Radio Shack 15-1931 Manual de usuario

Cat. No. 15-1931

OWNER’S MANUAL

3-in-One Easy Remote Control

Please read before using this equipment.

15-1931.fm Page 1 Monday, July 19, 1999 2:26 PM

Need help? Call

1-888-533-7135

FEATURES

Your RadioShack 3-in-One Easy Remote Con-

trol can replace up to three infrared remote con-

trols. You can use it to control your TV, VCR, or

cable converter. Unlike some universal remote

controls, your remote control is preprogrammed

with the most commonly used commands and

does not have to learn its commands from the

original remote controls. All you have to do is tell

it which TV, VCR, or cable converter’s remote

controls you want to replace (by entering 3-digit

codes).

This manual includes a list of many manufactur-

ers’ 3-digit codes for TVs, VCRs, and cable con-

verters.

Your remote control’s features include:

Powerful Infrared Beam — so you can operate

your remote-controlled devices from a greater

distance than with many of the original remote

controls.

Glow-in-the-Dark Ke

s — some of the remote

control’s keys glow so you can see them even in

a dimly lit room.

Hand

Reference Label — provides a conve-

nient place for you to write down the manufactur-

ers’ codes for your devices.

Convenient Ke

pad Desi

n— each key is posi-

tioned for easy operation.

Toll Free Support — you can get expert help for

your remote control by calling 1-888-533-7135.

Note: You need four AAA batteries (not supplied)

to power your 3-in-One Easy Remote Control.

Plug ’n Power and RadioShack are registered trademarks

used by Tandy Corporation.

X-10 is a registered trademark of X-10 (USA) Inc.

15-1931.fm Page 2 Monday, July 19, 1999 2:26 PM

Need help? Call

1-888-533-7135

CONTENTS

How the 3-in-One Works ............................... 4

Preparation ..................................................... 5

Installing Batteries ...................................... 5

Device Types ............................................. 6

Setting Up Your Remote Control ................ 6

Operation ........................................................ 8

Punch-Through .......................................... 8

Turning Punch-Through Off/On .......... 8

Favorite Channel Scan .............................. 9

Clearing Favorite Channel Scan ....... 10

If You Have Problems .................................. 11

Manual Code Search ............................... 11

Determining the 3-Digit Code ........... 12

Troubleshooting ....................................... 12

Manufacturers’ Codes ................................. 13

Cable Converters ..................................... 13

Televisions ............................................... 15

TV/VCR Combinations ............................. 20

VCRs ........................................................ 21

Care and Maintenance ................................. 27

Specifications .............................................. 28

15-1931.fm Page 3 Monday, July 19, 1999 2:26 PM

Need help? Call

1-888-533-7135

HOW THE 3-IN-ONE WORKS

Your RadioShack 3-in-One Easy Remote Control

was designed to control the most commonly used

functions on your TV, VCR, and cable converter.

When you set up the remote control, its command

keys work like the keys on your original remote

controls. For example, the remote control’s PWR

key works like a key on your original remote con-

trol which might be labeled POWER ON/OFF.

Notes:

• Whenever you use REC

on the remote

control, you must press it twice. This safety

feature helps you avoid accidentally record-

ing over tapes.

• The remote control might not be able to

duplicate some of your original remote con-

trol’s seldom-used functions.

Function

PUsed in setting up your

devices.

PWR, digit keys,

CH , CH ,

VOL , VOL ,

M, LAST

Operate the same as the cor-

responding keys on your origi-

nal remote control.

VCR, CBL. TV Used when you set up the

remote controlto replace your

original remote controls. Also

used during normal operation

to tell the remote control

which device you want to con-

trol.

SCAN Used to scan through a list of

favorite channels.

REC , PLAY ,

PAUSE ,

REW, STOP,

Control VCR functions and

are used to selectoptions and

navigate in your TV or cable

converter.

