Pyle PHUD19 Manual de usuario
PHUD19
PortableCarHeads-UpDisplay
Vehicle Speed & GPS Compass HUD Monitor System
www.PyleUSA.com
2
TO ENSURE YOUR UNIT IS SET UP AND FUNCTIONING PROPERLY IT IS CRUCIAL
YOU READ AND FOLLOW THIS USER MANUAL’S SET UP PROCEDURES.
Introduction
The unit is designed to display the driving information oering a safer
driving experience day to day as well as more importantly at high speeds
and during night driving. As it removes the need for the driver to dip their
head to view the instrument cluster. Installing this unit correctly will enable
you to more eectively monitor your speed, this is helpful for novice drivers
as well as experienced drivers in potentially
avoiding speeding infringements.
Installation
Put the unit near infront of the dashboard, then connect the USB car charger to
car cigarette lighter. Start the engine, the unit will power ON and search the
satellite number, the unit will work after few seconds.
Main Functions and Features
1. Compatible with all vehicle, easy installation, plug and play
2. TFT LCD multi color smart display
3. The language can be changed (Chinese or English)
4. Multi function display or simple function display can be switched freely
5. New Functions: Accelerating competitive mode. Brake performance test
6. Rich Contents: Driving speed, voltage, single driving distance, driving direction,
altitude, satellite numbers, system local time, driving trip time, over speed alarm,
switch freely between kilometers and miles.
www.PyleUSA.com
3
Key Functions
1. Setting Button: Push left/right, short press/press and hold IN
2. Light Sensor
3. USB Interface
Setting Button Functions
1. Short Press IN: (1) Switch for display mode (2) conrm the menu after entering
the menu
2. Push Left: (1) Switch for left area functions (2) change the function setting after
entering the menu
3. Push Right: (1) Switch for right area functions (2) change the function setting
after entering the menu
4. Long Press IN: After entering the menu and nish the setting, press and hold
for 5 seconds to save and exit.
Push Left/Right to switch function
Below are function abbreviations
GPS- The available satellites VLT- Voltage DIR- Driving Direction
Sys- Local System Time TIM- Trip Time DIS- Single Driving distance
ASL- Altitude
www.PyleUSA.com
4
Performance Testing
• Speedup Test
Shows the speed, distance, driving 400m takes time, driving 0-100km takes time
• Brake Test
Brake when the speed is over 60km/h, it will show brake distance and time
Setting Mode
Press and hold IN to enter into the setting mode, push right to choose the menu,
and short press IN to conrm. Once setting is done, press and hold to exit.
www.PyleUSA.com
5
Setting Functions
• Language Set: Please choose your familiar language (EN-English, CN-Simplied
Chinese, TW-Traditional Chinese)
• Sound Switch: Turn ON/OFF the buzzer
• Speed Alarm: Default value is 150
(the default value can be changed, push left to decrease, push right to increase)
• BAT Alarm: Default setting is OFF, turn right the setting button to open the BAT
Alarm and set the default alarm value.
• Speed Adjust: Adjust the speed according to the dashboard, default value is
107%
• Speed Oset: When the vehicle turns OFF, but the device speed is not 0, then
adjust the device Speed Oset value, If the device speed shows 5MPH, then
change the device Speed Oset default value at 5
• BAT Adjust: If the battery voltage is dierent with the vehicle, it can be adjusted.
• Change Color 1: Default color is white (top speed part in default interface)
• Change Color 2: Default color is red (left part in default interface)
• Change Color 3: Default color is green (right part in default interface)
• Brightness: Default is Auto, means Auto brightness adjustment.
• 1-Darkest
• 2 to 8, the brightness will increase
• 8 is the most bright.
• Speed Unit: Default is Mile, can be change to KM
• Power OFF Time: Default power o time is 180s, for Auto start and stop cars,
please make the power o time to 180-240s
• Sleep Voltage: Default is OFF, if the device can’t auto shut o, please adjust the
voltage at 13.2V or higher
• Time Adjust: When the device searched the satellite successfully, adjust the
device time as your local time and exit.
• Factory Set: Short press IN to reset in factory settings
www.PyleUSA.com
6
Technical Parameters:
Environment Temperature: -40c- + 80c
Atmospheric Pressure: 86-106KPa
Relative Humidity: 10% -95%
Environmental Noise: ≤60dB (a)
(A)Alarm Sound Level: ≥30dB(A)
Working Voltage: 9V ~ 16Vdc (12Vdc / 400mA)
Product Size: 73*68*46(cm)
Product Weight: 50g
Troubleshooting
1. No Power and Display on Screen
Start the car engine; check if the cable line is tight; or connect the USB to the
computer to check
2. Inaccurate Time
When the device searched the satellite successfully (The default is New York
time), set it to your local time then save and exit.
3. Inaccurate Speed
When the product is powered ON, press and hold IN button to enter into menu
option, and right push once switched to setting, then short press in the button
to the menu, and right push the button switch to the speed adjust option.
(If the dashboard shows 100, and the device shows the 101, change the default
value at 106%)
4. Over Speed Alarm
Default alarm is 150MPH, please refer to setting to change the value.
5. The Device cannot Auto Power OFF
After vehicle turns o, the device still displays the speed, switch the setting to
Speed Oset and adjust the value same as the device speed. (If the device
shows 5mph after the vehicle turns o, then change the speed oset at 5mph)
6. Wrong Operation Leads to Crash
Reset to factory setting.
www.PyleUSA.com
7
PHUD19
Portable Car Heads-Up Display
Vehicle Speed & GPS Compass HUD Monitor System
Features:
• Heads-Up Display System with Vehicle Readout
• 2.6’’-inch Digital Multi-Color Smart Display
• Mounts onto Dashboard for Driving Info Projection
• Convenient Vehicle Data: Displays Speed & GPS Compass
• New! Speed-Up and Brake Test Feature
• Dual Core Processor Chip for Real-Time Data
• Clear Readout Visibility in Day or Night Time Driving
• Integrated Light Sensors for Automatic Image Balance
• Automatic Sync, Power ON/OFF with Engine Ignition
• *Universal Compatibility for Automobile, Car, Truck, Vehicle
• Easy Set-Up: Plug and Play via Car Charging Port
What’s in the Box:
• HUD Interface
• Dashboard Housing Mount
• Power Cable Adapter
• Manual
Technical Specs:
• Alarm Sound Level: ≥ 30dB
• Power Cord Length: 8.2’Feet
• Working Voltage: 9V ~ 16Vdc (12Vdc / 400mA)
• Unit Dimensions (L x W x H): 2.87”x2.68”1.81” inches
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Pyle
Pyle
Pyle PLCAPE500 Manual de usuario
Pyle
Pyle PLCM4235 Manual de usuario
Pyle
Pyle PLCM4560 Manual de usuario
Pyle
Pyle PLRD146 Manual de usuario
Pyle
Pyle PLDCP1.2KIT Hoja de información del producto
Pyle
Pyle PLCMDVR 42 Manual de usuario
Pyle
Pyle PLPSC8 Manual de usuario
Pyle
Pyle PBT98 Manual de usuario
Pyle
Pyle PBT99 Manual de usuario
Pyle
Pyle PLCM9200 Manual de usuario
Pyle
Pyle PLCAPKT12 Hoja de información del producto
Pyle
Pyle PLCMTR83WIR Manual de usuario
Pyle
Pyle PIFMDK6 Manual de usuario
Pyle
Pyle PLCMTR26 Manual de usuario
Pyle
Pyle BlueTech PBT70R Manual de usuario
Pyle
Pyle PLCMRV8B Black Manual de usuario
Pyle
Pyle PLCM4300WIR Manual de usuario
Pyle
Pyle PLDCP3 Manual de usuario
Pyle
Pyle PLCM4565 Manual de usuario
Pyle
Pyle PLCM9200 Manual de usuario
