Radio Shack 15-309 Manual de usuario
15-309
User’s Guide
Slim Universal Remote Control
Thank you for purchasing your Slim Universal
Remote Control from RadioShack. Please read this
user’s guide before installing, setting up, and using
your new remote control.
2
Contents
Package contents ............................................................................................................ 3
Features............................................................................................................................ 3
1 Remove Plastic Tab ......................................................................................................3
2 Setup ............................................................................................................................ 5
Brand Code Setup ..........................................................................................................................5
Auto Code Search...........................................................................................................................7
Manual Code Search.......................................................................................................................8
Operation......................................................................................................................... 9
Check Current Brand Code.............................................................................................................9
Lock Device...................................................................................................................................10
Lock Volume and Mute .................................................................................................................11
Reset Your Universal Remote........................................................................................................11
Replace the Battery.......................................................................................................................12
Additional Information ................................................................................................... 13
Troubleshooting ............................................................................................................................13
Specifications ................................................................................................................................15
FCC Information............................................................................................................................15
Limited Warranty...........................................................................................................................16
3
Setup
Package contents
Features
• Operatesuptothreedevices
• Controls TV volume regardless of mode
1Remove Plastic Tab
Your remote control comes with a 3V, CR2032 button cell
battery.
Remove the plastic tab to enable battery contact before
using your remote control for the first time.
User’s
Guide
Code List
Remote control
with battery
4
Setup
CH+/– Select the next or
previous channel. Select the
next or previous chapter on
some DVD players.
Device Keys – Press to select a
device to control: TV, VCR/DVD,
Set Top Box (STB).
G– Turn on /off a selected device.
Red LED
VOL+/– Increase or
decrease the volume.
0~9 – To enter channel numbers.
– Confirm a selection.
–Access subchannels on a TV or
receiver.
Control your VCR or DVD
player. These functions are the
same as those on the device’s
original remote.
MUTE – Press to mute the sound.
CC – Closed caption.
MENU – Display the menu for
the selected device.
EXIT – Exit the selected device’s
menu, guide or program.
OK – Confirm a setting in Menu
mode.
– Move the cursor
through the program guide and
menu screens.
INPUT – Select the video inputs.
ASPECT – Select aspect ratio.
SET – Activate the setup mode.
PIP – Switch the Picture-
in-Picture feature on/off (if
available on your TV).
5
Setup
2Setup
Your universal remote can operate a TV, set top box (STB), VCR or DVD player.
Set up your universal remote in one of three ways:
• Brand Code Setup: Directly enter the device code from the Code List. Try each
code until you find one that works for your device.
• Auto Code Search: Your universal remote automatically goes through all the
device codes. (This method can take up to 45 minutes to search all the codes for
the 3 devices.)
• Manual Code Search: Manually goes through each code for your device one by
one at the touch of the G button.
n Note:
Keep your remote pointed at the device that you want to program throughout setup.
Brand Code Setup
1. Power on the device that you want to control.
2. Find the code (or codes) for your device in the included Code List. If your device’s
brand is not listed, use the Auto Code Search or Manual Code Search method.
6
Setup
3. Onyouruniversalremote,pressandholdSET, and then press a device key (TV,
VCR/DVD or STB). The red LED lights and stays lit, indicating that the remote is in
setup mode. Release both buttons.
n Note: Do not hold down the keys for longer than 3 seconds or the remote enters
auto search mode.
4. Enter the first 3-digit code for your device and brand. Pause briefly between each
digit to make sure the remote receives all inputs. The red LED flashes when input is
received, then turns off if you entered the right code. If the red LED stays lit, enter
the next code for your device and brand. Repeat for all possible codes until the red
LED turns off.
5. Verify the setup by testing the remote control’s buttons and functions. If some of
your device’s functions do not respond to the remote, repeat steps 3-5 with another
code.
nNotes:
• Ifyouwanttoquitduringdevicesetup,pressthedevicekeyorwait10secondsforthe
remote to exit setup automatically.
• Ifyouareuncertainaboutyour3-digitcodeentry,follow“Check Current Brand Code” on
page 9 to confirm your code.
• Ifyou’vetriedallthecodesforyourdeviceintheCode List and your universal remote still
doesnotwork,followstepsunder Auto Code Search or Manual Code Search.
7
Setup
Auto Code Search
Auto Code Search automatically sends device codes to the device that you want to
control.
1. Power on the device that you want to control. For VCRs and DVD players, you must
insert a tape or disc.
2. Onyouruniversalremote,press and hold SET, then press and hold a device key
(TV, VCR/DVD or STB). Continue to hold down both keys for more than 3 seconds.
The red LED flashes and the universal remote starts searching. Release both
buttons.
3. When the device responds in any way (switches off, play, pause, volume change,
channel changes ), press any key other than SET within 2 seconds to confirm the
code. The red LED will stop flashing.
4. Verify the setup by testing various keys and functions. Press Gon your universal
remote to turn on the device if it turned off in step 3. If some of your device’s
functions do not respond to the remote, repeat steps 2-4.
nNotes:
• BecauseAutoCodeSearchrequiresyoutostopthesearch,youmustremainwiththe
device during the process.
• Tostopsearching,pressanykey(exceptSET).Thered LED light turns off and search
stops.
8
Setup
Manual Code Search
Manual Code Search sends codes to the device you want to control one by one at the
touch of the Gbutton.
1. Power on the device that you want to control. For VCRs and DVD players, you must
insert a tape or disc.
2. Ontheuniversalremote,pressandholdSET, then press a device key (TV, VCR/
DVD or STB). The red LED lights up and stays lit, indicating the remote is in setting
mode. Release both buttons.
n Note: Do not hold down the keys for longer than 3 seconds or the remote enters
auto search mode.
3. Press Gon the universal remote. The universal remote enters manual code search
mode and the red LED flashes.
4. Press Grepeatedly on your universal remote until the device turns off. (Each press
of the Gkey sends a different code to your device.)
When the device turns off, the code is correct. Press the device key on your
universal remote within 10 seconds to confirm the code.
5. Press G on your universal remote to turn your device back on.
6. Verify the setup by testing various keys and functions. If some of your device’s
functions do not respond to the remote, repeat steps 2-6.
9
Operation
nNotes:
• Duringasearch,youcanpressSET to change search direction from forward to
backwardorviceversa.
• Ifnokeysarepressedin10seconds,searchstops.
Operation
Check Current Brand Code
For future reference and to save time if you ever need to set up your remote again,
retrieve and write down your device codes for each device key on your universal remote.
Complete the following steps to check the code number for a specific device. The red
LED on your universal remote will flash to indicate the codes.
1. Press the device key on your universal remote.
2. To check the first digit, press and hold SET, then press numerical key 1. The red
LED will flash repeatedly to indicate the first digit. (once for 1, twice for 2, etc. If the
red LED does not flash, this indicates that the first digit is “0.”)
10
Operation
3. To check the second digit, press and hold SET, then press 2. The red LED will flash
repeatedly to indicate the second digit.
4. To check the third digit, press and hold SET, then press 3. The red LED will flash
repeatedly to indicate the third digit.
Lock Device
Lock the device code in your remote so it doesn’t get changed or deleted
unintentionally.
To lock in the code for your current device:
1. Press the device key that you want to lock on your universal remote.
2. Hold down SET, then press 7. The red LED blinks twice. The code for the current
device is now locked and cannot be overwritten.
3. To unlock the current device key, press and hold SET, then press 8. The red LED
blinks twice.
nNote:
• Thelockeddevicescannotbechangeduntilyouunlockthecurrentdevicekeyorreset
your remote.
• Tounlockacodeotherthanthecurrentone,pressthatdevicekeybeforefollowingthe
step 3 to unlock the current device key.
Tabla de contenidos
Otros manuales de Mando a distancia de Radio Shack
Radio Shack
Radio Shack Kameleon 4-in-1 Manual de usuario
Radio Shack
Radio Shack 8-IN-ONE REMOTE Manual de usuario
Radio Shack
Radio Shack 15-1990 Manual de usuario
Radio Shack
Radio Shack 15-1915B Manual de usuario
Radio Shack
Radio Shack 15-1931 Manual de usuario
Radio Shack
Radio Shack 7-in-One IR Manual de usuario
Radio Shack
Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE Manual de usuario
Radio Shack
Radio Shack Kameleon 4-in-1 Manual de usuario
Radio Shack
Radio Shack 4 Manual de usuario
Radio Shack
Radio Shack Kameleon Manual de usuario
Radio Shack
Radio Shack 15-2147 - Universal Remote Manual de usuario
Radio Shack
Radio Shack 7-in-1 Remote Control with Lighted Keypad Manual de usuario
Radio Shack
Radio Shack Keychain-Remote Control System Manual de usuario
Radio Shack
Radio Shack 15-303 Manual de usuario
Radio Shack
Radio Shack Wireless Security Keychain Remote Manual de usuario
Radio Shack
Radio Shack Light and Learn Remote Manual de usuario
Radio Shack
Radio Shack 63-1166 Manual de usuario
Radio Shack
Radio Shack 7-in-One Home Theater Manual de usuario
Radio Shack
Radio Shack 15-1995 Manual de usuario
Radio Shack
Radio Shack 15-1925 Manual de usuario
