Rose electronics CrystalView Plus Manual de usuario

Using the CD

Insert the provided CD and

the Product Document

selection window will

automatically display.

Select the product and the

Manual, DataSheet, and

QuickStart document

window will display. Select

the document to display or

print. Documents are in

PDF format.

The CrystalView Plus is available in several models; single, dual, and quad

video models and the PC-Serial/Audio model. The local access version allows

an additional KVM station to be connected to the Local Unit.

The CrystalView Plus system consists of two Units, a Local Unit and a Remote

Unit. The Local Unit connects to your CPU and one or two video sources or a

Rose switch. The Remote Unit connects to a keyboard, one to four video

monitors and a mouse. The Local and Remote Units are connected together

with industry standard CAT-5, CAT-5e, or CAT-6 shielded or unshielded, solid

core twisted-pair cable terminated with RJ45 connectors. All models can extend

the distance from the CPU up to 1,000 feet. CAT-x cable

Serial/Audio models can connect a pair of

stereo speakers, a microphone, and a

supported serial device. Serial and audio

support is on the remote unit port #1 only.

The video from each connected computer can be adjusted using simple

keyboard commands shown in the keyboard command table.

Adjusting the video consists of:

1. Enter the Command Mode

2. Select the video channel to adjust

3. Display the test card at http://www.rose.com/htm/crvtestcard.htm or

create a straight line graphic that is equally divided into three color

parts, RED, GREEN, and BLUE

4. Adjust the RED, GREEN, and BLUE delay to align the three colors

5. Observe the “H” in the lower left corner of the test card or display some

text on a white background.

6. Adjust the LF and HF Equalization to eliminate smearing or bright

streaks

7. Save the settings

8. On the dual and quad models, select the next video channel to adjust

and perform steps 3 – 7 on this and all other channels.

Keyboard commands

Note: Use only the numeric keys above the keyboard to initiate the keyboard

commands from the remote unit.

Do not use the numeric keypad.

Command

Key Sequence

Command mode – [L-Ctrl]

+ [L-Shift] + [F10]

Entering the command

mode sends the remote

units keyboard instructions

to the CrystalView Plus

instead of the connected

computer. In the

command mode, the

yellow LED on the remote

units RJ45 connector for

channel 1 will light

indicating that the unit is in

the command mode. The

keyboard status LEDs

(Num lock, Caps Lock,

and Scroll Lock) will flash

indicating which channel is

selected. The Command

mode automatically times

out after 30 seconds of

inactivity, saves all

settings, and returns the

keyboard to normal

functions.

Command Mode

[L-Ctrl] + [L-Shift] + [F10]

Exit Command Mode and save

Exit Command Mode without saving

[ESC]

[L-Shift] + [ESC]

Select Channel 1, 2, 3, or 4

[1] / [2] / [3] / [4]

Select Channel 0

[0] (select all channels)

Reset EQ & Delay values

[L-Ctrl] + [Home]

Next Assisted EQ setting

[L-Ctrl] + [PgUp]

Previous Assisted EQ setting

[L-Ctrl] + [PgDn]

Increase RED delay

[R] + [R-arrow]

Decrease RED delay

[R] + [L-arrow]

Increase Green delay

[G] +[R-arrow]

Decrease Green delay

[G] + [L-arrow]

Increase Blue delay

[B] + [R-arrow]

Decrease Blue delay

[B] + [L-arrow]

Toggle RED delay

[L-Ctrl] + [R]

Toggle GREEN delay

[L-Ctrl] + [G]

Toggle BLUE delay

[L-Ctrl] + [B]

Reset EQ values

[L-Ctrl] + [End]

Increase LF EQ (Course)

[L] + [Up Arrow]

Decrease LF EQ (Course)

[L] + [Dn Arrow]

Increase LF EQ (Fine)

[L] + [R-Arrow]

Decrease LF EQ (Fine)

[L] + [L-Arrow]

Increase HF EQ (Course)

[H] + [Up Arrow]

Decrease HF EQ (Course)

[H] + [Dn Arrow]

Increase HF EQ (Fine)

[H] + [R-Arrow]

Decrease HF EQ (Fine)

[H] + [L-Arrow]

Reset keyboard and mouse

[F1]

Send NULL mouse byte

[F3]

Reset to factory defaults

[L-Ctrl] + [F9]

Toggle Unit Private Mode

[Scroll Lock]

Keyboard Commands

NOTE: All keyboard commands are initiated from the Remote unit.

Before any keyboard command can be issued, the unit must be in the

command mode and a channel selected. Refer to the installation and

operations manual for a complete description of all keyboard

commands and their usage.

Otros manuales para CrystalView Plus

Otros manuales de Extensor de Rose electronics

Rose electronics

Rose electronics CrystalView DVI Plus Manual de usuario

Rose electronics

Rose electronics CrystalView DVI Multi Manual de usuario

Rose electronics

Rose electronics CrystalLink CLK-1U4TP-100M/PE Manual de usuario

Rose electronics

Rose electronics CrystalLink CLK-1U1TP-40M Manual de usuario

Rose electronics

Rose electronics CrystalView Plus Manual de usuario

Rose electronics

Rose electronics AUTO EQUALIZATION Manual de usuario

Rose electronics

Rose electronics ORION Manual de usuario

Rose electronics

Rose electronics CrystalView DVI EX Manual de usuario

Rose electronics

Rose electronics CrystalView DVI Mini Manual de usuario

Rose electronics

Rose electronics CrystalView EX5 Manual de usuario

Rose electronics

Rose electronics CRK-1DFMPDVI/SF Manual de usuario

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Manual de usuario

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Manual de usuario

Rose electronics

Rose electronics CrystalView Micro LT Manual de usuario

Rose electronics

Rose electronics CrystalView DVI Quad Guía de configuración

Rose electronics

Rose electronics Crystal View Manual de usuario

Rose electronics

Rose electronics CRK-2DTPPDVI Manual de usuario

Rose electronics

Rose electronics ViewLink CATx Manual de usuario

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Manual de usuario

Rose electronics

Rose electronics CrystalView Extreme Manual de usuario

Rose electronics

Rose electronics CrystalView Rack CRV-12SLP Manual del propietario

Rose electronics

Rose electronics CrystalLink CAT5 Serial Manual de usuario

Rose electronics

Rose electronics CRYSTALVIEW USB 1.1 Manual de usuario

Rose electronics

Rose electronics CrystalView DVI CATx CRK-2DTXPD1D Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario