Pilz PNOZ m EF 2MM Manual de usuario
PNOZ m EF 2MM
Operating Manual-1003107-EN-10
}Configurable, safe small controllers PNOZmulti 2
Preface
This document is the original document.
All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made
for the user's internal purposes. Suggestions and comments for improving this documenta-
tion will be gratefully received.
Source code from third-party manufacturers or open source software has been used for
some components. The relevant licence information is available on the Internet on the Pilz
homepage.
Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,
SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks
of Pilz GmbH & Co. KG in some countries.
SD means Secure Digital
Contents
Operating Manual PNOZ m EF 2MM
1003107-EN-10 3
Section 1 Introduction 6
1.1 Validity of documentation 6
1.2 Using the documentation 6
1.3 Definition of symbols 6
Section 2 Overview 8
2.1 Scope of supply 8
2.2 Unit features 8
2.3 Front view 9
Section 3 Safety 10
3.1 Intended use 10
3.2 System requirements 11
3.3 Safety regulations 11
3.3.1 Safety assessment 11
3.3.2 Use of qualified personnel 11
3.3.3 Warranty and liability 12
3.3.4 Disposal 12
3.3.5 For your safety 12
Section 4 Function description 13
4.1 Operation 13
4.2 Block diagram 13
4.3 Monitoring functions 13
4.3.1 Safe speed monitoring 13
4.3.2 Safe speed range monitoring 15
4.3.3 Safe direction monitoring 16
4.3.4 Safe operating stop monitoring 17
4.3.5 Safe stop 1 monitoring 18
4.3.6 Safe stop 2 monitoring 19
4.3.7 Safely limited acceleration monitoring (SLA-M) 21
4.3.8 Safely limited acceleration range monitoring (SAR-M) 22
4.3.9 Central motion monitoring functions 23
4.4 System reaction time 23
4.5 Proximity switch 24
4.6 Encoder 25
4.6.1 Output signals 26
4.6.2 Adapters for encoders 28
Section 5 Installation 29
5.1 General installation guidelines 29
5.2 Dimensions in mm 29
5.3 Connect the base unit and expansion modules 30
Section 6 Commissioning 31
6.1 Wiring 31
6.2 Pin assignment of Mini-IO socket 31
Contents
Operating Manual PNOZ m EF 2MM
1003107-EN-10 4
6.3 Connection of proximity switches 32
6.4 Connection of an encoder 33
6.4.1 Connect encoder 34
6.4.2 Connect encoder with Z index 34
6.4.3 Connect encoder via an adapter 35
6.5 Connection of proximity switch and encoder 35
6.6 EMC-compliant wiring 37
6.7 Download modified project to the PNOZmulti system 40
Section 7 Operation 42
7.1 LED indicators 42
7.2 Behaviour with implausible sensor signals 42
Section 8 Technical details 44
8.1 Safety characteristic data 46
Section 9 Supplementary data 48
9.1 Categories 48
9.1.1 Safety level 48
9.1.2 Safety functions 49
9.1.3 Safety-related characteristic data for operation with non-safety-related en-
coder without additional requirements
50
9.1.3.1 Permitted sensor types and output signals 50
9.1.3.2 Safety-related architecture 50
9.1.3.3 Achievable safety level 50
9.1.4 Safety-related characteristic data for operation with non-safety-related en-
coder with mechanical fault exclusion
51
9.1.4.1 Permitted sensor types and output signals 51
9.1.4.2 Safety-related architecture 51
9.1.4.3 Achievable safety level 52
9.1.5 Safety-related characteristic data for operation with non-safety-related en-
coder with diagnostics via the drive controller
52
9.1.5.1 Permitted sensor types and output signals 52
9.1.5.2 Requirements of the drive controller 52
9.1.5.3 Safety-related architecture 53
9.1.5.4 Achievable safety level 53
9.1.6 Safety-related characteristic data for operation with a safe encoder 54
9.1.6.1 Permitted sensor types and output signals 54
9.1.6.2 Safety-related architecture 54
9.1.6.3 Achievable safety level 55
9.1.7 Safety-related characteristic data for operation with a safe encoder with Z
index
55
9.1.7.1 Permitted sensor types and output signals 55
9.1.7.2 Safety-related architecture 55
9.1.7.3 Achievable safety level 56
9.1.8 Safety-related characteristic data for operation with non-safety-related en-
coder and proximity switch
56
9.1.8.1 Permitted sensor types and output signals 56
Contents
Operating Manual PNOZ m EF 2MM
1003107-EN-10 5
9.1.8.2 Safety-related architecture 57
9.1.8.3 Achievable safety level 57
9.1.9 Safety-related characteristic data for operation with 2 proximity switches 58
9.1.9.1 Permitted sensor types and output signals 58
9.1.9.2 Safety-related architecture 58
9.1.9.3 Achievable safety level 59
Section 10 Order reference 60
10.1 Product 60
10.2 Accessories 60
Introduction
Operating Manual PNOZ m EF 2MM
1003107-EN-10 6
1 Introduction
1.1 Validity of documentation
This documentation is valid for the product PNOZ m EF 2MM from Version 2.2.
This operating manual explains the function and operation, describes the installation and
provides guidelines on how to connect the product.
1.2 Using the documentation
This document is intended for instruction. Only install and commission the product if you
have read and understood this document. The document should be retained for future ref-
erence.
1.3 Definition of symbols
Information that is particularly important is identified as follows:
DANGER!
This warning must be heeded! It warns of a hazardous situation that poses
an immediate threat of serious injury and death and indicates preventive
measures that can be taken.
WARNING!
This warning must be heeded! It warns of a hazardous situation that could
lead to serious injury and death and indicates preventive measures that can
be taken.
CAUTION!
This refers to a hazard that can lead to a less serious or minor injury plus
material damage, and also provides information on preventive measures
that can be taken.
NOTICE
This describes a situation in which the product or devices could be dam-
aged and also provides information on preventive measures that can be
taken. It also highlights areas within the text that are of particular import-
ance.
Introduction
Operating Manual PNOZ m EF 2MM
1003107-EN-10 7
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
Overview
Operating Manual PNOZ m EF 2MM
1003107-EN-10 8
2 Overview
2.1 Scope of supply
}Expansion module PNOZ m EF 2MM
}Jumper
2.2 Unit features
Application of the product PNOZ m EF 2MM:
Expansion module for connection to a base unit from the PNOZmulti 2 system.
The product has the following features:
}Can be configured in the PNOZmulti Configurator
}Monitoring of 2 independent axes
}Measured value recorded by proximity switch and encoder
}Monitoring functions
– Safe speed monitoring (SSM)
– Safe speed range monitoring (SSR-M)
– Safe direction of movement monitoring (SDI-M)
– Safe operating stop monitoring (SOS-M)
– Safe stop 1 monitoring (SS1-M)
– Safe stop 2 monitoring (SS2-M)
– Safely limited acceleration monitoring (SLA-M)
– Safely limited acceleration range monitoring (SAR-M)
– Analogue voltage (track S)
}LED display for:
– Supply voltage
– Diagnostics
– Axis status
– Fault
}Please refer to the document "PNOZmulti System Expansion" for details of the base
units PNOZmulti 2 that can be connected.
}Plug-in connection terminals:
Either spring-loaded terminal or screw terminal available as an accessory (see Order
references for accessories).
Overview
Operating Manual PNOZ m EF 2MM
1003107-EN-10 9
2.3 Front view
Legend:
}X4: Connection for proximity switch at axis1
}X3: Connection for proximity switch at axis2
}X12: Mini IO socket for connecting encoder or proximity switch at axis 1
}X22: Mini IO socket for connecting encoder or proximity switch at axis 2
}LEDs:
– Power
– Run
– Diag
– Fault
– Axis 1
– Axis 2
Safety
Operating Manual PNOZ m EF 2MM
1003107-EN-10 10
3 Safety
3.1 Intended use
The motion monitoring expansion module monitors safety functions in accordance with
EN61800-5-2 for safe motion monitoring.
The following monitoring functions are performed:
}Safe direction monitoring (SDI-M)
}Safe operating stop monitoring (SOS-M)
}Safe speed range monitoring (SSR-M)
}Safe speed monitoring (SSM)
}Safe stop 1 monitoring (SS1-M)
}Safe stop 2 monitoring (SS2-M)
}Safely limited acceleration monitoring (SLA-M)
}Safely limited acceleration range monitoring (SAR-M)
The expansion module meets the requirements of ENIEC61508 up to SIL3 and
ENISO13849-1 up to PLe.
The expansion module may only be connected to a base unit from the configurable system
PNOZmulti 2 (please refer to the document "PNOZmulti System Expansion" for details of
the base units that can be connected).
The configurable system PNOZmulti 2 is used for the safety-related interruption of safety
circuits and is designed for use in:
}Emergency stop equipment
}Safety circuits in accordance with VDE0113 Part 1 and EN60204-1
}The product PNOZ m EF 2MM meets the requirements of the standards EN 81-20, EN
81-22 and EN 81-50, harmonised under the Lifts Directive 2014/33/EU, and the require-
ments of the standard EN 115-1, harmonised under the Machinery Directive 2006/42/
EC.
}The programmable safety system should be installed in a protected environment that
meets at least the requirements of pollution degree 2.
Example: Protected inside space or control cabinet with protection type IP54 and cor-
responding air conditioning.
The following is deemed improper use in particular
}Any component, technical or electrical modification to the product,
}Use of the product outside the areas described in this manual,
}Use of the product outside the technical details (see Technical details [ 44]).
Tabla de contenidos
Otros manuales de Unidad de control de Pilz
Pilz
Pilz P1HZ X1 Manual de usuario
Pilz
Pilz PNOZ mc6p Manual de usuario
Pilz
Pilz PSSu K S RS232 Modbus ASCII Manual de usuario
Pilz
Pilz PSSu E F 2DI 60-R Manual de usuario
Pilz
Pilz PSSu K F EI CV Manual de usuario
Pilz
Pilz PNOZ m EF 16DI Manual de usuario
Pilz
Pilz PZE X4VP4 Manual de usuario
Pilz
Pilz PNOZ mc1p Manual de usuario
Pilz
Pilz PNOZ m0p Manual de usuario
Pilz
Pilz PNOZ m ES CANopen Manual de usuario
Pilz
Pilz PIT gb Series Manual de usuario
Pilz
Pilz PNOZ ms1p Manual de usuario
Pilz
Pilz PSSu E F PS2 Manual de usuario
Pilz
Pilz PIT m3.3p Manual de usuario
Pilz
Pilz PNOZ m0p Manual de usuario
Pilz
Pilz PNOZ mc7p Manual de usuario
Pilz
Pilz PSEN cs5.11n Manual de usuario
Pilz
Pilz PNOZ mc5.1p Manual de usuario
Pilz
Pilz PNOZ s11 Manual de usuario
Pilz
Pilz PZE 7 Manual de usuario
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
