Rosewill RX81US-HT-25A-BLK Manual de usuario

External Enclosure for

2.5" SATA to USB + eSATA

RX81US-HT-25A-BLK

User Manual

External Enclosure for 2.5” SATA to USB + eSATA User Manual

Please read this installation carefully before you use the

products.

Precaution:

1. If it is a new HDD, needs to processing the disk partition

2. Win98SE and WinME do not recognize NTFS formatted drives,

so if you want to use your drive on those platforms, we

recommend you to use FAT32 instead.

3. Mac OS does not recognize NTFS formatted drives, to use

your device on both platforms, we recommend you using

FAT32.

4. If you use Win2000 / WinXP / Win Vista and FAT32, the

biggest single partition you can create will be 32GB. To create

larger partitions, you need to change to NTFS format.

5. Make sure the jumper settings of your hard drive is “master”.

System Requirement

•Minimum Intel Processor II 350MHz, 64MB RAM

•Compatible with IBM PC, USB interface included，Windows

98/ME/2000/XP/Vista operate system.

•Minimum Apple G3 processor, 64MB RAM

•MAC computer system MAC OS V8.6 or higher.

•Linux OS: please download kernel USB stack.

Package Contents

•2.5 inch external enclosure

•Driver Disk

•Installation Guide

•eSATA cable

•USB cable

•USB to DC cable

•Screw Kit

•Carry bag

External Enclosure for 2.5” SATA to USB + eSATA User Manual

Feature

•Standard USB 2.0 high speed transfer rate.

•Support Serial ATA. (USB + eSATA).

•eSATA transfer rate up to 3.0Gbps(NCQ support)

•Suitable for 2.5" HDD.

•All aluminum, to enhance heat dissipation.

OS support Win 98SE/ME/2000/XP/Vista/Mac OS 8.6 above.

echnical Specifi

•Plug and play / hot swappable.

•

T cations

Bus Interfaces USB v 2.0 / eSATA

Data Speeds USB 2.0 = 480 Mbps

eSATA = 3 Gbps (NCQ Support)

Connectors USB mini B receptacle / eSATA connectors

SATA Standard II with NCQ supportCompliant with SATA I /

LED Power On / Access

Dimensions 132*82*18 mm ( L*W*H)

External Enclosure for 2.5” SATA to USB + eSATA User Manual

Installation Guide

1. Release the screws to pull out the HDD frame.

2. Fix the HDD by screws (after HDD located with the connecter).

3. Pull in the frame into external box.

4. Fasten the rear panel by screws.

5. After connect transfer cable and Power cord, the external HDD will

appear the relativity.

External Enclosure for 2.5” SATA to USB + eSATA User Manual

Attention

•Only one interface at the time can be used(combo model)

•If this HDD is new one, please partition & format disk, otherwise

the system cannot detect HDD.

•The HDD jumper should be set to “master”.

•Make sure your PCI Host Card is installed correctly

•If required, update your OS (win 2000 to SP4, Win XP to SP1a)

•Only one computer at the time can access the drive

Driver Installation

Windows 98SE

•After plug the external box into, the system will remind you there

is a new hardware of USB Storage Adapter add into.

•Design the driver of the safe path (in the driver), the system will

active the installation automatically.

•After for a while, click "My Computer", USB HDD will appear the

relativity on the PC.

Windows ME/2000/XP/Vista

The system already provided support for the software.

MAC OS 9.x/above

OS 9.X edition:

The system already provides support for the software.

External Enclosure for 2.5” SATA to USB + eSATA User Manual

The divided partition of the external HDD

Win 98SE/ME SYSTEM

FDISK is command that doing the divided partition to HDD, The step

of how to divided partition from the HDD by using FDISK as follows:

1. Plug the cable of USB into PC, and be sure that the PC has

identified HDD.

2. Execute "FDISK" under the model of COMMAND.

3. After enter the FDISK program [If the FDISK program does not

work, please restart your PC again (don't plug out the USB

HDD) then it will be work]. Firstly select "The fifth item" --select

the USB HDD you want to divided partition for and then just

see the illustration as follows: Then just follow the instruction

to divided partition for the HDD of USB.

Windows 2000/XP/Vista

Plug the HDD into your system, it will appear the hot plug a play.

Just click “Control Panel”/ “manage tool” / “computer management”

/ “Disk management”. All the disk connects to the PC will appear on

the chart, as well as the state of the HDD. Find out the HDD and

click the right bottom of the mouse under the state of chart, just

follow the step. Take a look of the icon on the bottom.

Mac OS

Mac OS9.2 and earlier version does not support creating partition on

an external HDD. For your new HDD, you need to purchase

additional 3rd party software to creating your HDD partition.

For Mac OS X, use the Disk Utility to format and divided partitions

on your external disk.

• Select “Disk Utilities” in the utilities folder.

• Choose your external drive and format it.

External Enclosure for 2.5” SATA to USB + eSATA User Manual

Notice: If you want your ENCLOSURE on a Windows as well as

on your Mac OS, we recommend you to use a PC to format the

drive. Choose FAT32 format and do not change anything on the

partition or format on your Mac, otherwise the Windows OS can

not be able to recognize the ENCLOSURE.

To remove the device:

For Windows 98SE Users

Before you remove your device please wait for “Access LED”

on reader stops blinking to prevent data loss.

For Windows ME/2000/XP/Vista Users

Please double-click the icon on the system tray. A

dialog box will appear.

Double-click the Generic USB Storage Device to remove the

device for preventing from data loss.

Mac OS

You can remove the cable of USB after putting the icon of

USB HDD on the desktop into the trash can.

FAQ

How to solve it if you can’t use the Mobile Disk under some OS:

It doesn’t support any USB device under the WIN95 and NT4 OS, so

that can’t use the Mobile Disk.

After formatting can PC use in the MAC?

If use the Mobile Disk in the PC, can just format directly. If the PC &

MAC cannot be in common use, you can use the MACOPEN

External Enclosure for 2.5” SATA to USB + eSATA User Manual

software (download from the Internet) in the PC, format to the MAC

model. If you used the MO storage before, you must familiar and

have more experience about it because MO storage has the same

problem when doing the format.

Why I can not see the drive?

If you can not see the drive, make sure the jumper settings of your

hard drive is “master”.

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and

future support for your product.

Tabla de contenidos

Otros manuales de Recinto de Rosewill

Rosewill

Rosewill PRISM S Manual de instrucciones

Rosewill

Rosewill 5600 Series Manual de usuario

Rosewill

Rosewill RX32 Manual de usuario

Rosewill

Rosewill RX30 Instrucciones de instalación y funcionamiento

Rosewill

Rosewill RX-35MV Series Manual de usuario

Rosewill

Rosewill LINE Manual de usuario

Rosewill

Rosewill SRM-01B-450 Manual de usuario

Rosewill

Rosewill RX35-AT-SU3 Manual de usuario

Rosewill

Rosewill RX251-US Manual de usuario

Rosewill

Rosewill SPECTRA D100 Manual de instrucciones

Rosewill

Rosewill RDEE-12002 Manual de usuario

Rosewill

Rosewill RISE Manual de usuario

Rosewill

Rosewill RX-C202 Manual de usuario

Rosewill

Rosewill Lineom Manual de usuario

Rosewill

Rosewill CASE 422 Series Manual de usuario

Rosewill

Rosewill RX81U-AT-25A Manual de usuario

Rosewill

Rosewill Prism T500 Manual de usuario

Rosewill

Rosewill RX251-US Manual de usuario

Rosewill

Rosewill RX353 Series Manual de usuario

Rosewill

Rosewill strykerM Manual de usuario

Rosewill

Rosewill RX25-AT-SC-BLK/SLV Manual de usuario

Rosewill

Rosewill CHALLENGER-S Manual de usuario

Rosewill

Rosewill Cullinan MX Manual de instrucciones

Rosewill

Rosewill Legacy MX2 Manual de usuario

Manuales populares de Recinto de otras marcas

SilentiumPC

SilentiumPC Armis AR5 Manual

Pulsar

Pulsar 17/TRP80/DSPR Manual de usuario

Thermaltake

Thermaltake V150 TG Manual de usuario

MSI

MSI MPG SEKIRA 500X Manual de usuario

Antec

Antec Dark fleet DF-10 Manual de usuario

Nexans

Nexans WTC05 Manual de usuario

Peavey

Peavey DS 1502 Manual de usuario

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manual de usuario

QNAP

QNAP SAS JBOD CLI 1.0 Manual de usuario

GAMDIAS

GAMDIAS Talos P1 Manual de usuario

Auvs

Auvs KR615 Manual de usuario

Digitus

Digitus DA-71114 Manual de usuario

CommScope

CommScope FDH 3000 Manual de usuario

FS FHD-FWME4 Manual de usuario

JBL

JBL CS1215T Manual de usuario

Pulsar

Pulsar ARAD-S4 Manual de usuario

Pulsar

Pulsar AWO454 Manual de usuario

NewerTech

NewerTech Voyager S3 Manual de usuario