REED R5040 Manual de usuario

1. VV

reedinstruments

www com

Model R5040

1000A AC/DC True RMS

Clamp Meter

Instruction

Manual

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

1.888.610.7664info@REED-Direct.com REED-Direct.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Table of Contents

Safety ............................................................................................ 3

Features......................................................................................... 4

Specications.............................................................................5-6

Instrument Description .................................................................. 7

Operating Instructions..............................................................8-11

AC/DC Current Measurements ................................................... 8

AC/DC Voltage Measurements ................................................... 8

Resistance Measurements .......................................................... 8

Diode and Continuity Measurements........................................... 8

Capacitance Measurements ....................................................... 9

Frequency or % Duty Cycle Measurements................................. 9

Temperature Measurements ..................................................... 10

Non-Contact AC Voltage Measurements................................... 10

Min/Max Recording................................................................... 10

Relative Mode........................................................................... 11

Data Hold ................................................................................. 11

Auto and Manual Range ........................................................... 11

Battery Replacement................................................................... 11

1.888.610.7664info@REED-Direct.com REED-Direct.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Safety

• Do not exceed the maximum allowable input range of any function

• Do not apply voltage to the meter when resistance function

is selected

• Set the function switch OFF when the meter is not in use

Warning

• Set the function switch to the appropriate position before measuring

• When measuring volts do not switch to current/resistance modes

• When changing ranges using the selector switch always disconnect

the test leads from the circuit under test

• Do not exceed the maximum rated input limits

Caution

• Improper use of this meter can cause damage, shock, injury or death

• Read and understand this user manual before operating the meter

• Always remove the test leads before replacing the battery

• Inspect the condition of the test leads and the meter itself for any

damage before operating

• Repair or replace any damage before use

• Use great care when taking measurements if the voltages are greater

than 25VAC RMS or 35VDC as they are considered a shock hazard

• Remove the battery if the meter is to be stored for long periods

• Always discharge capacitors and remove power from the device

under test before performing diode, resistance, or continuity tests

• Voltage checks on electrical outlets can be difcult and misleading

because of the uncertainty of connection to the recessed electrical

contacts

• If the equipment is used in a manner not specied by the manufac-

turer, the protection provided by the equipment may be impaired

1.888.610.7664info@REED-Direct.com REED-Direct.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Features

• Measures AC and DC voltage and current, resistance, capacitance

and frequency as well as temperature

• True RMS AC measurements

• Diode and continuity test with beeper

• Inrush current measurement

• 50,000-count digital display with 61-segment analog

• Bar graph and backlight

• Max/Min and Relative (zero) functions

• Data Hold function

• Auto or manual ranging

• Low battery indication and auto power-off

• Double molded plastic housing

• Conforms to EN61010 600V Cat. III

1.888.610.7664info@REED-Direct.com REED-Direct.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Specifications

Function Range & Resolution Accuracy (% of reading)

DC Current 500.00 ADC ±(2.5% + 30 dgt)

1000.0 ADC

AC Current 500.00 AAC ±(2.8% + 30 dgt)

1000.0 AAC

DC Voltage 500.00 mVDC ±(0.1% + 5 dgt)

5.0000 VDC ±(0.1% + 4 dgt)

50.000 VDC

500.00 VDC

1000.0 VDC ±(0.5% + 4 dgt)

AC Voltage 500.00 mVAC ±(1.0% + 40 dgt) (50/60Hz)

5.0000 VAC ±(1.0% + 30 dgt)

50.000 VAC

500.00 VAC

750.0 VAC

Resistance 500.00Ω ±(1.0% + 9 dgt)

5.0000KΩ ±(1.0% + 4 dgt)

50.000KΩ

500.00KΩ

5.0000MΩ ±(2.0% + 10 dgt)

50.000MΩ ±(3.0% + 10 dgt)

Capacitance 500.00nF ±(3.5% reading + 40 dgt)

5000.0nF ±(3.5% reading + 10 dgt)

50.00μF

500.0μF

5.000mF ±(5% reading + 10 dgt)

Frequency 10.000K ±(0.3% reading + 2 dgt)

Duty Cycle 5.0 to 95.0% ±(1.0% reading + 2 dgt)

Temp

(type-K)

-100.0 to 1000.0°C ±(1.0% reading + 2.5°C)

-148.0 to 1832.0°F ±(1.0% reading + 4.5°F)

continued...

1.888.610.7664info@REED-Direct.com REED-Direct.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Jaw Opening: 40mm (1.5”)

Diode Test: Test current of 0.3mA typical;

Open circuit voltage 1.5V DC typical

Continuity Check: Threshold <35Ω; Test current <0.5mA

Power Supply: One 9V battery

Dimensions: 232 x 77 x 39mm

Weight: 271g

Includes: One set of test leads, one temperature probe,

battery, and a soft carrying case

Optional Accessories: Accredited Calibration Certicate (CERTICM1)

For service on this or any other REED product or information on other

REED products, contact REED Instruments at [email protected]

1.888.610.7664info@REED-Direct.com REED-Direct.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Instrument Description

1. Current clamp

2. Non-contact AC voltage indicator light

3. Clamp trigger

4. Data hold and Backlight button

5. Rotary function switch

6. Hz% hold button

7. RANGE select button

8. MODE select button

9. Relative button

10. MIN/MAX hold button

11. LCD display

12. COM input jack

13. V Ω CAP TEMP Hz jack

Display Description

1. AC/DC indicator

2. Negative reading indicator

3. 50000 count main display

4. Analog Bargraph

5. Units of measurement

6. Audible continuity indicator

7. Diode test mode indicator

8. Relative mode indicator

9. Max/Min mode indicator

10. Data hold indicator

11. Auto range mode indicator

1.888.610.7664info@REED-Direct.com REED-Direct.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Operating Instructions

AC/DC Current Measurements

1. Set the function switch to the 1000ADC,

600ADC,1000AAC or 600AAC

range. If the range needed is not known,

select the higher range rst then move

to the lower range if necessary.

2. Press the trigger to the open jaw

and fully enclose one conductor.

The LCD will display the reading.

AC/DC Voltage Measurements

1. Insert the black test lead into the negative COM terminal and the

red test lead into the positive V terminal.

2. Set the function switch to the V position, and select either AC or

DC with the MODE button.

3. Select Hz,% or ACV with the Hz% button.

4. Connect the test leads in parallel to the circuit under test.

The LCD will display the reading.

Resistance Measurements

1. Insert the black test lead into the negative COM terminal and the

red test lead into the positive V terminal.

2. Set the function switch to the Ω position.

3. Touch the test probe tips across the circuit or component under

test. It is best to disconnect one side of the device under test so

the rest of the circuit will not interfere with the reading.

4. The LCD will display the reading.

NO YES

1.888.610.7664info@REED-Direct.com REED-Direct.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Diode and Continuity Measurements

1. Insert the black test lead into the negative COM terminal and the

red test lead into the positive V diode terminal.

2. Turn the rotary switch to the Ω position. Press the MODE button

until the Diode Test indicator appears on the display.

3. Touch the test probes to the diode under test. Forward voltage will

indicate 0.4V to 0.7V. Reverse voltage will be indicated by “OL”.

Shorted devices will indicate near 0mV and an open device will

be indicated by “OL” in both polarities. For Continuity tests, if the

resistance is < 40Ω, a tone will sound.

Capacitance Measurements

1. To avoid electric shock, disconnect power to the unit under test

and discharge all capacitors before taking any capacitance

measurements. Remove the batteries and unplug the line cords.

2. Set the rotary function switch to the CAP position.

3. Insert the black test lead into the negative COM terminal and the

red test lead into the positive V terminal.

4. Touch the test leads to the capacitor to be tested. Read the

capacitance value on the display.

Frequency or % Duty Cycle Measurements

1. Set the rotary function switch to the V position.

2. Select ACV with the MODE button and press the Hz/% button to

indicate “Hz” in the display.

3. Insert the black test lead into the negative COM terminal and the

red test lead into the positive V terminal.

4. Touch the test probe tips to the circuit under test. Read the

frequency value on the display.

1.888.610.7664info@REED-Direct.com REED-Direct.com

reedinstruments

www com

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black Rich Black -

20/20/20/100

Blue - 100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue - 100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue - 100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

INSTRUMENTS

Temperature Measurements

1. To avoid electric shock, disconnect both test probes from any

source of voltage before making a temperature measurement.

2. Set the function switch to TEMP. Press the Mode button to change

between °C and °F.

3. Insert the Temperature Probe into the negative COM and the

positive V terminals, making sure to observe the correct polarity.

4. Touch the Temperature Probe head to the area to be measured.

Keep the probe touching the part under test until the reading

stabilizes (about 30 seconds).

5. Read the temperature value on the display. To avoid electric shock,

be sure the thermocouple has been removed before changing to

another function.

Non-Contact AC Voltage Measurements

1. Touch the probe tip to the hot conductor or insert into the hot side

of the electrical outlet. If AC voltage is present, the detector will

light up.

2. The conductors in electrical cord sets are often twisted. For best

results, rub the probe tip along a length of the cord to assure plac-

ing the tip in close proximity to the live conductor.

3. The detector is designed with high sensitivity. Static electricity or

other sources of energy may randomly trip the sensor.

Min/Max Recording

While in Manual Range, select te proper range before selecting MIN/MAX

mto ensure that they MIN/MAX reading will not exceed the testing range.

Press the MIN/MAX button to select the minimum reading. Press the MIN/

MAX button again to select the maximum reading. Press the MIN/MAX button

again to exit and resume normal measuring.

1.888.610.7664info@REED-Direct.com REED-Direct.com

Otros manuales para R5040

Tabla de contenidos

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario