Rose electronics CrystalLink CLK-1U4TP-100M/PE Manual de usuario

CrystalLink USB 2.0 CAT5

USB CAT5 Extender

10707 Stancliff Road Phone: (281) 933-7673

Houston, Texas 77099 WWW.ROSE.COM

INSTALLATION AND

OPERATIONS

MANUAL

Part Number CLK-1U4TP-100M/PE

LIMITED WARRANTY

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any

means, electronic or mechanical, including photocopying and recording, without the prior written permission

of Rose Electronics.

Rose Electronics Part # MAN-CRL-USB2-peC5

Printed In the United States of America - Revision

Rose Electronics®warrants the CrystalLink™ USB 2.0 CAT5 to be in good working order for one year

from the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to

be in good working order at any time during this one-year warranty period, Rose Electronics will, at its

option, repair or replace the Unit as set forth below. Repair parts and replacement units will be either

reconditioned or new. All replaced parts become the property of Rose Electronics. This limited

warranty does not include service to repair damage to the Unit resulting from accident, disaster,

abuse, or unauthorized modification of the Unit, including static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty period

to Rose Electronics or an authorized repair center providing a proof of purchase date. If this Unit is

delivered by mail, you agree to insure the Unit or assume the risk of loss or damage in transit, to

prepay shipping charges to the warranty service location, and to use the original shipping container or

its equivalent. You must call for a return authorization number first. Under no circumstances will a unit

be accepted without a return authorization number. Contact an authorized repair center or Rose

Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO

WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME

STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO

THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR SOLE

REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL

ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST

PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING

OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE

ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY

TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE

OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

IBM, AT, and PS/2 are trademarks of International Business Machines Corp. Microsoft and Microsoft

Windows are registered trademarks of Microsoft Corp. Any other trademarks mentioned in this

manual are acknowledged to be the property of the trademark owner.

FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITY

FEDERAL COMMUNICATIONS COMMISSION

AND INDUSTRY CANADA

RADIO-FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses and can radiate radio frequency energy

and if not installed and used properly, that is in strict accordance with the

manufacturer’s instructions may cause interference to radio communication.

It has been tested and found to comply with the limits for a Class A digital

device in accordance with the specifications of Part 15 of FCC rules, which

are designed to provide reasonable protection against such interference

when the equipment is operated in a commercial environment. Operation of

this equipment in a residential area is likely to cause interference, in which

case the user at his own expense will be required to take whatever

measures may be necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise

emission from digital apparatus set out in the Radio Interference Regulation

of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques

dépassant les limites applicables aux appareils numériques de la classe A

prescrites dans le Règlement sur le brouillage radioélectrique publié par

Industrie Canada.

EUROPEAN UNION DECLARATION OF CONFORMITY

The Declaration of Conformity is based upon

compliance of the product with the following

harmonized standards:

EN55022/A1 Class A

EN50082-1 IEC 801-2

IEC 801-3

IEC 801-4

IC Statement

This Class A digital apparatus complies with Canadian ICES-003

TABLE of CONTENTS

Contents Page #

Disclaimer...................................................................................................... 1

System introduction....................................................................................... 1

Features......................................................................................................... 2

Package contents .......................................................................................... 2

Rose Electronics web site.............................................................................. 2

About this manual.......................................................................................... 2

CrystalLink USB 2.0 CAT5 model ................................................................. 3

Transmitter................................................................................................. 3

Receiver..................................................................................................... 4

Cables........................................................................................................ 4

Verifying the installation............................................................................. 5

Operating Instructions.................................................................................... 6

Troubleshooting Guide .................................................................................. 7

Safety............................................................................................................. 8

Service Information...................................................................................... 10

Maintenance and Repair.......................................................................... 10

Technical Support.................................................................................... 10

Figures Page #

Figure 1. Installation ...................................................................................... 5

Appendices Page #

Appendix A. General Specifications ........................................................... 11

Appendix B. Part Numbers and Cables...................................................... 11

INTRODUCTION

Installation and Operations Manual 1

Disclaimer

While every precaution has been taken in the preparation of this manual, the

manufacturer assumes no responsibility for errors or omissions. Neither

does the manufacturer assume any liability for damages resulting from the

use of the information contained herein. The manufacturer reserves the

right to change the specifications, functions, or circuitry of the product

without notice.

The manufacturer cannot accept liability for damages due to misuse of the

product or other circumstances outside the manufacturer’s control. The

manufacturer will not be responsible for any loss, damage, or injury arising

directly or indirectly from the use of this product.

System introduction

Thank you for choosing the Rose ElectronicsCrystalLinkUSB 2.0 CAT5

extender. The CrystalLink USB 2.0 CAT5 extender is the result of Rose

Electronics commitment to providing state-of-the-art solutions for today’s

demanding workplace. The CrystalLink USB 2.0 CAT5 has proven to be a

valuable investment for any business, big or small, that has a need to

access and extend their USB 1.1 or 2.0 peripherals from a remote location.

This location can be up to 330 feet (100m).

The receiver unit’s USB ports connect to your USB peripherals. The

number of peripherals can be increased by using a standard USB hub.

The USB peripherals can be USB 1.1 devices (low-speed or full-speed) or

USB 2.0 high-speed devices operating up to 480 Mb/s. The receiver unit

can supply up to 500 ma for driving high-power USB devices.

Plug-and-play installation makes installing the transmitter and receiver

simple and easy. Connect the transmitter to the computers USB port,

connect the USB ports on the receiver to your USB devices, connect the

transmitter to the receiver with up to 330 feet of industry standard CAT5 or

better cable, connect the power adapter to the receiver and power on the

system. The USB devices will function normally as if they are directly

connected to your computer’s USB port even though they are up to 330 feet

away.

2Installation and Operations Manual

Features



Supports USB 1.1 (low and full speed) and USB 2.0 (high-speed)



Extends USB devices up to 330 feet (100m) over CAT5 or better cable



Four USB port on the receiver unit



Standard USB hubs can be used to increase the number of connected

USB devices.



Up to 500 ma of power is available at each USB port for powering high-

power USB devices



Plug-and-Play installation , no configuration or set-up needed



Operating system independent, supports all major operating systems

Package contents

The package contents consist of the following:

The CrystalLink USB 2.0 transmitter and receiver units

Power adapter for the remote unit. (Auto-switching transformer)

Installation and operations manual CD.

CAT5 and USB cables are usually ordered separately. If the package

contents are not correct, contact Rose Electronics or your reseller, so the

problem can be quickly resolved.

Rose Electronics web site

Visit out web site at www.rose.com for additional information on the

CrystalLink USB 2.0 CAT5 extenders and other products that are designed

for data center applications, classroom environments and other applications.

About this manual

This manual covers the installation and operation of the CrystalLink USB 2.0

CAT5 extender.

MODEL

Installation and Operations Manual 3

CrystalLink USB 2.0 CAT5 model

Transmitter

Connectors

USB Type A

RJ45F

Indicator LEDs

Power

Host

Link

Activity

Power LED (Blue)

On when power is supplied from the computer’s

USB port, Off when no power is supplied

Host LED (Green)

On when installed properly

Link LED (Green)

On when a link between the transmitter and

receiver is established, Off when no link is

detected

Activity LED (Amber)

Blinks when data is transmitted

4Installation and Operations Manual

Receiver

Device

Connectors

USB Type B (4)

Indicators LEDs

Device (Green)

On when a USB device is connected

Power LED (Blue)

On when power is supplied from the computer’s

USB port, Off when no power is supplied

Host LED (Green)

On when installed properly

Link LED (Green)

On when a link between the transmitter and

receiver is established, Off when no link is

detected

Activity LED (Amber)

Blinks when data is transmitted

Cables

The only cable(s) needed are industry standard CAT5 or better cable(s).

For surface cabling, do not exceed the maximum cable length of 330 feet

(100m).

For Premise cabling, the maximum CAT5 cable length including patch

cables should not exceed 330 feet (100m). The combined length of any

patch cable using stranded conductors must not exceed 33 feet (10m).

INSTALLATION

Installation and Operations Manual 5

Figure 1 outlines the basic installation of the CrystalLink USB 2.0 CAT5

extender. The installation steps below are a guide to properly install the

units and cabling.

Figure 1. Installation

Before you install the CrystalView USB 2.0 CAT5 extender, it is

recommended that you pre-plan you system layout, consisting of the

placement of the computer, the routing of the CAT5 cabling, and the

location of the USB device(s).

1. Connect the transmitters USB Type A cable connector to an unused

USB port on the computer.

2. Connect the provided power adapter to the power jack on the receiver

unit. Use only the furnished power adapter. Other power adapters may

cause permanent damage to the receiver unit and void the warranty.

3. Connect up to 330 feet (100M) of industry standard UTP CAT5 or better

cable terminated with RJ45M connectors to the transmitter’s and

receiver’s RJ45F port.

4. Connect the provided power adapter to a 100/240 V AC 50 – 60 Hz

power source.

5. Install any required software to operate the USB device(s).

6. Connect the USB peripherals to the USB Type A connectors on the

receiver unit.

Verifying the installation

1. Check that the USB device is detected and installed properly in the

operating system.

2. Verify that the CrystalView USB 2.0 extender has installed correctly by

opening the Device manager and expand the USB controller section

(click on the + sign). You should see the unit listed as a Generic USB

Hub.

3. Verify the Power, Host, and Link LEDs are on and the Activity LED is

blinking. If any LED is off, check the CAT5 cabling.

Transmitter Receiver

CAT5 Cable

USB 1.1 or 2.0

peripherals

6Installation and Operations Manual

Operating Instructions

Operating your CrystalLink USB 20 extender is no different than having your

USB peripherals directly connected to your computer’s USB port.

Any compatible USB 1.1 or 2.0 device can be totally controlled and operated

normally with no special configuration or commands. USB printers, digital

cameras, scanners, or any compatible USB 1.1 or 2.0 device will function

properly. If more than 4 USB devices need to be remotely accessed, you

can add a standard USB hub to increase the number of USB devices.

When using a USB hub, keep in mind that the USB port on the receiver can

supply up to 500ma of current. Connecting a 4-port USB hub to a receiver

port receives a max current of 500ma to the USB hub or 125ma per hub

port. UP to 14 USB devices, including additional USB hubs can be

connected to the receiver unit. Powered USB hubs may be need if several

high powered USB devices are connected.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Extensor de Rose electronics

Rose electronics

Rose electronics CRYSTALVIEW USB 1.1 Manual de usuario

Rose electronics

Rose electronics CrystalView Manual de usuario

Rose electronics

Rose electronics CrystalView USB2 Manual de usuario

Rose electronics

Rose electronics ViewLink Coax Manual de usuario

Rose electronics

Rose electronics CrystalView EX DVI Multi CRK-1DTXT2DM-2T-EX6 Manual de usuario

Rose electronics

Rose electronics CrystalView Rack CRV-12SLP Manual del propietario

Rose electronics

Rose electronics CRK-T1DFXDM-DLT Manual de usuario

Rose electronics

Rose electronics CrystalLink USB3.1 Fiber Dual Port Manual de usuario

Rose electronics

Rose electronics CrystalView CrystalView TWISTED PAIR KVM... Manual de usuario

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Manual de usuario

Rose electronics

Rose electronics VideoSplitter CAT5 Manual de usuario

Rose electronics

Rose electronics CrystalView DVI CATx CRK-2DTXPD1D Manual de usuario

Rose electronics

Rose electronics CrystalView Mini Manual de usuario

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Manual del propietario

Rose electronics

Rose electronics AUTO EQUALIZATION Manual de usuario

Rose electronics

Rose electronics CLK-4U2TP-100M Manual de usuario

Rose electronics

Rose electronics PS/2 Manual de usuario

Rose electronics

Rose electronics CRV-DLDFMPDVI Manual de usuario

Rose electronics

Rose electronics CrystalView HDMI 4K60 Manual de usuario

Rose electronics

Rose electronics CrystalView Plus Manual de usuario

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Manual de usuario

Rose electronics

Rose electronics CrystalView DVI Mini Manual de usuario

Rose electronics

Rose electronics CrystalLink USB2.0 CATx Manual de usuario

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario