PROAIM Spinhawk Professional Manual de usuario
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Spinhawk Professional 360° Rolling Video Camera Head
(GH-SPHK-01)
Assembly Manua l
Spinhawk Camera Head
Top Plate
Rod Adapter
2 x T-Type Allen Keys
(Sizes: 3/16mm, 6mm)
4 x Camera Bolts
(Sizes: 3/8” x 18mm)
2 x Camera Bolts
(Sizes: 3/8” x 12mm)
Base Plate
2
2.
Safety Hints
• Do not start operang the head unl you have read and understood the operang instrucon.
• The assembly of the head should be done with extreme cauon.
• Lack of aenon while assembling the head can cause substanal damage to equipment/operator.
• The head should be operated on a stable surface.
• To prevent any harm to your camera, make sure you securely place and lock your camera setup.
• A balancing knob and locking lever are integrated into the head to lock the camera setup securely.
• The locking levers on the head ensure that the top and boom plates holding the camera are both
locked.
• If they are not locked, there is a risk of the camera slipping due to the loosening frame.
• Make sure you do not exceed the maximum payload capacity. Otherwise, it may cause severe damage to
equipment.
2
• Push the locking lever on the both side of the
Spinhawk camera head upwards.
• Properly insert the base plate in the Spinhawk
camera head.
NOTE: There are strategically placed 3/8"-16
threaded holes for endless mounng
capabilies .
• Push the locking lever of the base plate
upward and insert the top plate.
• After inserting the top plate, push the locking
lever of the top plate downward and lock the
plate.
NOTE: It is Simple, Eecve, and one of the most
Aordable & High-Quality Gears designed for
worldwide professionals to achieve an
impressive 360° rotang scene with ulmate
precision.
Spinhawk Camera Head Setup
Assembling of Top & Boom plate
4
• Slide the camera plate by pressing the push
pin of the Fluid head and then remove the
plate.
• Attach the camera plate by matching it
properly with the threads of the Spinhawk.
• Attach the castle ring at the bottom of the
fluid head and then tighten it properly.
• Remove the castle ring of the Fluid Head (Not
Included) and mount it on the stand (Not
Included).
NOTE: You can use it with a heavy uid head to
get impressive footage with smooth pans,
controlled lts, and seamless transions.
• Aach the Rod Adapter by properly matching
it with the threads of the top plate and
properly ghten it using the screw driver (Not
Included).
Mounng of Fluid Head
Assembling of Rod Adapter
NOTE: There are 15mm rods support complete
your setup with accessories like a mae box
and follow focus & lens support.
5
• Loosen the balancing knob of the Spinhawk
camera head and rotate the plates of the
Spinhawk using the crank handle and then set
the posion of the plates accordingly.
• Open the wheeled crank handle of the
Spinhawk Camera Head.
NOTE: The head is equipped with an ergonomic
wheeled crank handle that lets you easily rotate
the rig and allows for more eortless visual
adjustment to specic posions.
• After rotating the plates of the Spinhawk,
properly tighten them using the balancing
knob.
NOTE: A balancing Knob & locking lever
integrated into the head ensures a secure
lock-o to the camera setup.
• Properly slide the camera on the Fluid Head.
NOTE: It securely mounts your lm video
camera equipped with 3/8"-16 mounng holes
to a tripod or uid head; you can even bolt the
head to the table, suing the availability.
360° Rotaion of Spinhawk
360° Rotaon of Spinhawk Camera Head with Ulmate Precision.
6
• After mounting the camera, tighten it
properly using the screw driver (Not
Included).
• Camera can also be mounted on the base
plate without the top plate, as shown in the
image.
• Insert the camera bolt in the base plate and
mount the camera by matching the camera
with the threads of the bolt.
Camera Mounng Setup
• Aach the Follow Focus (Not Included) to the
rods of the Rod Adapter and properly ghten
it with the red knob.
• Loosen the adjustment knob of the Rod
Adapter and set the position of the rods
accordingly.
• After setting the position of the rods,
properly tighten them using the adjustment
knob.
7
NOTE: The head is compable with praccally
all cameras on the market, including the Arri
Alexa mini/LF, Alexa LF, Alexa65, RED DSMC2
cameras, Sony Venice, Panavision cameras, and
of course, with your small or huge lenses.
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.
YOUR PROAIM SPINHAWK PROFESSIONAL ROLLING CAMERA HEAD
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios para cámaras de PROAIM
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM P-UTRA-01 Manual de usuario
PROAIM
PROAIM Jazz Autopan Camera Slider Manual de usuario
PROAIM
PROAIM P-LLBT-MTCL Manual de usuario
PROAIM
PROAIM CINEMA Series Manual de usuario
PROAIM
PROAIM 9CTH-TMP Manual de usuario
PROAIM
PROAIM Cambird Pro SL-CBPR-01 Manual de usuario
PROAIM
PROAIM Fly 22 Manual de usuario
PROAIM
PROAIM JK-ATV-01 Manual de usuario
PROAIM
PROAIM P-OHCP-01 Manual de usuario
PROAIM
PROAIM DL-BRZA-01 Manual de usuario
PROAIM
PROAIM P-BKST-02 Manual de usuario
PROAIM
PROAIM SR-SBP-02 Manual de usuario
PROAIM
PROAIM Cinema Series Magnus Manual de usuario
PROAIM
PROAIM P-OHCR-01 Manual de usuario
PROAIM
PROAIM Falcon P-FLCN Manual de usuario
PROAIM
PROAIM DP-18 Manual de usuario
PROAIM
PROAIM SL-ALPN-01 Manual de usuario
PROAIM
PROAIM P-FK-BL Manual de usuario
PROAIM
PROAIM P-G-PM Manual de usuario
