% RH

Fan

Not supported

Temperature

Warning

Not supported

Collecting

Information of SFP

Modules

Not supported

EMC Standards

GB9254-2008

Security Standards

GB4943-2011

Input Leakage

Current

≤1.5mA

Dimensions

(W x D x H)

440 mm x 189 mm x 43.6 mm

Weight

2.4 kg (with package)

The RG-S1920-18GT2SFP switch is a class A product. In a domestic environment, this product may cause radio

interference in which case the user may be required to take adequate measures.

The label indicates that you should not touch the device when it operates in environments of more than 50°C

(122°F).

Product Appearance

On the front panel, the RG-S1920-18GT2SFP Ethernet switch provides 18 10/100/1000Base-T Ethernet ports, 2 SFP

ports and 1 Console port. On the back panel, it provides AC power ports.

Figure 1-1 Appearance of RG-S1920-18GT2SFP

Front Panel

Figure 1-2 Front Panel of RG-S1920-18GT2SFP

Hardware Installation and Reference Guide

Product Overview

Note

1. System status LED

2. Console port

3. 10/100/1000Base-T auto-sensing Ethernet port

4. Copper port status LED

5. Copper port status LED

6. 10/100/1000Base-T auto-sensing Ethernet port

7. SFP port status LED

8. 1000Base-X SFP port

Back Panel

Figure 1-3 Back Panel of RG-S1920-18GT2SFP

Note

1. Grounding pole

2. Vent

3. Power cord retention clip

4. AC power port

Heat Dissipation

The RG-S1920-18GT2SFP adopts natural heat dissipation, thereby ensuring normal function of the device in the specified

environment. 10 cm distance space should be reserved at both sides and the back plane of the cabinet to allow air

circulation. It is recommended to clean the device once every 3 months to avoid dust from blocking vents.

LEDs

LED

Panel Identification

State

Meaning

Off

The switch is not receiving power.

Blinking green

The system is being initialized.

Continuous blinking indicates errors.

System status LED

Status

Solid green

The switch is operational.

Off

The port is not connected.

1000Mbps RJ-45 port

status LED

1-18

Solid green

The port is connected at 10/100/1000 Mbps.

Hardware Installation and Reference Guide

Product Overview

Blinking green

The port is receiving or transmitting traffic at

10/100/1000 Mbps.

Off

The port is not connected.

Solid green

The port is connected at 100/1000 Mbps.

1000Mbps SFP port

status LED

19F-20F

Blinking green

The port is receiving or transmitting traffic at

100/1000 Mbps.

1.2 RG-S1920-24GT4SFP/2GT

Technical Specifications

Model

RG-S1920-24GT4SFP/2GT

CPU

Built-in CPU, single-core processor, 500MHz

Flash Memory

32MB

SDRAM

DDRIII 256MB

Optical Module

For details, see Appendix B. (Copper cables are not supported.)

The supported module type may change at any time. Consult us for the latest information.

SFP Port

Supports 1000Base-X and 100Base-FX modules.

Power Supply

AC input

Rated voltage range: 100 V to 240 V

Maximum voltage range: 90 V to 264 V

Frequency: 50/60 Hz

Rated current: 0.6 A

Power cord specification: 10 A power cord

EEE

Supported

PoE

Not supported

Power

Consumption

< 22W

Operating

Temperature

-5°C to 55°C (23°F to 131°F)

Storage

Temperature

-40°C to 70°C (-40°F to 158°F)

Operating Humidity

10% to 90% RH

Storage Humidity

5% to 95% RH

Fan

Not supported

Temperature

Warning

Not supported

Collecting

Not supported

Hardware Installation and Reference Guide

Product Overview

Information of SFP

Modules

EMC Standards

GB9254-2008

Security Standards

GB4943-2011

Input Leakage

Current

≤1.5 mA

Dimensions

(W x D x H)

440 mm x 189 mm x 43.6 mm

Weight

2.4 kg (with package)

The RG-S1920-24GT4SFP/2GT switch is a class A product. In a domestic environment, this product may cause

radio interference in which case the user may be required to take adequate measures.

The label indicates that you should not touch the device when it operates in environments of more than 50°C

(122°F).

Product Appearance

On the front panel, the RG-S1920-24GT4SFP/2GT Ethernet switch provides 24 10/100/1000Base-T Ethernet ports, 2

1000M Combo ports, 2 1000M SFP ports and 1 Console port. On the back panel, it provides AC power ports.

Figure 1-4 Appearance of RG-S1920-24GT4SFP/2GT

Front Panel

Figure 1-5 Front Panel of RG-S1920-24GT4SFP/2GT

Note

1. System status LED

2. Console port

3. 10/100/1000Base-T auto-sensing Ethernet port

4. Copper port status LED

5. Copper port status LED

6. 10/100/1000Base-T auto-sensing Ethernet port

7. SFP port status LED

8. 1000Base-X SFP port

Hardware Installation and Reference Guide

Product Overview

Back Panel

Figure 1-6 Back Panel of RG-S1920-24GT4SFP/2GT

Note

1. Grounding pole

2. Vent

3. Power cord retention clip

4. AC power port

Heat Dissipation

The RG-S1920-24GT4SFP/2GT adopts natural heat dissipation, thereby ensuring normal function of the device in the

specified environment. 10 cm distance space should be reserved at both sides and the back plane of the cabinet to allow

air circulation. It is recommended to clean the device once every 3 months to avoid dust from blocking vents.

LEDs

LED

Panel Identification

State

Meaning

Off

The switch is not receiving power.

Blinking green

The system is being initialized.

Continuous blinking indicates errors.

System status LED

Status

Solid green

The switch is operational.

Off

The port is not connected.

Solid green

The port is connected at 10/100/1000 Mbps.

1000Mbps RJ-45 port

status LED

1-26

Blinking green

The port is receiving or transmitting traffic at

10/100/1000 Mbps.

Off

The port is not connected.

Solid green

The port is connected at 100/1000 Mbps.

1000Mbps SFP port

status LED

25F-28F

Blinking green

The port is receiving or transmitting traffic at

100/1000 Mbps.

Hardware Installation and Reference Guide

Preparation before Installation

2Preparation before Installation

2.1 Safety Suggestions

To avoid personal injury and equipment damage, please carefully read the safety suggestions before you install the

RG-S1920 series switch.

The following safety suggestions do not cover all possible dangers.

2.1.1 Installation

Keep the chassis clean and free from any dust.

Do not place the equipment in a walking area.

Do not wear loose clothes or accessories that may be hooked or caught by the device during installation and

maintenance.

Turn off all power supplies and remove the power sockets and cables before installing or uninstalling the device.

2.1.2 Movement

Do not frequently move the device.

When moving the device, note the balance and avoid hurting legs and feet or straining the back.

Before moving the device, turn off all power supplies and dismantle all power modules.

2.1.3 Electricity

Observe local regulations and specifications when performing electric operations. Relevant operators must be

qualified.

Before installing the device, carefully check any potential danger in the surroundings, such as ungrounded power

supply, and damp/wet ground or floor.

Before installing the device, find out the location of the emergency power supply switch in the room. First cut off the

power supply in the case of an accident.

Try to avoid maintaining the switch that is powered-on alone.

Be sure to make a careful check before you shut down the power supply.

Do not place the equipment in a damp location. Do not let any liquid enter the chassis.

Any nonstandard and inaccurate electric operation may cause an accident such as fire or electrical shock, thus

causing severe even fatal damages to human bodies and equipment.

Direct or indirect touch through a wet object on high-voltage and mains supply may bring a fatal danger.

If a power supply system is equipped with a leakage protector (also referred to as "leakage current switch" or

"leakage current breaker"), the rated leakage action current of each leakage protector is greater than twice of the

theoretical maximum leakage current of all the power supplies in the system. For example, if a system is equipped

with 20 identical power supplies, the leakage current of each power supply is equal to or less than 1.5mA, and the

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Ruijie

Ruijie

Ruijie RG-NBS5100 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-NBS Series Manual de usuario

Ruijie

Ruijie RG-CS88-08 Series Manual de instalación y funcionamiento

Ruijie

Ruijie XS-S1960-24GT4SFP-UP-H Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S5300-E Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6930-2C Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S2600E Series Manual de usuario

Ruijie

Ruijie RG-S6910-3C Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-CS83 Series Manual de usuario

Ruijie

Ruijie RG-S6510-32CQ Manual de instalación y funcionamiento

Ruijie

Ruijie RG-ES200 Series Manual de usuario

Ruijie

Ruijie RG-S7600 Series Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-NBS7003 Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-NBS3100-48GT4SFP-P Manual de instalación y funcionamiento

Ruijie

Ruijie RG-CS83 Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S5000-E Series Cómo utilizar

Ruijie

Ruijie RG-S6580-24DC8QC Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S2910-24GT4SFP-UP-H Manual de instalación y funcionamiento

Ruijie

Ruijie Reyee RG-ES106D-P V2 Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6580-48CQ8QC Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S6150-X Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-ES08 Manual de usuario

Ruijie

Ruijie XS-S1960-48GT4SFP-H Series Manual de instalación y funcionamiento

Ruijie

Ruijie RG-S2924GT/8SFP-XS-P Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manual de usuario