Planet Networking & Communication GSW-1601 Manual de usuario

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET 16-/24-Port

10/100/1000BASE-T Unmanaged Gigabit Ethernet Switch,

GSW-1601/GSW-2401. “Gigabit Ethernet Switch”

mentioned in this User’s Manual refers to the GSW-1601/

GSW-2401.

Open the box of the Gigabit Ethernet Switch and carefully

unpack it. The box should contain the following items:

Gigabit Ethernet Switch x 1 Power Cord x 1

Accessories x 1 User’s Manual x 1

If any of these are missing or damaged, please contact

your dealer immediately; if possible, retain the carton

including the original packing material, and use them again

to repack the product in case there is a need to return it to

us for repair.

Hardware Features

z100~240V AC, 0.3A, 50~60Hz universal power input

(GSW-1601)

z100~240V AC, 0.6A, 50~60Hz universal power input

(GSW-2401)

zFCC, CE class A compliant

3. Product Specications

Product GSW-1601 GSW-2401

Hardware Specications

Hardware Version 7

10/100/1000BASE-T

MDI/MDIX Ports 16 24

Throughput

(packet per second) 23.8Mpps 35.7Mpps

Switch Fabric 32Gbps 48Gbps

Weight 1.8kg 1.9kg

Power Consumption/

Dissipation 8.9 watts/30 BTU 13.5 watts/46

BTU

5. Switch Rear Panel

Figures 3 & 4 show the rear panelsof the GSW-1601 and

GSW-2401.

100-240V~ 50/60Hz 0.3A

Figure 3: GSW-1601 Rear Panel

Figure 4: GSW-2401 Rear Panel

Power

Note

1.The device is a power-required device,

meaning it will not work till it is powered. If

your network should be active all the time,

please consider using UPS (Uninterrupted

Power Supply) for your device. It will prevent

you from network data loss or network

downtime.

2.In some area, installing a surge suppression

device may also help to protect your Gigabit

Ethernet Switch from being damaged by

unregulated surge or current to the Switch or

the power adapter.

4. Switch Front Panel

Figures1 & 2 show the front panelsof the GSW-1601 and

GSW-2401.

PWR

4 6 8 10 12 14

LNK/ACT

1000

1357 119 13

LNK/ACT

1000

ACTLNK

1000 10/100

911 13 151 3 5 7

10 12 14 164 6 82

GSW-1601

16-Port Gigabit Ethernet Switch

Figure 1: GSW-1601 Front Panel

PWR

4 6 8 10 12 14 18

LNK/ACT

1000

1357 119 13 17

LNK/ACT

1000

ACTLNK

1000 10/100

911 13 151 3 5 7

10 12 14 16

17 19 21 23

18 20 22 244 6 82

GSW-2401

24-Port Gigabit Ethernet Switch

Figure 2:GSW-2401 Front Panel

2. Product Features

Physical Port

z16/24 10/100/1000BASE-T Gigabit Ethernet ports

zSupports auto MDI/MDI-X function

Layer 2 Features

zComplies with IEEE 802.3, 10BASE-T, IEEE 802.3u

100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet stan-

dards

zFeatures Store-and-Forward mode with wire-speed

ltering and forwarding rates

zIntegrated address look-up engine, supporting 8K abso-

lute MAC addresses

z10K Jumbo packet support

zPower Saving ability for Green networking

zIEEE 802.1Q VLAN packet transparency support

zIEEE 802.3x ow control for full duplex operation and

back pressure for half duplex operation

zHardware based 10/100BASE-TX, half/full duplex and

1000BASE-T full duplex mode, ow control and auto-

negotiation

zAutomatic address learning and address aging

zSupports CSMA/CD protocol

Power

Requirements

100~240V AC,

0.3A,

50-60Hz

100~240V AC,

0.6A,

50-60Hz

Dimensions

(W x D x H) 440 x 180 x 44mm, 1U height

Switch Processing

Scheme Store-and-Forward

Address Table 8K entries

Jumbo Packet Size 10K

Flow Control Back pressure for half duplex, IEEE

802.3x Pause Frame for full duplex

Temperature Operating: 0~50 degree C

Storage: -10~70 degree C

Humidity

Operating: 5% to 95%

(non-condensing)

Storage: 5% to 95%

(non-condensing)

Standards Conformance

Regulatory

Compliance FCC Part 15 Class A, CE

Standards

Compliance

IEEE 802.3 (Ethernet)

IEEE 802.3u (Fast Ethernet)

IEEE 802.3ab (Gigabit Ethernet)

IEEE 802.3x (Full-Duplex Flow

Control)

LED Indicators

GSW-1601/GSW-2401

System

LED Color Function

PWR Green Lights to indicate that the Switch has

power.

Per 10/100/1000BASE-T Port

LED Color Function

LNK/ACT Green

Lights to indicate the link through that

port is established successfully.

Blinks to indicate that the Switch is

actively sending or receiving data over

that port.

1000 Green

Lights to indicate the port is running

at 1000Mbps.

When off, it indicates that the port is

operating at 10/100Mbps.

6. Installing the Switch

This part describes how to install your Gigabit Ethernet

Switch and make connections to it. Please follow the

procedure below:

Note

This Gigabit Ethernet Switch does not need

software configuration.

Desktop Installation

To install the Gigabit Ethernet Switch on the desktop,

simply follow these steps:

Step 1: Attach the rubber feet to the recessed areas on

the bottom of the Gigabit Ethernet Switch.

Step 2: Place the Gigabit Ethernet Switch on the desktop

near an AC power source.

Step 3: Keep enough ventilation space between the

Gigabit Ethernet Switch and the surrounding

objects.

Note

When choosing a location, please keep in mind

the environmental restrictions discussed in

Section 3 under Product Specifications.

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

Step 4: Connect your Gigabit Ethernet Switch to network

devices.

A. Connect one end of a standard network cable

to the 10/100/1000BASE-T RJ45 ports on the

front of the Gigabit Ethernet Switch.

B. Connect the other end of the cable to the

network devices such as printer servers,

workstations or routers, etc.

Step 5: Supply power to the Gigabit Ethernet Switch.

A. Connect one end of the power cable to the

Gigabit Ethernet Switch.

B. Connect the power plug of the power cable to

a standard wall outlet.

When the Gigabit Ethernet Switch receives power, the

Power LED should remain solid Green.

Caution:

You must use the screws supplied with the mounting

brackets. Damage caused to the parts by using incorrect

screws would invalidate your warranty.

Step 3: Secure the brackets tightly.

Step 4: Follow the same steps to attach the second

bracket to the opposite side.

Step 5: After the brackets are attached to the Gigabit

Ethernet Switch, use suitable screws to securely

attach the brackets to the rack, as shown in

Figure 6.

9 11 13 151 3 5 7

10 12 14 16

17 19 21 23

18 20 22 244 6 82

GSW-2401

24-Port Gigabit Ethernet Switch

PWR

4 6 8 10 12 14 18

LNK/ACT

1000

1 3 5 7 119 13 17

LNK/ACT

1000

ACTLNK

1000 10/100

Figure 6: Mounting the Gigabit Ethernet Switch in a Rack

Step 6: Proceed with Steps 4 and 5 of Desktop Installation

to connect the network cabling and supply power

to your Gigabit Ethernet Switch.

Rack Mounting

To install the Gigabit Ethernet Switch in a 19-inch standard

rack, follow the instructions described below:

Step 1: Place your Gigabit Ethernet Switch on a hard at

surface, with the front panel positioned towards

your front side.

Step 2: Attach a rack-mount bracket to each side of the

Switch with supplied screws attached to the

package. Figure 5shows how to attach brackets to

one side of the Gigabit Ethernet Switch.

9 11 13 151 3 5 7

10 12 14 16

17 19 21 23

18 20 22 244 6 82

GSW-2401

24-Port Gigabit Ethernet Switch

PWR

4 6 8 10 12 14 18

LNK/ACT

1000

1 3 5 7 119 13 17

LNK/ACT

1000

ACTLNK

1000 10/100

Figure 5: Attaching the brackets to the Gigabit Ethernet Switch

Customer Support

Thank you for purchasing PLANET products. You can browse

our online FAQ resource on PLANET Web site rst to check

if it could solve your issue. If you need more support

information, please contact PLANET switch support team.

PLANET online FAQ:

http://www.planet.com.tw/en/support/faq.php?type=1

Switch support team mail address:

[email protected]

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other

trademarks belong to their respective owners.

EC Declaration of Conformity

For the following equipment:

*Type of Product : 16/24 -Port 10/100/1000T Gigabit Ethernet Switch

*Model Number : GSW-1601, GSW-2401

* Produced by:

Manufacturer‘s Name : Planet Technology Corp.

Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist.,

New Taipei City 231, Taiwan (R.O.C.).

is herewith confirmed to comply with the requirements set out in the Council Directive on the

Approximation of the Laws of the Member States relating to Electromagnetic Compatibility

Directive on 2014/30/EU; Low Voltage Directive 2014/35/EU.

For the evaluation regarding the EMC, the following standards were applied:

EN 55022 (2010 / AC:2011)

EN 61000-3-2 (2014)

EN 61000-3-3 (2013)

EN 55024 (2010)

IEC 61000-4-2 (2008)

IEC 61000-4-3 (2006+A1:2007+A2:2010)

IEC 61000-4-4 (2012)

IEC 61000-4-5 (2014)

IEC 61000-4-6 (2013)

IEC 61000-4-8 (2009)

IEC 61000-4-11 (2004)

EN 60950-1 (2006+A11:2009+A1:2010+A12:2011+A2: 2013)

Responsible for marking this declaration if the:

Manufacturer Authorized representative established within the EU

Authorized representative established within the EU (if applicable):

Company Name: Planet Technology Corp.

Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)

Person responsible for making this declaration

Name, Surname Kent Kang

Position / Title : Director

Taiwan 7 Oct., 2016

Place Date Legal Signature

PLANET TECHNOLOGY CORPORATION

e-mail: [email protected] http://www.planet.com.tw

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Planet Networking & Communication