Radio Shack 15-310 Manual de usuario

15-310

User’s Guide

Big Button

Universal Remote Control

Thank you for purchasing your Big Button Universal

Remote Control from RadioShack. Please read this

user’s guide before installing, setting up, and using your

new remote control. 1/3

Package Contents

Features

• Operatesuptothreedevices

• Largeeasy-to-seebuttons

1Install the Batteries

1. Removethebatterycover.

2. InserttwoAAAbatteries(notincluded)bymatching

thepolaritysymbols(+/–)markedinside.

3. Replacethebatterycover.

AAA

User’s

Guide

Code List

Remote

control

MUTE

Turnoffthesound

•Displaythemenufor

theselecteddevice

•Inmenus,activate

anddeactivatesthe

alternativefunction

ofthemulti-function

keys.

SET

Activatesetupforthe

remote

CH +/–

Selectthenextor

previouschannel

0-9

Directlyenterchannels

–

Accesssubchannels

onaTVorreceiver

Red LED

ASPECT

Changeviewing

options(4:3or16:9)

Turnonoroffaselected

device

Device Keys

Selectadevicetocontrol

VOL +/–

Adjustthevolume

ENTER

Presstoenterthechannel

number

Multi-function keys

•ControlyourVCRorDVD

player

•Inmenus,thekeysstand

forleft(),up(),right

(),OK(),down()

andexit()

•Keysreturntotheir

originalfunctionifnokeys

arepressfor10sec.

2Setup

YouruniversalremotecanoperateaTV,VCR,DVD,cable

orsatellite.

Setupyouruniversalremoteinoneofthreeways:

• Brand Code Setup: Directlyenterthedevicecode

fromtheCodeList.Tryeachcodeuntilyoundone

thatworksforyourdevice.

• Auto Code Search: Youruniversalremote

automaticallygoesthroughallthedevicecodes.

(Thismethodcantakeupto45minutestosearchall

thecodesforthe3devices.)

• Manual Code Search: Manuallygoesthrougheach

codeforyourdeviceonebyoneatthetouchofthe

G button.

n Note:

Keep your remote pointed at the device that

you want to program throughout setup.

Brand Code Setup

1. Poweronthedevicethatyouwanttocontrol.

2. Findthecode(orcodes)foryourdeviceinthe

includedCode List.Ifyourdevice’sbrandisnot

listed,usethe Auto Code Search orManual Code Search

method.

3. Onyouruniversalremote,pressandholdSET,and

thenpressadevicekey(TV,VCR/DVDorSTB/CBL).

TheredLEDlightsandstayslit,indicatingthatthe

remoteisinsetupmode.Releasebothbuttons.

n Note: Do not hold down the keys for longer

than three seconds or the remote enters auto search

mode.

4. Entertherst3-digitcodeforyourdeviceandbrand.

Pausebrieybetweeneachdigittomakesurethe

remotereceivesallinputs.TheredLEDashes

wheninputisreceived,thenturnsoffifyouentered

therightcode.IftheredLEDstayslit,enterthe

nextcodeforyourdeviceandbrand.Repeatforall

possiblecodesuntiltheredLEDturnsoff.

5. Verifythesetupbytestingtheremotecontrol’s

buttonsandfunctions.Ifsomeofyourdevice’s

functionsdonotrespondtotheremote,repeatsteps

3-5withanothercode.

nNotes:

• Ifyouwanttoquitduringdevicesetup,pressthe

device key or wait 10 seconds for the remote to exit

setup automatically.

• Ifyouareuncertainaboutyour3-digitcodeentry,

follow “Check Current Brand Code” on page 9 to conﬁrm

your code.

• Ifyou’vetriedallthecodesforyourdeviceinthe

Code List and your universal remote still does not

work, follow steps for Auto Code Search or Manual Code

Search.

Auto Code Search

AutoCodeSearchautomaticallysendsdevicecodesto

thedevicethatyouwanttocontrol.

1.

Poweronthedevicethatyouwanttocontrol.For

VCRsandDVDplayers,youmustinsertatapeordisc.

2.

Onyouruniversalremote,pressandholdSET,then

pressandholdadevicekey(TV,VCR/DVDorSTB/

CBL).Continuetoholddownbothkeysformorethan

threeseconds.TheredLEDashesandtheuniversal

remotestartssearching.Releasebothbuttons.

3. Whenthedevicerespondsinanyway(switches

off,play,pause,volumechange,channelchanges),

pressanykeyotherthanSETwithintwosecondsto

conrmthecode.TheredLEDwillstopashing.

4. Verifythesetupbytestingvariouskeysand

functions.PressGonyouruniversalremotetoturn

onthedeviceifitturnedoffinstep3.Ifsomeofyour

device’sfunctionsdonotrespondtotheremote,

repeatsteps2-4.

nNotes:

• BecauseAutoCodeSearchrequiresyoutostopthe

search, you must remain with the device during the

process.

• Tostopsearching,pressanykey(exceptSET). The

red LED light turns off and the search stops.

• Duringasearch,youcanpressSET to change search

direction from forward to backward or vice versa.

Manual Code Search

ManualCodeSearchsendscodestothedeviceyouwant

tocontrolonebyoneatthetouchoftheGbutton.

1. Poweronthedevicethatyouwanttocontrol.For

VCRsandDVDplayers,youmustinsertatapeor

disc.

2. Ontheuniversalremote,pressandholdSET,then

pressadevicekey(TV,VCR/DVDorSTB/CBL).The

redLEDlightsupandstayslit,indicatingtheremote

isinsettingmode.Releasebothbuttons.

n Note: Do not hold down the keys for longer

than three seconds or the remote enters auto search

mode.

3. PressGontheuniversalremote.Theuniversal

remoteentersmanualcodesearchmodeandthe

redLEDashes.

4. PressGrepeatedlyonyouruniversalremoteuntil

thedeviceturnsoff.(EachpressoftheGkeysends

adifferentcodetoyourdevice.)

Whenthedeviceturnsoff,thecodeiscorrect.Press

thedevicekeyonyouruniversalremotewithin10

secondstoconrmthecode.

5. PressG onyouruniversalremotetoturnyourdevice

backon.

6. Verifythesetupbytestingvariouskeysandfunctions.

Ifsomeofyourdevice’sfunctionsdonotrespondto

theremote,repeatsteps2-6.

nNotes:

• Duringasearch,youcanpressSET to change search

direction from forward to backward or vice versa.

• Ifnokeysarepressedin10seconds,searchstops.

Operation

Check Current Brand Code

Forfuturereferenceandtosavetimeifyoueverneed

tosetupyourremoteagain,retrieveandwritedown

yourdevicecodesforeachdevicekeyonyouruniversal

remote.



Completethefollowingstepstocheckthecodenumber

foraspecicdevice.TheredLEDonyouruniversal

remotewillashtoindicatethecodes.

1. Pressthedevicekeyonyouruniversalremote.

2. Tochecktherstdigit,pressandholdSET,then

pressnumericalkey1.TheredLEDwillash

repeatedlytoindicatetherstdigit.(oncefor1,

twicefor2,etc.IftheredLEDdoesnotash,this

indicatesthattherstdigitis“0.”)

3. Tochecktheseconddigit,pressandholdSET,then

press 2.TheredLEDwillashrepeatedlytoindicate

theseconddigit.

4. Tocheckthethirddigit,pressandholdSET,then

press3.TheredLEDwillashrepeatedlytoindicate

thethirddigit.

Lock Device

Lockthedevicecodeinyourremotesoitdoesn’tget

changedordeletedunintentionally.

To lock in the code for your current device:

1. Pressthedevicekeythatyouwanttolockonyour

universalremote.

2. HolddownSET,thenpress7.TheredLEDblinks

twice.Thecodeforthecurrentdeviceisnowlocked

andcannotbeoverwritten.

3. Tounlockthecurrentdevicekey,pressandholdSET,

thenpress8.TheredLEDblinkstwice.

nNote:

• Thelockeddevicescannotbechangeduntilyou

unlock the current device key or reset your remote.

• Tounlockacodeotherthanthecurrentone,pressthat

devicekeybeforefollowingstep3.

Tabla de contenidos

Otros manuales de Mando a distancia de Radio Shack

Radio Shack

Radio Shack 15-309 Manual de usuario

Radio Shack

Radio Shack Kameleon 4-in-1 Manual de usuario

Radio Shack

Radio Shack Kameleon 4-in-1 Manual de usuario

Radio Shack

Radio Shack Univer 15-2138 Manual de usuario

Radio Shack

Radio Shack Remote Control Manual de usuario

Radio Shack

Radio Shack 8-IN-ONE REMOTE Manual de usuario

Radio Shack

Radio Shack 15-1990 Manual de usuario

Radio Shack

Radio Shack Kameleon Manual de usuario

Radio Shack

Radio Shack 6-in-1 Remote Control Manual de usuario

Radio Shack

Radio Shack 7-in-1 Remote Control with Lighted Keypad Manual de usuario

Radio Shack

Radio Shack TOUCHSCREEN REMOTE Manual de usuario

Radio Shack

Radio Shack 4 Manual de usuario

Radio Shack

Radio Shack 15-1925 Manual de usuario

Radio Shack

Radio Shack 15-1995 Manual de usuario

Radio Shack

Radio Shack 15-1931 Manual de usuario

Radio Shack

Radio Shack 7-in-One IR Manual de usuario

Radio Shack

Radio Shack Keychain-Remote Control System Manual de usuario

Radio Shack

Radio Shack Kameleon Manual de usuario

Radio Shack

Radio Shack 15-2147 - Universal Remote Manual de usuario

Radio Shack

Radio Shack Keychain Manual de usuario

Radio Shack

Radio Shack 2-in-1 Remote Control Manual de usuario

Radio Shack

Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE Manual de usuario

Radio Shack

Radio Shack 7-in-One Home Theater Manual de usuario

Radio Shack

Radio Shack 63-1166 Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación