Riva RC6602HD-5311 Manual de usuario
1
www.rivatech.de
Quick Installation Guide
This manual provides instructions for quick installation and basic configuration of your IP device.
2
www.rivatech.de
Step1. Connect cables to IP device
Connect required cables to the device including the power cable, LAN cable, and other
optional cables. To see the correct positions of all connectors, refer to the following image
below.
The device is polarity sensitive. Incorrect power connection
may cause malfunction or damage to the IP device.
Caution
!
Power Adaptor Connector (DC
12V)
* Models herein and their appearance are subject to change without any prior notice.
IPN6602HD-5215
DCBA
A : DO-
B : DO+
C : DI+
D : DI-
Red : AIN
White : AOUT
Cable arrange
IPN6602HD-5215
DCBA
A : DO-
B : DO+
C : DI+
D : DI-
Red : AIN
White : AOUT
Cable arrange
A: DO-
B: DO+
C: DI+
D: DI-
Power Input
(12VDC)
(
LAN Port
DCBA
Clamping Core
*Use to prevent
electromagnetic
interference
3
www.rivatech.de
Step2. Install IP device
1) Place the installation template that is provided in the package on the
desired position of installation.
2) Drill four holes on the template and insert anchor blocks into the
holes. Fasten the camera housing with screws.
3) Make sure the cables are properly connected to the camera by
referring to the Step 1.
4) Adjust the camera to the desired angle by unscrew the joints by
referring to the following pictures.
Adjust this joint to
install it on the wall
Tiling adjustment
Panning adjustment
The camera may fall off the ceiling even after the proper installation and
mounting. To prevent any accident, make sure the ceiling is firm and
stable enough to support the camera. If any reinforcement is needed,
consult with your safety personnel and proceed with the installation.
Caution
!
4
www.rivatech.de
Step3. Adjust the lens focus
1) Check the video output on a Web browser. (Refer to Step 5 for more details.)
2) To adjust the zoom, focus and etc., open the bottom bracket by using driver.
Step4. Set up network environment
The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of
the device from converting the MAC address’s hexadecimal numbers, which is attached to the
device. Be sure that the device and PC are on a same area network before running the
installation.
IPN6602HD-5311 IPN6602HD-5215
TELE
WIDE NEAR
FAR AF
NT/PAL
F/D
VOUT
VOUT F/D
NT/PAL
TELE WIDE
FAR NEAR
TELE/WIDE: Zoom
FAR/NEAR: Focus
A/F: Auto Focus
NT/PAL: NTSC/PAL
IPN6602HD-5311 IPN6602HD-5215
TELE
WIDE NEAR
FAR AF
NT/PAL
RESET
VOUT
VOUT
NT/PAL
TELE WIDE
FAR NEAR
RESET
*Video out uses only for installation and works for 3
minutes when PAL/NTSC button is pushed.
* The default is no video output, but whenever you
push the button the video output status is changed and
repeated as follow:
No video output -> PAL-> NTSC
5
www.rivatech.de
Generic IP Environment
In case of generic private network environment where IP address 192.168.XXX.XXX are
used, users may view the live streaming images on a web page using the device’s default IP
address:
1. Convert the device’s MAC address to the IP address. Refer to the Hexadecimal-Decimal
Conversion Chart at the end of the manual.
(The MAC address of the device is attached on the side or bottom of the device.)
2. Start the Microsoft® Internet Explorer web browser and enter the IP address of the device.
3. Web streaming and device configurations are supported through ActiveX program. When
the ActiveX installation pop-up window appears, authorize and install the ActiveX setup.exe.
MAC address = 00-13-23-01-14-B1 →IP address = 192.168.20.177
Convert the last two set of hexadecimal numbers to decimal numbers.
6
www.rivatech.de
Custom IP Environment
IPAdminTool and the manual are provided on USB stick or can download from www.rivatech.de
homepage.
IPAdminTool is a management tool, which automatically scans all of the network products for
users to perform administrative tasks, which includes network configurations, firmware update,
device reboot, and device organizations.
To modify the device’s default IP address for customized network area;
1. Find the device from the IPAdminTool’s list and highlight the device’s name.
2. Right-click the mouse and select “IP Address”; IP Setup window appears.
7
www.rivatech.de
3. In the IP Setup’s window, information under ‘Local Network information’ displays the
user/PC’s network area information. Those information need to be incorporated to the
IP Address, Subnet Mask, Gateway, and DNS boxes, except the last 2 sets of IP
Address, which are to be the unique numbers for the device. Refer to the image above
for the setting
4. Click ‘Setup’ to complete the modification. When the dialog box appears to request user
name and password, enter the default value for the administrator account (case-
sensitive) as below:
ID:
root
Password:
pass
PC environment Info
Give new unique IP address in
last two sets and mirror other
information in other boxes
8
www.rivatech.de
Step5. View video on web page
Once the device has the proper IP address, users can view the live streaming images
through a web browser.
The default username and password is
root / pass
.
1. When the device’s web address is accessed, the browser asks to install the ActiveX.
Click Allow.
2. Setup.exe installation link or pop-up window appears, depends on Microsoft® Internet
Explorer version. Proceed with rest of setup installation.
9
www.rivatech.de
Caution
!
3. Follow the instructions of the dialog boxes and complete the installation. Once the
installation is complete, start the web browser again and check if video stream is
displayed in the main view frame.
If “
This software requires the Microsoft XML Parser V6 or higher.
Please download MSXML6 from the Microsoft website to continue.
Error code: Cannot create XMLDOMDocument.
” message appears,
download and install the Microsoft Core XML Services (MSXML)
6.0.
10
www.rivatech.de
Rebooting
Perform the following procedures to reset your device:
1. While the device is on, press the reset button for 1~2 seconds.
2. Wait for the system to reboot.
Resetting to the Factory Default Settings
When reset the device to the factory default setting, all parameters including the IP address
will be initialized.
To proceed back to the Factory Default reset:
1. While the device is on, press reset button and hold.
2. Release the Reset button after about 5 seconds when green LED blinks at rate of 200ms.
3. Wait for the system to reboot.
More Information
To learn more about using other features of your devices, refer to the manuals as “Web
Interface Manual” or “VCAsys_Online_Help”, which is available on USB stick or on
www.rivatech.de homepage.
Otros manuales para RC6602HD-5311
1
Tabla de contenidos
Otros manuales de Cámara de seguridad de Riva
Riva
Riva RC3402HD-6211R Manual de usuario
Riva
Riva RC100 Manual de usuario
Riva
Riva RC3500 Manual de usuario
Riva
Riva RC6802HD-6217 Manual de usuario
Riva
Riva RC362HD Manual de usuario
Riva
Riva RC3302HD-5344 Manual de usuario
Riva
Riva RC302SV-5117 Manual de usuario
Riva
Riva RC5510 Manual de usuario
Riva
Riva RC3202HD-6111 Manual de usuario
Riva
Riva RC8102HD-6111T Manual de usuario
Riva
Riva RC3202HD-6111W Manual de usuario
Riva
Riva RC3402HD-6211IR Manual de usuario
Riva
Riva RC6602HD-5311 Manual de usuario
Riva
Riva RC362HD-6211IR Manual de usuario
Riva
Riva RC3102HD-5211 Manual de usuario
Riva
Riva RC4602HD-6416 Manual de usuario
Riva
Riva RC6702HD-6211 Manual de usuario
Riva
Riva RC3702HD-5314 Manual de usuario
Riva
Riva RC3502HD-5211 Manual de usuario
Riva
Riva RC100 Manual de usuario