15-1931.fm Page 4 Monday, July 19, 1999 2:26 PM

Need help? Call

1-888-533-7135

PREPARATION

INSTALLING BATTERIES

Your remote control requires four AAA batteries

(not supplied) for power. For the best perfor-

mance and longest life, we recommend alkaline

batteries such as RadioShack Cat. No. 23-555.

Cautions:

• Use only fresh batteries of the required size

and recommended type.

• Do not mix old and new batteries or different

types of batteries.

• Do not press any of the remote control’s

keys while installing batteries.

Note: The remote control’s built-in memory back-

up saves any programmed codes for about a

minute after the batteries have been removed.

We recommend you have fresh batteries ready to

install as soon as you remove the old ones.

1. Press the battery compart-

ment cover’s tab and lift off

the cover.

2. Place the batteries in the

compartment as indicated

by the polarity symbols (+

and

–) marked inside.

3. Replace the cover.

When the remote control’s range decreases or it

stops operating properly, replace the batteries.

15-1931.fm Page 5 Monday, July 19, 1999 2:26 PM

Need help? Call

1-888-533-7135

Cautions:

• Always remove old or weak batteries. Batter-

ies can leak chemicals that can destroy elec-

tronic parts.

• Dispose of old batteries promptly and prop-

erly. Do not burn or bury them.

Note: Do not place objects on top of the remote

control after you have installed the batteries. This

can press keys for an extended period of time and

reduce battery life.

DEVICE TYPES

You can use the remote control’s device keys to

control the following general types of devices:

TV — TVs

VCR — VCRs and TV/VCR combinations

CBL — Cable converters

SETTING UP YOUR REMOTE

CONTROL

1. Refer to “Manufacturers’ Codes” on Page 13

and write down the codes for your original

remote controls on the supplied label.

Notes:

• Some manufacturers have several codes

listed. Try each until you find the right one.

See “If You Have Problems” on Page 11 if

you cannot find the correct code.

• If you want to set up your remote control to

control a combination TV/VCR (such as

Cat. No. 16-421 or 16-422), you must pro-

gram the TV code for the TV functions

and

the VCR code for the VCR functions.

15-1931.fm Page 6 Monday, July 19, 1999 2:26 PM

Need help? Call

1-888-533-7135

2. Press the device key for the type of remote

you are replacing (TV, VCR, or CBL). The red

light blinks.

3. Hold down Puntil the red light blinks twice,

then enter the 3-digit code.

For example, to replace a TV’s remote con-

trol (manufacturer’s code 185), press TV,

hold down Puntil the red light blinks twice,

then press 1, 8, and 5.

When the red light blinks twice, the remote

control has accepted the code.

Note: If the code you entered is invalid, the

red light does not blink.

4. Point the remote control at your device and

press PWR. Your device should turn off (or

on, if it was off).

If the remote does not operate your device,

try the other codes listed in “Manufacturers’

Codes” on Page 13 for your brand of TV,

VCR, cable converter, or other device.

5. Repeat Steps 2–4 for additional devices.

15-1931.fm Page 7 Monday, July 19, 1999 2:26 PM

Need help? Call

1-888-533-7135

OPERATION

1. Press the device key for the device you want

to control, then point the remote control at

the device and press PWR to turn the device

on.

2. Repeat Step 1 for all other devices you want

to operate.

3. Press the appropriate device key and the

desired command keys.

Note: The command keys on the remote

control work the same as the keys on the

original remote control; however, the labeling

might differ slightly.

4. To turn off the last device you selected, press

PWR. To turn off other devices, press the

device key for the device you want to turn off,

then press PWR.

PUNCH-THROUGH

The punch-through feature lets you alternately

control two different devices without pressing the

device keys for each one. Here’s how it works.

Not all of the remote control’s keys are used by

every device. For example, a TV is often the only

device that uses the volume keys. After you press

TV, then press VCR, you can still use the volume

control to control the TV.

Note: The punch-through feature might not work

if the lasttwo devices you selected havethe same

(or similar) features. For example, most TVs and

some cable converters have channel select keys

on their remote controls.

Turning Punch-Through Off/On

If your cable box or VCR has a volume control,

you might want to turn off punch-through so you

can use the cable box’s or VCR’s volume control

15-1931.fm Page 8 Monday, July 19, 1999 2:26 PM

Need help? Call

1-888-533-7135

to control the sound. To turn off punch-through,

hold down Puntil the red light blinks twice, then

press 9 9 3 and the device key.

If you want to control the volume through your ca-

ble box, press CBL before using the volume con-

trol. If you want to control the volume through your

VCR, press VCR before using the volume control.

To turn punch-through back on, hold down Puntil

the red light blinks twice, then press 9 9 3 VOL .

FAVORITE CHANNEL SCAN

You can use your remote control to scan through

up to 10 of your favorite channels on your TV,

VCR, or cable box.

Note: You can scan channels only for one device

(TV, VCR, or CBL) at a time. You cannot set up a

favorite channel list for another device until you

clear the existing list.

1. Press the device key for the device with the

channels you want to program (TV, VCR, or

CBL). The red light blinks.

2. Hold down Puntil the red light blinks twice,

then press 9 9 6.

3. Enter the channel number of the first channel

you want to include in your favorite channel

list. Then press P.

Notes:

• Precede a single-digit number with a 0 —

for example, 01, 02, and so on.

15-1931.fm Page 9 Monday, July 19, 1999 2:26 PM

Need help? Call

1-888-533-7135

• If you enter a three-digit number, you do

not need to press Pafter entering the

number.

4. Repeat Step 3 for other channels (up to 10)

you want to include in your list. Then hold

down Puntil the red light blinks twice.

5. To scan through the favorite channel list,

press the device key for the device you want

to tune (TV, VCR, or CBL), then press SCAN.

The remote control repeatedly scans through

the favorite channel list, stopping on each

channel for about 3 seconds.

6. Press any key other than SCAN when you

see a channel you want to watch. Scanning

stops.

Clearing Favorite Channel Scan

You must clear the channels in your favorite

channel scan list if you want to change them.

1. Hold down Puntil the red light blinks twice.

2. Press 9 9 6, then hold down Puntil the red

light blinks twice.

15-1931.fm Page 10 Monday, July 19, 1999 2:26 PM

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Mando a distancia de Radio Shack

Radio Shack

Radio Shack 7-in-1 Remote Control with Lighted Keypad Manual de usuario

Radio Shack

Radio Shack TOUCHSCREEN REMOTE Manual de usuario

Radio Shack

Radio Shack Keychain Manual de usuario

Radio Shack

Radio Shack Wireless Security Keychain Remote Manual de usuario

Radio Shack

Radio Shack Remote Control Manual de usuario

Radio Shack

Radio Shack Kameleon Manual de usuario

Radio Shack

Radio Shack 6-in-1 Remote Control Manual de usuario

Radio Shack

Radio Shack 15-2147 - Universal Remote Manual de usuario

Radio Shack

Radio Shack Kameleon 4-in-1 Manual de usuario

Radio Shack

Radio Shack Kameleon Manual de usuario

Radio Shack

Radio Shack 8-IN-ONE REMOTE Manual de usuario

Radio Shack

Radio Shack Univer 15-2138 Manual de usuario

Radio Shack

Radio Shack 2-in-1 Remote Control Manual de usuario

Radio Shack

Radio Shack 15-303 Manual de usuario

Radio Shack

Radio Shack 15-2146 - Voice Prompt Universal Remote Manual de usuario

Radio Shack

Radio Shack 7-in-One IR Manual de usuario

Radio Shack

Radio Shack 7-in-One Home Theater Manual de usuario

Radio Shack

Radio Shack 15-310 Manual de usuario

Radio Shack

Radio Shack 15-309 Manual de usuario

Radio Shack

Radio Shack 15-1995 Manual de usuario

Radio Shack

Radio Shack 15-1915B Manual de usuario

Radio Shack

Radio Shack 63-1166 Manual de usuario

Radio Shack

Radio Shack Audio/ Video Remote Control Manual de usuario

Radio Shack

Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación