PROAIM PF-4TR Manual de usuario

23.9ft Fraser (PF-4TR) Jib crane with

PT-1000 Pan tilt head, FR-TS Stand and

FR-D Dolly

(PF-4TR-PP)

INSTRUCTION MANUAL

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any

means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied by

the applicable copyright statutes or in wring by the Publisher.

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 2

INTRODUCTION

PROAIM presents a fully professional 23.9 Fraser lm producon package, a perfect lming

soluon to increase your producon value. Fraser, a DV & Eng jib system has numerous features

to support & oer great performance. It is compable with many types of DV, HDV &broad

casng camera.

The triangular jib crane with high-intensity aluminium alloy structure ts smoothly & securely

with one another providing super rigidity and strength. Precisely designed 2-axis pan-lt

head adds creavity to your shots. Accompanied with various other benets, it completes the

package which is designed to enhance the cinemac quality.

IN THE BOX

Please inspect the contents of your shipped package to ensure you have received all that is

pictured and listed below.

Jib Secons

Jib Stand

Cables length & Qty :

(Red) 14 5 inch-1

(Red) 6 8 inch—1

(Red) 4 7inch—1

(Red) 3 8 inch—1

Cable Guide support rod

Hub locking knob

(Blue) 18 8 inch-1

(Blue)10 10inch-1

(Yellow)17 2inch-1

Dolly

Monitor Supporting Rods

Weight rod with weight closer

Locking pin

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 3

2 X joysck wires

1.(blue ring)

2.(yellow ring)

8meter 7 pin to 7 pin

XLR male wire (1PC)

5 pin lemo male to male

connecng wire (1PC)

3.5mm jack male to male

connecng wire (1 PC)

8meter BNC to BNC long

Connecng Wire (1PC)

4 pin XLR male to female

connecng wire (1PC)

2.5mm jack male to male

connecng wire(1PC) Lemo to din

connecng wire

(1PC)

1 meter BNC connecng

wire(1PC)

Pan Tilt Head 4X Knob

1x motor holding rod Focus & iris

Main Controlling box

Head control

handle

Camera control

handle

lemo to push or pull

connecng wire (1PC)

Main Ac adapter

(1 PC)

Pan lt wires

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 4

 Take out the bolt from the center of dolly and spread it on floor. Then put the bolt back through

the center of dolly again.

Note: To keep the dolly in stac posion

(non-movable), Lock down the wheels.

ASSEMBLING THE DOLLY

 Stretch the legs of jib stand on oor and in order to set the height of stand, loosen the bolts on

legs with the help of allen key and insert the locking pin for extra security of stand legs.

ATTACHING THE JIB STAND

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 5

 Now mount the jib Stand onto the dolly.

 Place the secon 2 with hub mounng on stand and ghten it with the hub locking knob to

secure it properly.

NOTE: For assembling the jib crane, Lock the pan and lt knobs.

Pan locking

knob.

Tilt Locking

knob

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 6

 Aach rst secon with second secon and ghten the allen bolts to secure it.

 Aach cable guide support rod to cable guide clamp on secon-2 and ghten the allen bolts

secon properly to secure it. Then aach the cable guide support rod onto the cable guide

clamp.

 Loosen the allen bolt, in order to

aach cable guide support rod to it.

ATTACHING THE CABLE GUIDE RODS

NOTE : Aach the rest of the secons in the same way starng from the other end of secon 2.

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 7

 Now aach hook to the cable guide rod on jib Secon-2. Then aach 4.7 red cable into the

hook & connect it to the clamp on jib secon –1.

 Now repeat the same steps to connect

the 3 8 inch cable from jib secon-2

and aach with clamp on jib secon-1

to clamp on jib secon : 1.

Cable code (red)

ATTACHING THE STABILITY CABLES

 Mount another hook to the cable guide rod on jib secon-2 then aach 6.8 red cable to the

hook and further clamp it on jib Secon-4 & adjust the cable with the help of wire tensioner.

Note: Repeat the same steps to connect 14.5 cable from jib Secon-2 with clamp on jib Secon-6

NOTE: You can adjust the cable with the help of wire tensioner.

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 8

 Aach 10.10 blue cable to the clamp on jib Secon-4 & aach it further to the clamp on Jib

Secon-1 & repeat the same steps for other side.

Cable code (blue)

 Align the cables to the cables guide side

rod.

 Note: Repeat the same steps to connect 18.8 blue cable to the clamp on jib Secon-6 &

aach it further to the clamp Jib Secon-1 & repeat the same steps for other side.

 Aach the 17.2 yellow cable to the hub secon and aach it with the head secon of jib

and adjusng the cable with the help of wire tensioner.

Cable code (Yellow)

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 9

 Aach the pan-lt head to the Head plate of crane and and secure it with the help of knobs.

ATTACHING THE PAN TILT HEAD

knobs

 Mount your camera on the mounng plate of pan lt head with the help of provided

checknut.

 Insert the silver 15mm rod into the

camera sliding plate to aach iris and

focus gear.

Proaim 23.9 Fraser (PF-4TR) Jib crane with PT-1000 Pan lt head, FR-TS Stand and FR-D Dolly 10

 Similarly, plug the lemo to din connector wire from camera to circuit board.

 Now Insert the gear into 15mm rod and aach the gear to the iris & lens focusing & iris ring of

your camera. Then plug the iris & focus cable from camera to circuit board.

 Plug the 5 pin male to male lemo wire from head to circuit board of head.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de vídeo profesionales de PROAIM

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM WKST-UPL-01 Manual de usuario

PROAIM

PROAIM TP-ULTM-01 Manual de usuario

PROAIM

PROAIM JB-VG04-01 Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM Victor Manual de usuario

PROAIM

PROAIM P-SFT-DT-12 Manual de usuario

PROAIM

PROAIM DL-SPIN-01 Manual de usuario

PROAIM

PROAIM P-HN-DMC Manual de usuario

PROAIM

PROAIM JB-VG12-01 Manual de usuario

PROAIM

PROAIM P-W5P24-BASE Manual de usuario

PROAIM

PROAIM Flycam 10 Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM Flycam SW-015-00 Manual de usuario

PROAIM

PROAIM Atlas V2 Manual de usuario

PROAIM

PROAIM Gladiator Action Dolly Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM CINEMA Series Manual de usuario

PROAIM

PROAIM SL-SKTE-0277 Manual de usuario

PROAIM

PROAIM CINEMA DL-CLBS-01 Manual de usuario

PROAIM

PROAIM Kite-22-Starter Manual de usuario

Manuales populares de Accesorios de vídeo profesionales de otras marcas

Yongnuo

Yongnuo YNSOFT Series Manual de usuario

Glidecam

Glidecam 2000 Pro Manual de usuario

Glide Gear

Glide Gear REVO 150 Manual de usuario

AUTOCUE

AUTOCUE SSPi Manual de usuario

Sony

Sony VCT-SP2BP Manual de usuario

MRMC

MRMC Polymotion Chat Studio 3.1.0 Manual de usuario

CDA-TEK

CDA-TEK AFX Manual de usuario

ARRI

ARRI TRINITY Manual de usuario

Senna

Senna One Minute Long Crane Manual de usuario

Ikan

Ikan PT4900S-PTZ Manual de usuario

Ikan

Ikan PT4200-P2P Manual de usuario

Ikan

Ikan PT4900-TK Manual de usuario

Filmcity

Filmcity FC-TP100 Manual de usuario

CDA-TEK

CDA-TEK PBC Manual de usuario

Flycam

Flycam Galaxy Arm & Vest Manual de usuario

Vinten

Vinten Osprey Plus S Manual de usuario

AUTOCUE

AUTOCUE iPad Lite Manual de usuario

AUTOCUE

AUTOCUE MSP17 Manual de usuario