REED R8060 Manual de usuario

Sound

Level Meter

Instruction

Manual

R8060

www. .com information@itm.com1.800.561.8187

Table of Contents

Introduction ................................................................................................... 2

Product Quality

.............................................................................................. 3

Safety ............................................................................................................ 3

Features

......................................................................................................... 3

Included

......................................................................................................... 3

Specications

................................................................................................ 4

Instrument Description

.................................................................................. 5

Display Description ....................................................................................... 5

Operating Instructions

................................................................................6-7

MIN/MAX Hold ......................................................................................... 6

Auto Power OFF

....................................................................................... 7

Calibration Procedure............................................................................ 7

Battery Replacement..................................................................................... 8

AC/DC Signal Output Jack

............................................................................ 8

Applications................................................................................................... 9

Accessories and Replacement Parts ............................................................ 9

Product Care ................................................................................................. 9

Product Warranty ........................................................................................ 10

Product Disposal and Recycling ................................................................. 10

Product Support

.......................................................................................... 10

Introduction

Thank you for purchasing your REED R8060 Sound Level Meter. Please

read the following instructions carefully before using your instrument. By

following the steps outlined in this manual your meter will provide years of

reliable service.

www. .com information@itm.com1.800.561.8187

Product Quality

This product has been manufactured in an ISO9001 facility and has been

calibrated during the manufacturing process to meet stated product

specications. If a certicate of calibration is required please contact the

nearest authorized REED distributor or authorized Service Center. Please

note an additional fee for this service will apply.

Safety

Never attempt to repair or modify your instrument. Dismantling your

product, other than for the purpose of replacing batteries, may cause

damage that will not be covered under the manufacturer's warranty.

Servicing should only be provided by an authorized service center.

Features

• Highaccuracyof±1.4dBmeetsType2standards

• Triplerangemeasurement(60dBdynamicrange)

• A&Cfrequencyweighting

• Fast&Slowtimeweighting

• Large,easy-to-readLCDdisplay

• Digitalanalogbargraph

• DataholdandMin/Maxhold

• AC/DCoutputsignalforusewithdataloggers

• Tripodmountforlong-termmonitoring

• Lowbatteryindicatorandautoshutoff

Included

• WindshieldBall

• HardCarryingCase

• Battery

www. .com information@itm.com1.800.561.8187

Specifications

Measuring Ranges: 30 to 130dB

Low: 30 to 90 dB

Med: 50 to 110 dB

 High:70to130dB

DynamicRange: 60dB(ineachrange)

Accuracy: ±1.4dB

Resolution: Digital: 0.1 dB

Analog: 2dB

Response Time: Digital: 500ms

Analog: 100ms

FrequencyRange: 20Hzto8kHz

Frequency Weighting: A, C

TimeWeighting: Fast/Slow(125msand1s)

Microphone: 0.5"(12.7mm)electretcondenser

DigitalAnalogBargraph: Yes(30segment)

Display: 4-digit LCD

Min: Yes

Max: Yes

AlarmIndicators: UnderandOver(visualon-screen)

AutoShut-off: Yes(after30mins/off)

Tripod Mountable: Yes

Low Battery Indicator: Yes

Power Supply: 9V battery

Output: Yes(AC/DC)

BatteryLife: Approx50hours

Product Certications: CE, IEC 61672-1 Class 2

OperatingTemperature: 32to104°F(0to40°C)

StorageTemperature: 14to140°F(-10to60°C)

OperatingHumidityRange: 10to90%

Dimensions: 10.2x2.2x1"(258x55x25mm)

Weight: 6.5oz(185g)

www. .com information@itm.com1.800.561.8187

Instrument Description

1. Windscreen

2. Display

3. Power Button

4. Up Arrow

(LevelRangeIncrease)

5. Down Arrow

(LevelRangeDecrease)

6. Frequency Weighting

Button

7. MIN/MAXHoldButton

8. Time Weighting Button

9. Microphone

10. AC/DC Output Terminal

11. Tripod Mounting Screw

12. Battery Cover

Display Description

Bar Graph Indicator

Reading Indicator

Battery Capacity Indicator

C-Weighting Indicator

Auto Power Off Indicator

Under Range Indicator Minimum/Maximum

Value Hold Indicator

Fast Response Indicator

Slow Response Indicator

Over Range Indicator

Calibration Mode Indicator

A-Weighting Indicator

www. .com information@itm.com1.800.561.8187

Operating Instructions

1. Turn the meter on by pressing the Power Button.

2. Press the Time Weighting Button to select the desired Response

Time. If the sound source consists of short bursts, set the response

to FAST. To measure average sound level, select SLOW.

3. Press the Frequency Weighting Button to select the Frequency.

Select "A" Weighting for a general noise sound level, or "C"

Weighting for measuring high level noise. "C" Weighting is a stan-

dard weighting of the audible frequencies commonly used for the

measurement of Peak Sound Pressure Level. If the "C" Weighted

level is much higher than the "A" Weighted level, then there will be a

large amount of low-frequency noise.

4. Press the UP and DOWN arrows to select the desired dB range.

Choose a dB range in which the measured level is registering

approximatelyinthemiddleofthebargraph.Iftheoverrange

indicator appears during your measurement, the upper limit of the

selecteddBrangehasbeenexceeded.AdjusttheselecteddBrange

until the over range indicator disappears from the screen. Further-

more, if the under range indicator appears during your measurement,

the lower limit of the selected dB range is too high to register your

measurement.AdjusttheselecteddBrangeuntiltheunderrange

indicator disappears.

5. Holdtheinstrumentcomfortablyinonehand(awayfromyourbody)

or position it on a tripod for long-term monitoring. Point the micro-

phone in the direction of the noise to take a measurement.

NOTE: Direct contact with strong winds or blowing air on the microphone

may cause measurement errors. These effects can be reduced by using

the included windscreen.

MIN/MAX Hold

PresstheMIN/MAXHoldbuttontodisplaytheMaximumandMinimum

sound level values recorded during the measurement process.

PresstheMIN/MAXHoldButtononcetodisplaythemaximumvalue.

2. Press the button again to display the minimum value.

3. Press and hold the button once more to resume normal operation.

continued...

www. .com information@itm.com1.800.561.8187

Auto Power OFF

To preserve battery life, the meter is programmed to turn itself off after 30

minutes of inactivity. To turn this function off, while the meter is off, press

and hold the Time Weighting Button while turning the meter on. When the

meter turns on release both the Time Weighting Button and Power button.

The Auto Power Off indicator will not appear on the display, conrming

this feature is now disabled. If the meter is turned off then back on, the

"Auto Power Off" feature will be enabled again.

Calibration Procedure

InordertocalibratetheR8060anexternalcalibratorthatcanprovidea

94.0dBsignalisrequired(REEDR8090).Ifthemeterhasbeenexposed

toextremeconditionsorhasnotbeenusedinalongperiodoftimethe

meter should be calibrated by following steps 1 through 6 below.

1. Remove windshield ball.

2. Whilethemeterisoff,pressandholdtheMIN/MAXHoldbutton

while turning the meter on.

3. Whenthemeterturnson,releaseboththeMIN/MAXHoldandPower

button to enter calibration mode as indicated on-screen by "CAL 94dB".

4. Insert the microphone into the calibrator.

5. Press the UP and DOWN arrow buttons to increase or decrease the

dB level to match the Sound Calibrator output.

6. Once the desired dB level has been attained press the MIN/MAX

buttontosavethesettingandexitthecalibrationmode.

NOTE:PressthePowerbuttontoexitthecalibrationmodeatanytime.

OFF

94dB 114dB

(1KHz)

IEC 942 CLASS 2

R8090

Sound Level Calibrator

www. .com information@itm.com1.800.561.8187

Battery Replacement

Periodically check the Battery Indicator on the display. When there are no

more bars on the Battery Indicator the batteries will need to be replaced.

Remove the battery cover on the back and insert a new 9V Battery.

AC/DC Signal Output Jack

ThemeterisequippedwithanAC/DCoutputjacktoconnectand

integratewithexternalsystems.Forexample,theACoutputcanbeused

with a frequency analyzer or oscilloscope to identify the frequency level

during a measurement. The DC output is used to identify the dB level

during a measurement.

AC/DC Output Connector 3.5mm Sub-Miniature Phone Jack

Connector Diagram

AC Output Voltage Range 1VrmsatFS(fullscale)

(FSreferstotheupperlimitoftheselected

dBlevelrange.Forexampleif30-90dBis

theselectedlevelrange,1Vrms=90dB)

DC Output Voltage Range 10 mV/dB

www. .com information@itm.com1.800.561.8187

Applications

• PreventativeMaintenance

• IndustrialMachinery/Equipment

• ConstructionSites

• EnsuringSafeWorkingConditions

• PublicVenues/Concerts

• CodeEnforcement

• Trafc

• ApplianceNoiseTesting

Accessories and Replacement Parts

SB-01 Replacement Windshield Ball

CA-05A Soft Carrying Case

R8888DeluxeHardCarryingCase

R8090 Sound Level Calibrator

R1500 Tripod

Don't see your part listed here? For a complete list of all accessories and

replacement parts visit your product page on www.reedinstruments.com.

Product Care

To keep your instrument in good working order we recommend the following:

• Storeyourproductinaclean,dryplace.

• Changethebatteryasneeded.

• Ifyourinstrumentisn'tbeingusedforaperiodofonemonthorlonger

please remove the battery.

• Cleanyourproductandaccessorieswithbiodegradablecleaner.Donot

spraythecleanerdirectlyontheinstrument.Useonexternalpartsonly.

www. .com information@itm.com1.800.561.8187

Product Warranty

REED Instruments guarantees this instrument to be free of defects in

materialorworkmanshipforaperiodofone(1)yearfromdateofshipment.

During the warranty period, REED Instruments will repair or replace, at no

charge, products or parts of a product that proves to be defective because

of improper material or workmanship, under normal use and maintenance.

REED Instruments total liability is limited to repair or replacement of the

product. REED Instruments shall not be liable for damages to goods,

property, or persons due to improper use or through attempts to utilize the

instrumentunderconditionswhichexceedthedesignedcapabilities.In

order to begin the warranty service process, please contact us by phone at

1-877-849-2127 or by email at info@reedinstruments.com to discuss the

claim and determine the appropriate steps to process the warranty.

Product Disposal and Recycling

Please follow local laws and regulations when disposing or recycling your

instrument. Your product contains electronic components and must be

disposed of separately from standard waste products.

Product Support

If you have any questions on your product, please contact your authorized

REED distributor or REED Instruments Customer Service by phone at

1-877-849-2127 or by email at info@reedinstruments.com.

Please visit www.REEDINSTRUMENTS.com for the most

up-to-date manuals, datasheets, product guides and software.

Product specifications subject to change without notice.

this manual is strictly prohibited without prior written permission

from REED Instruments.

www. .com information@itm.com1.800.561.8187

Tabla de contenidos

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario